垂直返回重复使用运载火箭技术分析

结合SpaceX公司近期进行的多次猎鹰火箭一子级垂直着陆返回技术试验,对比分析垂直返回重复使用运载火箭两种返回方式的工程应用价值。首先,建立运载火箭一子级动力返回段弹道设计动力学模型。随后,提出基于H-V飞行剖面分段返回弹道设计方法。然后针对“返回原场”（RTLS）和“不返回原场”(NRTLS)两种垂直返回方式,构建综合考虑上升段与返回段的推进剂耦合作用的一体化弹道优化设计策略。最后,通过数值仿真,对比分析了两种返回方式下的火箭运载能力。结果表明,采用“不返回原场”方式的运载能力损失仅占“返回原场”方式的一半,具有较好的工程应用价值。     

微小卫星星间测距在轨零值标定方法及应用

针对双程伪码辅助载波测距系统零值高精度标定的需求,提出一种适用于微小卫星星间测距系统在轨零值自标定的方法。该方法将测距单板的发射信号转化为接收信号,采用原有的测距算法获取测距单板的自身零值。基于该方法研制了相应的零值标定装置,实现零值测量模式和星间距离测量模式的切换。并采用实验的方法,对比不同信号强度及温度情况下的标定效果。实际测试表明,该方法所测零值稳定、结果可靠性高,同时具有较好的误差补偿效果,可作为一种新的在轨零值标定方法,其零值标定结果的不确定度可达0.18mm(2σ)。     

一种无人机旋翼设计方法

为了提高多旋翼无人机的航时,本文提出了一种无人机旋翼设计方法.该方法根据给定的爬升速度、旋翼转速、拉力、旋翼直径、桨叶数、翼型,能够计算出最大力效旋翼的几何特性,包括弦长分布、桨叶角分布.利用该方法设计了某型无人机的旋翼,得到了桨叶角和弦长沿径向的分布.制作了旋翼模型,并且开展了旋翼台架试验.在不同转速下,测量出拉力、...     

民用飞机预研论证权威真相源构建技术

权威真相源不仅是基于模型的系统工程实施的核心要素,也是"数字工程战略"的关键环节。对权威真相源构建技术进行了研究,包括对权威真相源进行了定义和分析,设计了权威真相源的构建目标和原则,构建了权威真相源的架构和业务流程,并对构建权威真相源的支持技术进行了研究。梳理了民用飞机预研论证的业务流程、专业模型和基础模型,最后通过民用飞机预研论证验证机的案例研究,证实了权威真相源构建技术的可行性。民用飞机预研论证权威真相源能够有效提升系统工程的组织性,提升协同设计效率,同时能够提高模型和系统设计的重用性,减少系统工程实施的复杂度,缩小开发成本。     

Research on failure criterion of composite based on unified macro- and micro-mechanical model

A new unified macro- and micro-mechanics failure analysis method for composite structures was developed in order to take the effects of composite micro structure into consideration. In this method, the macro stress distribution of composite structure was calculated by commercial finite element analysis software. According to the macro stress distribution, the damage point was searched and the micro-stress distribution was calculated by reformulated finite-volume direct averaging micromechanics (FVDAM), which was a multi-scale finite element method for composite. The micro structure failure modes were estimated with the failure strength of constituents. A unidirectional composite plate with a circular hole in the center under two kinds of loads was analyzed with the traditional macro-mechanical failure analysis method and the unified macro- and micro-mechanics failure analysis method. The results obtained by the two methods are consistent, which show this new method’s accuracy and efficiency.     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

初级教练机综合航电系统发展趋势

分析和总结了综合航空电子系统的发展历史和现状,以及我国航电技术水平发展状态,阐述了当前初级教练机航电系统存在的问题。对国外军用初I中级教练机、国外民用轻型飞机和国产初级教练机现状进行了分析,论述了初级教练机综合航空电子系统的发展趋势。     

新型聚苯并噁嗪改性树脂的制备与性能

通过预聚反应制备了一种新型聚苯并噁嗪改性树脂.利用FTIR、GPC表征了改性树脂.利用旋转黏度计、DSC、DMA和TGA分别考察了树脂的流动性能、固化行为和改性树脂固化物的热性能.结果表明:制备的苯并噁嗪改性树脂在60～ 100℃,黏度小于500 mPa·s,恒温6h黏度不明显增大,具有良好的流动性能,适用于RTM成型工艺.改性树脂聚合温度较低,具有良好的固化工艺性.改性树脂固化物在氮气气氛下Td5在430℃以上,在900℃的残重高达73.71％,Ts为353.4℃,具有良好热性能.     

Prediction of transient responses of a folding wing during the morphing process

Accurate prediction of the structural dynamic characteristics of a folding wing during the morphing process is a prerequisite for performing transient aeroelastic analysis. In view of this fact, this paper develops a set of differential-algebraic equations that govern the time evolution of the folding wing during the morphing process by using the floating frame approach. Using the established equations of motion, the transient responses of the wing during the morphing process are computed. The developed equations can be further integrated with the CFD codes to carry out the transient aeroelastic analysis of the morphing wing.     

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.