The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

航空制造中常用材料焊接的性能浅谈

在航空工业中,无论是飞机、发动机或机载设备的制造都广泛采用了各种焊接技术。航空产品的结构愈来愈复杂,对性能和可靠性的要求愈来愈高,对寿命的要求则愈来愈长,焊接正在从粗加工向精加工方向发展,各种焊接方法过程精细控制已成为必需。质量是航空产品的生命线,航空零件更高的焊接质量,一直是焊接科技人员的目标。     

航空发动机寿命分析与监测方法

讨论了航空发动机主要零部件的典型应力谱及寿命分析和监测方法,得到了有意义的结论。     

INTERBALL statistical study of ion flow fluctuations in the plasma sheet

We use ion distribution measurements with CORALL instrument on-board the INTERBALL/Tail spacecraft to study plasma flows in the mid-tail (−9> X> −27 R_E) plasma sheet. Three velocity components computed every 2 minutes exhibit two types of velocity variations: Earthward bursty bulk flows (BBFs) and random flow fluctuations. Their properties are in a good agreement with the observations of the ISEE-2 spacecraft (Borovsky et al., 1997). The INTERBALL/Tail spacecraft configuration favors measurements of V_z component, in contrast to previous experiments in which only V_x and V_y were measured reliably. In the outer part of the plasma sheet V_y and V_z fluctuations were close to each other (variances σ(V_y) and σ(V_z) were about 160 and 110 km/s, respectively), but in the inner part at the dusk flank amplitude of V_y fluctuations increased and was 2 times higher than that of V_z component. This asymmetry of fluctuations should be taken into account during modern theoretical analysis and simulations.     

Formation of large-scale vortices in shear flows of the lower atmosphere of the earth in the region of tropical latitudes

The paper is devoted to studying the mechanisms of formation of cyclones in the Earth’s atmosphere with the help of numerical modeling using the complete system of gas-dynamic equations. The results of modeling have shown that cyclones can appear in horizontal stratified shear flows of warm and wet air masses with horizontal direction of gradients of the wind velocity components as a result of small disturbances of pressure which can be produced by Rossby waves.     

ToF相机在空间非合作目标近距离测量中的应用

针对已有测量手段在空间非合作目标近距离测量中的问题,本文主要分析了ToF（Time-of-Flight）相机在空间应用中的可能性。首先总结了空间非合作目标近距离测量现状及已有测量手段;随后介绍了ToF相机的原理及发展,并以非合作目标典型特征为例对其性能指标进行分析;接着将ToF相机与现有空间近距离测量手段进行性能比较;并对其中的关键技术进行梳理;最后对ToF相机的未来发展趋势及其在空间中的应用进行展望。     

内压缩段构型对高超声速进气道自起动性能的影响

为了探寻内压缩段构型对高超声速进气道自起动性能的影响,对二元高超声速进气道折角型和曲线型两种内压缩段的自起动过程进行准定常数值仿真研究.对比了这两种构型进气道在不同唇罩起始压缩角下的自起动性能和自起动过程中分离区的变化规律,并分析了内通道压缩强度沿程分布对进气道自起动性能的影响.研究表明:①即使进气道内收缩段的内收缩比相同,不同的内压缩段构型和唇罩起始压缩角对高超声速进气道的自起动性能影响显著,曲线型内压缩段构型的自起动性能明显优于折角型;②内压缩段的总压缩强度及其沿流向分布都是影响高超声速进气道自起动性能的关键因素,并且压缩强度沿流向分布决定着进气道在自起动过程中处于临界状态下主分离包所停留的位置.      

叶片包容性计算的软件实现

基于英国和俄罗斯叶片包容性设计方法和理论,应用VB语言开发了叶片包容性计算软件。以某型发动机第1级涡轮叶片为例,用该软件计算了叶片包容性和满足包容性条件下的最小机匣厚度。根据实际要求,也可以用该软件确定满足包容性要求的各设计参数     

如何考虑工程模拟器的逼真度和有效性

工程模拟器的模拟逼其变和有效性是工程模拟界普遍关心的一个非常重要的问题.本文根据SB—100飞行模拟器系统综合、试验和验收过程中的一些做法及模拟试验结果和试飞结果的对比讨论了模拟的逼真度和有效性问题.