Acceleration and particle transport in collisionless plasma in the process of dipolarization and nonstationary turbulence

This work is devoted to studying the processes of the acceleration of plasma particles in thin current sheets that appear during magnetospheric substorms in the Earth’s magnetosphere tail. A numerical model of magnetic dipolarization accompanied by plasma turbulence has been constructed and studied. The model allows one to investigate the particle acceleration due to the action of three principal mechanisms: (1) plasma turbulence; (2) magnetic dipolarization; (3) their simultaneous action. For the given velocity kappa-distributions, we obtained energy spectra of three types of accelerated particles, i.e., protons p⁺, ions of oxygen O⁺, and electrons e^–. It has been shown that the combined mechanism of dipolarization with turbulence (3) makes the largest contribution to the increase in the energy of protons and heavy ions as compared with a separate action of each of mechanisms (1) and (2); in this case, electrons accelerate less. The consideration of the joint action of acceleration mechanisms (1) and (2) can explain the apparition of particles with energies on the order of magnitude equal to hundreds keV in the Earth’s magnetosphere tail.     

Sporadic structures in equatorial ionosphere as revealed from GPS occultation data

A method for monitoring of sporadic formations in the lower ionosphere by use of the amplitude and phase variations of decimeter radio waves in the occultation trans-ionospheric link GPS satellite — LEO CHAMP satellite is described. Typical variations of the amplitude and phase of the occultation signal, caused by layered formations in the lower ionosphere, are considered. Parameters of sporadic structures measured during period of especially strong solar flashes from October 25 till November 9, 2003, are described. Results of statistical analysis of the occurrence frequency of sporadic layers, their altitude distribution, and thickness are presented. The electron density distribution in the lower ionosphere in the equatorial zone is estimated.     

Trajectory correction of the Spektr-R spacecraft motion

The results of refining the parameters of the Spektr-R spacecraft (RadioAstron project) motion after it was launched into the orbit of the Earth’s artificial satellite in July 2011 showed that, at the beginning of 2013, the condition of staying in the Earth’s shadow was violated. The duration of shading of the spacecraft exceeds the acceptable value (about 2 h). At the end of 2013 to the beginning of 2014, the ballistic lifetime of the spacecraft completed. Therefore, the question arose of how to correct the trajectory of the motion of the Spektr-R satellite using its onboard propulsion system. In this paper, the ballistic parameters that define the operation of onboard propulsion system when implementing the correction, and the ballistic characteristics of the orbital spacecraft motion before and after correction are presented.     

Verification of shielding effect by the water-filled materials for space radiation in the International Space Station using passive dosimeters

The dose reduction effects for space radiation by installation of water shielding material (“protective curtain”) of a stack board consisting of the hygienic wipes and towels have been experimentally evaluated in the International Space Station by using passive dosimeters. The averaged water thickness of the protective curtain was 6.3 g/cm². The passive dosimeters consisted of a combination of thermoluminescent detectors (TLDs) and plastic nuclear track detectors (PNTDs). Totally 12 passive dosimeter packages were installed in the Russian Service Module during late 2010. Half of the packages were located at the protective curtain surface and the other half were at the crew cabin wall behind or aside the protective curtain. The mean absorbed dose and dose equivalent rates are measured to be 327 μGy/day and 821 μSv/day for the unprotected packages and 224 μGy/day and 575 μSv/day for the protected packages, respectively. The observed dose reduction rate with protective curtain was found to be 37 ± 7% in dose equivalent, which was consistent with the calculation in the spherical water phantom by PHITS. The contributions due to low and high LET particles were found to be comparable in observed dose reduction rate. The protective curtain would be effective shielding material for not only trapped particles (several 10 MeV) but also for low energy galactic cosmic rays (several 100 MeV/n). The properly utilized protective curtain will effectively reduce the radiation dose for crew living in space station and prolong long-term mission in the future.     

