Preliminary calibration results of VEGA 1 and 2 SIGMA-3 gas chromatograph

SIGMA - 3 gas chromatograph on board VEGA 1 and 2 landing probes has been operated successfully in the 60 - 50 km altitude range, providing several in - situ chemical analysis of the gas and the aerosols of Venus cloud layers. Post flight calibration required to derive atmospheric abundancies from gas chromatograms were carried out using the SIGMA - 3 spare model. A Venus atmospheric aerosol simulation chamber was used in which sulfuric acid droplets were generated. Preliminary results of these calibration experiments indicate that the concentration of sulfuric acid in the upper part of the clouds ( 60 to 55 km) is about 1 mg/m³ and suggest that an additional constituant must be present in noticeable amount in the aerosols. From these experiments the mixing ratio upper limits of SO₂ is 100 ppmV and of H₂S and COS is few 10 ppmV.     

Nonlinear target enhancement for the hostile nuclear environment

A necessary requirement of a strategic defence system is the detection of incoming nuclear warheads in an environment that may include nuclear detonations of undetected or missed target warheads. A computer model which simulates incoming warheads as distant endoatmospheric targets is described. A model of the electromagnetic noise expected in the nuclear environment is developed. Predicted atmospheric effects are also included. The ability of nonlinear image enhancement algorithms to their ability to suppress the noise and atmospheric effects of the nuclear environment is examined. These algorithms are then tested, using the combined target and noise models, and evaluated in terms of noise removal and their ability to resolve closely spaced targets     

MLS: a total system approach

A typical approach and landing operation is described. The microwave landing system (MLS) is then examined, its design characteristics and how it works are shown, and how the MLS design fulfils the user's operational requirements by protecting the guidance signal from reflected signal interference is highlighted. MLS angle system accuracy is discussed in great detail, and its reliability, integrity, and coverage volume are briefly considered. MLS availability at any runway to all aircraft types and their landing scenarios, which is accomplished using narrow scanning beam antennas, is examined     

Dynamics and control of an orbiting flexible mobile manipulator

This paper presents a Lagrangian formulation for studying the dynamics and control of the proposed Space Station based Mobile Servicing System (MSS) for a particular case of inplane libration and maneuvers. The simplified case is purposely considered to help focus on the effects of structural and joint flexibility parameters of the MSS on the complex interactions between the station and manipulator dynamics during slewing and translational maneuvers. The response results suggest that under critical combinations of parameters, the system can become unstable. During maneuvers, the deflection of the MSS can become excessive, leading to positioning error of the payload. At the same time the libration error can also be significant. A linear quadratic regulator is designed to control the deflection of the manipulator and maintain the station at its operating configuration.     

The role of repair in the survival of mammalian cells from heavy ion irradiation: approximation to the ideal case of target theory.

Theories of cellular radiation sensitivity that preclude a significant role for cellular repair processes in the final biological expression of cellular damage induced by ionizing radiation are unsound. Experiments are discussed here in which the cell-cycle dependency of the repair deficiency of the S/S variant, of the L5178Y murine leukemic lymphoblast was examined by treatment with the heavy ions, 20Ne, 28Si, 40Ar, 56Fe and 93Nb. Evidence from those studies, which will be described in detail elsewhere, provide support for the notion that as the linear energy transfer (LET infinity) of the incident radiation increases the ability of the S/S cell to repair radiation damage decreases until effectively it is eliminated around 500 keV/micrometer. In the region of the latter LET infinity value, the behavior of the S/S cell approximates the ideal case of target theory where post-irradiation metabolism (repair) does not influence cell survival. The expression of this phenomenon among different cell types and tissues will depend upon the actual repair systems involved and other considerations.     

Space experiments aboard the Lomonosov MSU satellite

At present, the Institute of Nuclear Physics of Moscow State University, in cooperation with other organizations, is preparing space experiments onboard the Lomonosov satellite. The main goal of this mission is to study extreme astrophysical phenomena such as cosmic gamma-ray bursts and ultra-high-energy cosmic rays. These phenomena are associated with the processes occurring in the early universe in very distant astrophysical objects, therefore, they can provide information on the first stages of the evolution of the universe. This paper considers the main characteristics of the scientific equipment aboard the Lomonosov satellite.     

Mercury’s Weather-Beaten Surface: Understanding Mercury in the Context of Lunar and Asteroidal Space Weathering Studies

