The Electron Beam Instrument (F6) on Freja

The Electron Beam Instrument (F6) onFreja is the first attempt to apply the electron drift technique in a region of large ambient magnetic fields. The paper describes the operational principles, the technical realization, and the difficulties encountered in the derivation of the electric fields.     

Stellar infrared astronomy with EDISON

In this review the IR emission from circumstellar material is discussed, both of ionized gas and dust grains, and the astrophysical information that can be extracted from such observations. Some emphasis is placed on the possibilities of stellar IR astronomy using a large space-borne telescope, especially with respect to the much better spatial and spectral resolution of such a telescope compared to the current generation of ground-based and space IR telescopes.     

Lower and upper limits to comet p/halley solid material loss rate

A radiative hydrodynamic model of comet P/Halley is used to investigate quantitatively the constraints imposed onto the Comet loss rate in solids by both the in-situ data and the remote sensing data. In particular, for the first time, the in-situ data are used to fit composite spectra extending from near-IR wavelengths to the microwave region. Also, for the first time the uncertainty affecting the ejection velocity of large grains is taken into account. The results suggest that only future rendez-vous studies of the grain density in the vicinity of a comet would be able to provide definitely reliable values of the comet loss rate.     

The INFRARED SPACE OBSERVATORY (ISO)

The INFRARED SPACE OBSERVATORY (ISO), a project of the European Space Agency (ESA), will make various astronomical observations in the wavelength range of 2 to 200 μm. Two-thirds of its observing time will be available to guest observers via the traditional route of proposal submission. ISO will be launched in 1995 by an Ariane 4 from Kourou (Guyana) and be brought into a very elongated orbit with a 24hr period of which 16 hr can be used for astronomical observations. The payload module is essentially a large cryostat with a tank that will be filled with over 2000 litres of superfluid helium to keep the instruments cold (2 to 4 K) during an expected lifetime of 18 months. Inside the dewar, there is a Ritchey-Chretien telescope with a primary mirror of diameter 60cm. Four instruments, each provided by a different PI consortium, share the ISO focal plane. These instruments are : a photometer, a camera and two spectrometers — one for the wavelength range 2–45 μm and the other for 45–180 μm.     

Paramecium--a model system for studying cellular graviperception.

Experiments under varied gravitational accelerations as well as in density-adjusted media showed that sensation of gravity in protists may be linked to the known principles of mechanosensation. Paramecium, a ciliate with clear graviresponses (gravitaxis and gravikinesis) is an ideal model system to prove this hypothesis since the ciliary activity and thus the swimming behaviour is controlled by the membrane potential. It has also been assumed that the cytoplasmic mass causes a distinct stimulation of the bipolarly distributed mechano-sensitive K+ and Ca2+ ion channels in the plasma membrane in dependence of the spatial orientation of the cell. In order to prove this hypothesis, different channel blockers are currently under investigation. Gadolinium did not inhibit gravitaxis in Paramecium, showing that it does not specifically block gravireceptors. Further studies concentrated on the question of whether second messengers are involved in the gravity signal transduction chain. Exposure to 5 g for up to 10 min led to a significant increase in cAMP.     

High Dynamic GPS Receiver Using Maximum Likelihood Estimationand Frequency Tracking

A new high dynamic global positioning system (GPS) receiver ispresented and its performance characterized by analysis,simulation, and demonstration. The demonstration receiver is abreadboard model capable of tracking a single simulated satellitesignal in pseudorange and range rate. Pseudorange and range rateestimates are made once every 20 ms, using a maximum likelihoodestimator, and are tracked by means of a third-order fadingmemory filter in a feedback configuration. The receiver trackspseudorange with rms errors of under 1 m when subjected tosimulated 50 g, 40 g/s circular trajectories. The tracking thresholdis approximately 28 dB·Hz, which provides 12 dB margin relativethe the minimum specified signal strength, assuming 3.5 dB systemnoise figure and 0 dB antenna gain.     

A bioreactor system for the nitrogen loop in a Controlled Ecological Life Support System.

As space missions become longer in duration, the need to recycle waste into useful compounds rises dramatically. This problem can be addressed by the development of Controlled Ecological Life Support Systems (CELSS) (i.e., Engineered Closed/Controlled Eco-Systems (ECCES)), consisting of human and plant modules. One of the waste streams leaving the human module is urine. In addition to the reclamation of water from urine, recovery of the nitrogen is important because it is an essential nutrient for the plant module. A 3-step biological process for the recycling of nitrogenous waste (urea) is proposed. A packed-bed bioreactor system for this purpose was modeled, and the issues of reaction step segregation, reactor type and volume, support particle size, and pressure drop were addressed. Based on minimization of volume, a bioreactor system consisting of a plug flow immobilized urease reactor, a completely mixed flow immobilized cell reactor to convert ammonia to nitrite, and a plug flow immobilized cell reactor to produce nitrate from nitrite is recommended. It is apparent that this 3-step bioprocess meets the requirements for space applications.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

New instrumentation for optical measuring of oxygen in gas or dissolved in liquids.

The optical oxygen sensor is a novel device for the determination of oxygen in gases or dissolved in liquids. It is based on the measurement principle of fluorescence quenching, which is completely different from that of polarographic oxygen sensors (today the most widespread devices of oxygen detection). The new instrument offers features and advantages, which render it not only a realistic alternative, but, for specific applications, make it superior to existing electrochemical methods. The system is based on low-cost semiconductor devices (light-emitting diodes, photodiodes, low-cost analogue and digital components) and new LED-compatible oxygen-sensitive membranes. The flow cell of the instrument may be thermostatted and the sensor can be calibrated by a simple two-point calibration procedure. The optical oxygen sensor is particularly suitable for measuring dissolved oxygen in respirometry, since no oxygen is consumed by the device and the signal is independent of sample flowrate or stirring speed. Typical fields of application are monitoring of oxygen in ground and drinking water, in process control in bioreactors and in breath gas and blood gas analysis.