The microbial habitability of weathered volcanic glass inferred from continuous sensing techniques

Basaltic glasses (hyaloclastite) are a widespread habitat for life in volcanic environments, yet their interior physical conditions are poorly characterized. We investigated the characteristics of exposed weathered basaltic glass from a surface outcrop in Iceland, using microprobes capable of continuous sensing, to determine whether the physical conditions in the rock interior are hospitable to microbial life. The material provided thermal protection from freeze-thaw and rapid temperature fluctuations, similar to data reported for other rock types. Water activity experiments showed that at moisture contents less than 13% wet weight, the glass and its weathering product, palagonite, had a water activity below levels suitable for bacterial growth. In pore spaces, however, these higher moisture conditions might be maintained for many days after a precipitation event. Gas exchange between the rock interior and exterior was rapid (< 10 min) when the rocks were dry, but when saturated with water, equilibration took many hours. During this period, we demonstrated the potential for low oxygen conditions within the rock caused by respiratory stimulation of the heterotrophic community within. These conditions might exist within subglacial environments during the formation of the rocks or in micro-environments in the interior of exposed rocks. The experiments showed that microbial communities at the site studied here could potentially be active for 39% of the year, if the depth of the community within the outcrop maintains a balance between access to liquid water and adequate protection from freezing. In the absence of precipitation, the interior of weathered basaltic glass is an extreme and life-limiting environment for microorganisms on Earth and other planets.     

Thyrotropin receptor and membrane interactions in FRTL-5 thyroid cell strain in microgravity

The aim of this work was to analyze the possible alteration of thyrotropin (TSH) receptors in microgravity, which could explain the absence of thyroid cell proliferation in the space environment. Several forms of the TSH receptor are localized on the plasma membrane associated with caveolae and lipid rafts. The TSH regulates the fluidity of the cell membrane and the presence of its receptors in microdomains that are rich in sphingomyelin and cholesterol. TSH also stimulates cyclic adenosine monophosphate (cAMP) accumulation and cell proliferation. Reported here are the results of an experiment in which the FRTL-5 thyroid cell line was exposed to microgravity during the Texus-44 mission (launched February 7, 2008, from Kiruna, Sweden). When the parabolic flight brought the sounding rocket to an altitude of 264?km, the culture media were injected with or without TSH in the different samples, and weightlessness prevailed on board for 6 minutes and 19 seconds. Control experiments were performed, in parallel, in an onboard 1g centrifuge and on the ground in Kiruna laboratory. Cell morphology and function were analyzed. Results show that in microgravity conditions the cells do not respond to TSH treatment and present an irregular shape with condensed chromatin, a modification of the cell membrane with shedding of the TSH receptor in the culture medium, and an increase of sphingomyelin-synthase and Bax proteins. It is possible that real microgravity induces a rearrangement of specific sections of the cell membrane, which act as platforms for molecular receptors, thus influencing thyroid cell function in astronauts during space missions.     

Global Properties of Solar Flares

This article broadly reviews our knowledge of solar flares. There is a particular focus on their global properties, as opposed to the microphysics such as that needed for magnetic reconnection or particle acceleration as such. Indeed solar flares will always remain in the domain of remote sensing, so we cannot observe the microscales directly and must understand the basic physics entirely via the global properties plus theoretical inference. The global observables include the general energetics—radiation in flares and mass loss in coronal mass ejections (CMEs)—and the formation of different kinds of ejection and global wave disturbance: the type II radio-burst exciter, the Moreton wave, the EIT “wave”, and the “sunquake” acoustic waves in the solar interior. Flare radiation and CME kinetic energy can have comparable magnitudes, of order 10³² erg each for an X-class event, with the bulk of the radiant energy in the visible-UV continuum. We argue that the impulsive phase of the flare dominates the energetics of all of these manifestations, and also point out that energy and momentum in this phase largely reside in the electromagnetic field, not in the observable plasma.     

