Influence of Body Waves,Instrumentation Resonances,and Prior Assumptions on Rayleigh Wave Ellipticity Inversion for Shallow Structure at the InSight Landing Site

Based on an updated model of the regolith’s elastic properties, we simulate the ambient vibrations background wavefield recorded by InSight’s Seismic Experiment for Interior Structure (SEIS) on Mars to characterise the influence of the regolith and invert SEIS data for shallow subsurface structure. By approximately scaling the synthetics based on seismic signals of a terrestrial dust devil, we find that the high-frequency atmospheric background wavefield should be above the self-noise of SEIS’s SP sensors, even if the signals are not produced within 100–200 m of the station. We compare horizontal-to-vertical spectral ratios and Rayleigh wave ellipticity curves for a surface-wave based simulation on the one hand with synthetics explicitly considering body waves on the other hand and do not find any striking differences. Inverting the data, we find that the results are insensitive to assumptions on density. By contrast, assumptions on the velocity range in the upper-most layer have a strong influence on the results also at larger depth. Wrong assumptions can lead to results far from the true model in this case. Additional information on the general shape of the curve, i.e. single or dual peak, could help to mitigate this effect, even if it cannot directly be included into the inversion. We find that the ellipticity curves can provide stronger constraints on the minimum thickness and velocity of the second layer of the model than on the maximum values. We also consider the effect of instrumentation resonances caused by the lander flexible modes, solar panels, and the SEIS levelling system. Both the levelling system resonances and the lander flexible modes occur at significantly higher frequencies than the expected structural response, i.e. above 35 Hz and 20 Hz, respectively. While the lander and solar panel resonances might be too weak in amplitude to be recorded by SEIS, the levelling system resonances will show up clearly in horizontal spectra, the H/V and ellipticity curves. They are not removed by trying to extract only Rayleigh-wave dominated parts of the data. However, they can be distinguished from any subsurface response by their exceptionally low damping ratios of 1% or less as determined by random decrement analysis. The same applies to lander-generated signals observed in actual data from a Moon analogue experiment, so we expect this analysis will be useful in identifying instrumentation resonances in SEIS data.     

Dynamics of Quasi-Biennal Variations of Cosmic Rays and Solar Activity

The quasi-biennial variations in the flux of galactic cosmic rays (GCRs) have been studied based on the data of stratospheric sensing and measurements by neutron monitors, as well as in various manifestations of solar activity and interplanetary medium parameters. It has been shown that quasi-biennial GCR variations are caused by variations with the same period in the mean magnetic field of the Sun that coincide with them over time and have been identified in the anti-phase, which respond to the sign of this field. The variations in the quasi-biennial cosmic ray are caused by quasi-biennial variations in the mean magnetic field of the Sun via the quasi-biennial variations in the interplanetary magnetic field.     

Influence Analysis of the Second Bypass Air Bleed Parameters on the Engine Performance

This paper considers double bypass aircraft engine with controlled air bleed to the second bypass duct. Its performance is evaluated by mathematical modeling techniques. The second bypass air bleed amount is determined to provide the best engine efficiency at various operating modes.     

The Dynamics of a Satellite-Gyrostat with a Single Nonzero Component of the Vector of Gyrostatic Moment

The dynamics of a satellite-gyrostat moving in the central Newtonian force field along a circular orbit is studied. In the particular case when the vector of gyrostatic moment is parallel to one of the satellite’s principal central axes of inertia, all the equilibrium states are determined. For each equilibrium orientation, sufficient conditions of stability are obtained as a result of the analysis of the generalized energy integral, and necessary conditions of stability are determined as a result of analysis of the linearized equations of motion. The evolution of regions of validity for the conditions of stability of equilibrium positions are studied in detail depending on the parameters of the problem. All the bifurcation values of the parameters at which qualitative changes of the regions of stability take place are determined.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 4, 2005, pp. 283–294.Original Russian Text Copyright © 2005 by Sarychev, Mirer, Degtyarev.     

The Venus ionosphere

Physical properties of the Venus ionosphere obtained by experiments on the US Pioneer Venus and the Soviet Venera missions are presented in the form of models suitable for inclusion in the Venus International Reference Atmosphere. The models comprise electron density (from 120 km), electron and ion temperatures, and relative ion abundance in the altitude range from 150 km to 1000 km for solar zenith angles from 0° to 180°. In addition, information on ion transport velocities, ionopause altitudes, and magnetic field characteristics of the Venus ionosphere, are presented in tabular or graphical form. Also discussed is the solar control of the physical properties of the Venus ionosphere.     

Composition of the Venus atmosphere below 100 km altitude

Our current knowledge on the composition of the Venus atmosphere in the altitude range from the surface to 100 km is compiled. Gases that have been measured, and whose mixing ratios are assumed to be constant with altitude, are CO₂, N₂, He, Ne, Ar, and Kr. Gases that have been identified in the lower and/or middle atmosphere, but whose mixing ratios may depend on altitude, latitude and/or local time, are CO, H₂O, HCl, HF, and SO₂. Conflicting data or only upper limits exist on some important trace gases, such as O₂, H₂, and Cl₂. The latter two are key constituents in the photochemistry of the middle atmosphere of Venus. The chapter concludes with a listing of the isotopic abundances of elements measured in the Venus atmosphere.     

Stability Analysis of a Buck Regulator Employing Input Filter Compensation

The interaction between the input filter and the regulator often causes serious degradation of performance. The reduction in loop gain due to input filter interaction can result in system instability. An exact stability analysis of the buck regulator system is presented. The input filter parameter values are varied and system instability is predicted for the case without feedforward. The eigenvalues of the system can be brought back into the unit circle and the system thus stabilized with the addition of the feedforward loop. Measurements made for the cases with and without feedforward confirm the analytical prediction.     

Nickel-Cadmium Batteries as Capacitive Filters for Pulsed Loads

This investigation consisted of several tests of specially fabricated nickel-cadmium batteries having circular disk-type electrodes. These batteries were evaluated as filter elements between a constant current power supply and a 5 Hz pulsed load demanding approximately twice the power supply current during the load on a portion of the cycle. Short tests lasting 104 cycles were conducted at up to a 21 C rate and an equivalent energy density of over 40 J/Ib. In addition, two batteries were subjected to 10h dischar cycles, one at a 6.5 C rate and the other at a 13 C rate. Assuming an electrode-to-battery weight ratio of 0.5, these tests represent an energy density of about 7 and 14 J/Ib, respectively. Energy density, efficiency, capacitance, average voltage, and available capacity were tracked during these tests. After 10y capacity degradation was negligible for one battery and about 20 percent for the other. Cadmium electrode failure may be the factor limiting lifetime at extremely low depth of discharge cycling. The output was examined and a simple equivalent circuit was proposed.     

Extraction of mineral elements from inedible wastes of biological components of a life-support system and their utilization for plant nutrition.

Two methods of extracting mineral elements from otherwise deadlock products of a life-support system are presented. We describe first optimum conditions for recovering elements by water extraction from dry wastes of plants, biomass ash, and solid human wastes after passing them through the catalytic furnace; and, second, we describe acid extracts of biogenous elements by 1N and 2N HNO3 from these products. Ways to use the extracts of elements in plant nutrition are considered in order to increase the extent to which the mineral loop of a life-support system can be closed.