Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

Analytical construction of interception trajectories in atmosphere

For an interception strategy of a removable target by a return space vehicle (RSV), we propose a structure of the control law by the aerodynamic efficiency that determines a chain of the three standard trajectories: nosing-up–free flight–nosing-down. A solution of the terminal problem is to determine numerical values of the control parameters that define moments to switch the RSV flight from one standard trajectory to another.     

Flow between finite and infinite disks with consideration of surface mobility

A problem of modeling the incompressible viscous flow between two disks taking into account the rotation of one of them is considered. We study the effect of the disk angular velocity (flow regimes) in the interdisk spacing, finiteness (infiniteness) of disk radiuses, calculation region configuration as well as distances between disks on the flow characteristics, particularly, on the resistance moment coefficient. Numerical simulation is performed with the aid of Maple and ANSYS Fluent software.     

Calculations of shock wave energy parameters in the presence of high-voltage electrical discharge in water for the transition region

A technique for calculating the energy parameters of shock waves at electrical discharge in water is presented for the transition region of discharge channel expansion using as the base the predetermined characteristics of discharge circuit. The technique is based on the solution of energy transport equation that is similar in form to that of radiative transfer. The validity of the presented approach was experimentally verified.     

Systems for the indication and display of secondary information in avionics and autobasing complexes

We consider the peculiarities of application for the cabin indicating systems of secondary information display, formulate and systematize the compositional and technical requirements for display systems and their elements. The tendencies and lines in the development of head-up displays for avionics and autobasing complexes were determined. The technique of calculating optics of such display systems with the use of electronic distortion compensation is presented.     

Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

Integrated acoustic monitoring system for jet fuel tanks

The paper describes a device and a technique of forming the information processing algorithms used in the integrated acoustic monitoring system for jet fuel tanks, intended for monitoring the level, density and mass of liquid products.     

Determination of characteristic frequencies of elastic oscillations of the <Emphasis Type="Italic">International Space Station</Emphasis> construction

The results of investigating free oscillations of the International Space Station construction appearing during spacecraft docking and undocking are described. The study is carried out using the measurement data of the low-frequency MAMS accelerometer. Several intervals of measurements performed in 2005 and 2006 were chosen to be studied. For chosen intervals, only the data intervals corresponding to the process of free attenuation of the oscillations construction elements were analyzed. Characteristic frequencies of elastic oscillations of the station construction and attenuation coefficients corresponding to them are found. The comparative analysis of the results obtained for various docking ports (nodes) is carried out. The described study is performed as a part of the technical experiment “The ISS Environment” carried out onboard the station in accordance with the Russian program of scientific and engineering experiments.     

Algebraic operations on graphs with using numeric coding for simulating the systems of rocket and space technology

The paper adduces the relators for algebraic operations on graphs using the numeric codes of the graphs. The special algebra of codes has been devised with consideration of the principles of graph transformation. This paper demonstrates the relevance of numeric coding of graphs for solving the problems of enumeration, systematization, and compact representation of the information about the structural and functional characteristics of the systems of flow distribution and conversion of rocket and space technology and for conducting the modeling transformations of given systems in the course of the structural and functional studies as well.