Mercury’s regolith, derived from the crustal bedrock, has been altered by a set of space weathering processes. Before we can interpret crustal composition, it is necessary to understand the nature of these surface alterations. The processes that space weather the surface are the same as those that form Mercury’s exosphere (micrometeoroid flux and solar wind interactions) and are moderated by the local space environment and the presence of a global magnetic field. To comprehend how space weathering acts on Mercury’s regolith, an understanding is needed of how contributing processes act as an interactive system. As no direct information (e.g., from returned samples) is available about how the system of space weathering affects Mercury’s regolith, we use as a basis for comparison the current understanding of these same processes on lunar and asteroidal regoliths as well as laboratory simulations. These comparisons suggest that Mercury’s regolith is overturned more frequently (though the characteristic surface time for a grain is unknown even relative to the lunar case), more than an order of magnitude more melt and vapor per unit time and unit area is produced by impact processes than on the Moon (creating a higher glass content via grain coatings and agglutinates), the degree of surface irradiation is comparable to or greater than that on the Moon, and photon irradiation is up to an order of magnitude greater (creating amorphous grain rims, chemically reducing the upper layers of grains to produce nanometer-scale particles of metallic iron, and depleting surface grains in volatile elements and alkali metals). The processes that chemically reduce the surface and produce nanometer-scale particles on Mercury are suggested to be more effective than similar processes on the Moon. Estimated abundances of nanometer-scale particles can account for Mercury’s dark surface relative to that of the Moon without requiring macroscopic grains of opaque minerals. The presence of nanometer-scale particles may also account for Mercury’s relatively featureless visible–near-infrared reflectance spectra. Characteristics of material returned from asteroid 25143 Itokawa demonstrate that this nanometer-scale material need not be pure iron, raising the possibility that the nanometer-scale material on Mercury may have a composition different from iron metal [such as (Fe,Mg)S]. The expected depletion of volatiles and particularly alkali metals from solar-wind interaction processes are inconsistent with the detection of sodium, potassium, and sulfur within the regolith. One plausible explanation invokes a larger fine fraction (grain size <45 μm) and more radiation-damaged grains than in the lunar surface material to create a regolith that is a more efficient reservoir for these volatiles. By this view the volatile elements detected are present not only within the grain structures, but also as adsorbates within the regolith and deposits on the surfaces of the regolith grains. The comparisons with findings from the Moon and asteroids provide a basis for predicting how compositional modifications induced by space weathering have affected Mercury’s surface composition.     

HED Meteorites and Their Relationship to the Geology of Vesta and the Dawn Mission

Howardite-eucrite-diogenite (HED) meteorites, thought to be derived from 4 Vesta, provide the best sampling available for any differentiated asteroid. However, deviations in oxygen isotopic composition from a common mass-fractionation line suggest that a few eucrite-like meteorites are from other bodies, or that Vesta was not completely homogenized during differentiation. The petrology and geochemistry of HEDs provide insights into igneous processes that produced a crust composed of basalts, gabbros, and ultramafic cumulate rocks. Although most HED magmas were fractionated, it is unresolved whether some eucrites may have been primary melts. The geochemistry of HEDs indicates that bulk Vesta is depleted in volatile elements and is relatively reduced, but has chondritic refractory element abundances. The compositions of HEDs may favor a magma ocean model, but inconsistencies remain. Geochronology indicates that Vesta accreted and differentiated within the first several million years of solar system history, that magmatism continued over a span of ??10 Myr, and that its thermal history extended for perhaps 100 Myr. The protracted cooling history is probably responsible for thermal metamorphism of most HEDs. Impact chronology indicates that Vesta experienced many significant collisions, including during the late heavy bombardment. The age of the huge south pole crater is controversial, but it probably ejected Vestoids and many HEDs. Continued impacts produced a regolith composed of eucrite and diogenite fragments containing only minor exotic materials. HED meteorites serve as ground truth for orbital spectroscopic and chemical analyses by the Dawn spacecraft, and their properties are critical for instrument calibration and interpretation of Vesta??s geologic history.     

Advanced materials for next generation NiMH portable, HEV and EVbatteries

While Ovonic NiMH batteries are already in high volume commercial production for portable applications, advances in materials technology have enabled performance improvements in specific energy (100 Wh/kg), specific power (600-1000 W/kg), high temperature operation, charge retention, and voltage stability. Concurrent with technology advances, Ovonic NiMH batteries have established performance and commercial milestones in electric vehicles, hybrid electric vehicles, as well as scooter, motorcycle and bicycle applications. As important as these advances, significant manufacturing cost reductions have also occurred which allow continued growth of NiMH technology. In this paper, advances in performance, applications and cost reduction are discussed with particular emphasis on the improved proprietary metal hydride and nickel hydroxide materials that make such advances possible     

Modeling Piecewise-Linear Systems by Topological Techniques

Flowgraph techniques are extended to systems with piecewise-linear characteristics by developing criteria for construction of an optimum model from related subregions in which linearity holds. This requires the synthesis of several known techniques and results in a wide range of useful applications including: 1) devices with nonlinear characteristics which may be considered as linear over certain subregions; 2) networks whose response to changes in applied signal frequency or magnitude may be approximated by piecewise-linear asymptotes; 3) systems processing two or more signals simultaneously with different transfer or immitance characteristics for each signal; 4) circuits approximated by different equivalent circuits depending on the numerical values of critical parameters. Representative examples will illustrate these and similar applications. Procedures are presented to provide a logical, orderly, and effective approach to construct a model, to determine figures of merit, and to optimize the model for a prescribed region of operation or for a desired range of parameters.