Design of a canard configured TransCruiser using CEASIOM

CEASIOM is a multidisciplinary software environment for aircraft design that has been developed as part of the European Framework 6 SimSAC project. It closely integrates discipline-specific tools such as those used for CAD, grid generation, CFD, stability analysis and control system design. The environment allows the user to take an initial design from geometry definition and aerodynamics generation through to full six degrees of freedom simulation and analysis. Key capabilities include variable fidelity aerodynamics tools and aeroelasticity modules. The purpose of this paper is to demonstrate the potential of CEASIOM by presenting the results of a Design, Simulate and Evaluate (DSE) exercise applied to a novel, project specific, transonic cruiser configuration called the TCR. The baseline TCR configuration is first defined using conventional methods, which is then refined and improved within the CEASIOM software environment. A wind tunnel model of this final configuration was then constructed, tested and used to verify the results generated using CEASIOM.     

Application of the parameter-averaging method to calculations of gas ejectors with cylindrical mixing chambers

In this paper, one of the most possible methods for calculations of ejector devices equipped with the cylindrical mixing chambers is considered; the method is based on averaging the flow parameters at the chamber inlet. We present the calculation results and their comparison with the earlier published data, as well as the quantitative assessment of this method and feasibilities of its use for different technical devices embodying the concept of ejection.     

Heat transfer at various methods of thermal protection in the systems of power-driven gas turbine plants (GTP)

The scheme variants of implementing the thermal protection against heat flows being generated by the body of a high-temperature stationary gas turbine engine (GTE) are presented. The scheme of the experimental bench with a working section is given. Methodical approaches to the heat transfer calculation at different variants of forced and natural convection organization and under various operating conditions are described. The generalized results of the experiments carried out using a heat curtain being generated by porous injection are presented.     

On choice of the blade back profile curvature in transonic turbine cascades

Some design and experimental data on three cascades with the same 12° bending angle for the primary nozzle block of a gas turbine are presented. As is seen from the investigation the most efficient at the transonic velocities of the outward flow are the blades, the back curvature of which in the bevel cut zone decreases to the trailing edge. Also presented is the fact that the blade with the increasing back curvature has noticeably larger losses.     

System sensitivity to parametric variations in the problem of lateral motion flight vehicle control

The results of investigation of dynamic system sensitivity to parametric variations in the channel of flight vehicle lateral motion are presented using the notion of infinitesimal transformation. The exact relationships establishing a link between the structure of parameter deviation and that of system phase coordinate deviation are obtained.     

Potential of salt-accumulating and salt-secreting halophytic plants for recycling sodium chloride in human urine in bioregenerative life support systems

This study addresses the possibility of growing different halophytic plants on mineralized human urine as a way to recycle NaCl from human wastes in a bioregenerative life support system (BLSS). Two halophytic plant species were studied: the salt-accumulating Salicornia europaea and the salt-secreting Limonium gmelinii. During the first two weeks, plants were grown on Knop’s solution, then an average daily amount of urine produced by one human, which had been preliminarily mineralized, was gradually added to the experimental solutions. Nutrient solutions simulating urine mineral composition were gradually added to control solutions. NaCl concentrations in the stock solutions added to the experimental and control solutions were 9 g/L in the first treatment and 20 g/L in the second treatment. The mineralized human urine showed some inhibitory effects on S. europaea and L. gmelinii. The biomass yield of experimental plants was lower than that of control ones. If calculated for the same time period (120 d) and area (1 m²), the amount of sodium chloride taken up by S. europaea plants would be 11.7 times larger than the amount taken up by L. gmelinii plants (486 g/m² vs. 41 g/m²). Thus, S. europaea is the better choice of halophyte for recycling sodium chloride from human wastes in BLSS.     

Seasonal and diurnal behavior of NO2 column density in Antarctica as observed by Mark IV,Brewer Ozone Spectrophotometer Number 153

The Meteorology Department of India has been measuring vertical column density of NO₂ at Maitri (70.7°S, 11.7°E), Antarctica since July 1999 using a Mark IV, Brewer Ozone Spectrophotometer. Maitri is situated at the south of the Antarctic circle. An analysis of 6 years of data shows that NO₂ column has seasonal variation with a maximum value during summer. It is also found that during the period when sun does not set, the NO₂ column exhibits a diurnal variation, with a peak around noon and lower values in the morning and afternoon hours. Using a simple steady-state chemical reaction scheme, an attempt has been made to explain these features.