A challenge to the highest balloon altitude

Development of a balloon to fly at higher altitudes is one of the most attractive challenges for scientific balloon technologies. After reaching the highest balloon altitude of 53.0 km using the 3.4 μm film in 2002, a thinner balloon film with a thickness of 2.8 μm was developed. A 5000 m³ balloon made with this film was launched successfully in 2004. However, three 60,000 m³ balloons with the same film launched in 2005, 2006, and 2007, failed during ascent. The mechanical properties of the 2.8 μm film were investigated intensively to look for degradation of the ultimate strength and its elongation as compared to the other thicker balloon films. The requirement of the balloon film was also studied using an empirical and a physical model assuming an axis-symmetrical balloon shape and the static pressure. It was found that the film was strong enough. A stress due to the dynamic pressure by the wind shear is considered as the possible reason for the unsuccessful flights. A 80,000 m³ balloon with cap films covering 9 m from the balloon top will be launch in 2011 to test the appropriateness of this reinforcement.     

Electric discharge in the Martian atmosphere,Paschen curves and implications for future missions

Electric discharge between two electrically charged surfaces occurs at a well-defined, gas-dependent combination of atmospheric pressure and the distance between those two surfaces, as described by Paschen’s law. The understanding of when the discharge will occur in the conditions present on Mars is essential for designing space-flight hardware that will operate on the Martian surface as well as understanding electrical discharge processes occurring in the Martian atmosphere. Here, we present experimentally measured Paschen curves for a gas mixture representative of the Martian atmosphere and compare our results to breakdown voltages of carbon dioxide, nitrogen, and helium as measured with our system and from the literature. We will discuss possible implications for instrument development as well as implications for processes in the Martian atmosphere. The DC voltage at which electric discharge occurred between two stainless steel spheres was measured at pressures from 10⁻² to 100 torr in all gases. We measured a minimum voltage for discharge in the Mars ambient atmosphere of 410 ± 10 V at 0.3 torr cm. As an application, the breakdown properties of space-qualified, electrical wires to be used in the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) were studied.     

Miniaturized laser-induced plasma spectrometry for planetary in situ analysis – The case for Jupiter’s moon Europa

Jupiter’s icy moon Europa is one of most promising places in our Solar System where possible extraterrestrial life forms could exist either in the past or even presently. The Europa Lander mission, an exciting part of the international Europa Jupiter System Mission (EJSM/Laplace), considers in situ planetary exploration of the moon. The distance of Europa from the Earth and the Sun asks for autonomous analytical tools that maximize the scientific return at minimal resources, demanding new experimental concepts. We propose a novel instrument, based on the atomic spectroscopy of laser generated plasmas for the elemental analysis of Europa’s surface materials as far as it is in reach of the lander for example by a robotic arm or a mole, or just onboard the lander. The technique of laser-induced plasma spectrometry provides quantitative elemental analysis of all major and many trace elements. It is a fast technique, i.e. an analysis can be performed in a few seconds, which can be applied to many different types of material such as ice, dust or rocks and it does not require any sample preparation. The sensitivity is in the range of tens of ppm and high lateral resolution, down to 50 μm, is feasible. In addition, it provides the potential of depth profiling, up to 2 mm in rock material and up to a few cm in more transparent icy matrices. Key components of the instrument are presently developed in Germany for planetary in situ missions. This development program is accompanied by an in-depth methodical investigation of this technique under planetary environmental conditions.     

GNSS radio tomography of the ionosphere: The problem with essentially incomplete data

We discuss the specific features of the spatiotemporal radio tomography of ionospheric electron density based on the data from high orbiting global navigational satellite system (GNSS). The main peculiarities are four-dimensionality of the problem and essential incompleteness of input data. The approach suggested for the solution of this problem is based on the search for the solution with minimal Sobolev’s norm (the most smooth solution), which provides, in particular, smooth extension of the solution to the area where no input data is available. Methods and algorithms for the solution of the problem are developed, and the resolution of the proposed technique is estimated. Examples of global and regional radio tomographic imaging based on GNSS data are presented. The obtained results are compared with the data of ionosondes and with the results of radio tomography based on the radio transmissions from low-orbiting satellites.