Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.     

旋转爆震发动机爆震波建立过程实验研究

为了深入研究旋转爆震发动机爆震波建立过程及形成机理,采用小能量火花单次点火的方式进行了一系列旋转爆震发动机起爆实验。发动机采用环缝-喷孔对撞式掺混方式,燃料为H2,氧化剂为空气,实验成功起爆旋转爆震波,并连续旋转稳定传播,爆震波传播频率为5.09~6.45k Hz,传播速度为1286~1644.8m/s。在发动机稳定工作过程中,集气腔与燃烧室相互影响,二者处于平稳的动态平衡。其次,通过对旋转爆震波起爆过程详细分析发现,点火形成的初始火焰在环形燃烧室经历一个类似DDT的火焰发展过程,成功转变为爆震波,且从点火到爆震波建立之间的火焰发展传播过程和时间间隔均表现出很强的随机性。此外,为验证小能量火花点火的可靠性,还进行了小能量点火重复性实验,发现在稳定工况条件下采用小能量点火成功率最高可达100%,各组旋转爆震波传播速度在1440m/s附近波动。     

引入压力梯度的针对角区分离流动的Spalart-Allmaras模型的改进

针对Spalart-Allmaras（S-A）模型在角区分离计算中的问题,将无量纲的压力梯度引入其涡黏性输运方程的生成项,得到了改进的S-A模型.通过对两套含角区分离的低速压气机叶栅进行验证计算发现:与实验结果相比,原始S-A模型所得的分离区偏大,分离区内壁面压力偏低;而改进模型得到了与实验一致的分离区尺寸以及吸力面、压力面压力系数分布等结果.针对S-A模型涡黏性生成项和耗散项的分析表明:引入的无量纲压力梯度有效的识别了角区分离,在分离区内改变了涡黏性的生成、耗散关系,增大了涡黏性,从而缩小了计算所得分离区,同时在主流区保留了原始S-A模型的计算结果,进而带来了良好的改进效果.      

基于自然激励技术的颤振边界预测

为了预测紊流激励条件下机翼的颤振边界,基于自然激励技术提取紊流响应的自由衰减信号,采用矩阵束方法识别模态参数,最后通过Z-W(Zimmerman-Weissenburger)方法计算稳定性判据,拟合判据变化曲线并外推颤振边界.对平板机翼模型进行了数值仿真分析,对单独机翼模型风洞颤振试验数据进行了计算.结果表明:采用自然激励技术与矩阵束方法能够较准确地识别紊流激励响应的模态参数,频率识别误差小于6％,阻尼比识别误差小于30％,结合Z-W方法能够在较低风速较早地预测颤振边界,有助于提高试验的安全性.     

民用飞机试飞阶段人为因素适航审定技术研究

随着飞机各系统可靠性的不断提高,人为失误逐渐成为系统失效或造成飞行事故的主要因素,已成为设计及适航审定部门关注的重难点问题.当前国内外对于如何验证人为因素是否满足相关适航条款的要求仍处于理论探索阶段.针对上述问题,基于CCAR-25部条款分析试飞阶段民用飞机人为因素适航审定过程,包括基于SHELL模型及T.E.S.T矩阵的人为因素审定条款筛选,基于MOC5&MOC6的试验机符合性验证方法,并基于模糊评判方法给出数据分析实例.本文提出的人为因素适航审定思路及验证方法具有一定创新性,已在试飞阶段ARJ21-700飞机上初步应用,可为后续C919等民用飞机人为因素设计和适航审定提供技术支持和方法保证.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

高温长期时效对一种镍基单晶合金拉伸和持久性能的影响

研究了高温长期时效对一种镍基单晶合金在室温条件下瞬时拉伸强度和在950℃/240MPa条件下持久性能的影响。结果表明:1000℃短期时效100h,合金室温拉伸强度σb与屈服强度σ0.2与时效前相比没有明显变化,时效超过500h后σb和σ0.2开始显著下降,时效超过1000h后,σb和σ0.2随时效时间延长下降幅度减小;短期时效100h和500h样品在950℃/240MPa条件下的持久寿命大幅度降低,延伸率快速上升,时效时间超过1000h后,持久寿命的下降幅度减小,合金的持久寿命与延伸率均趋于稳定。长期时效后γ'相形貌改变及γ/γ'相界面高密度位错网的破坏是时效后合金室温及高温持久性能持续降低的主要原因。     

柔性热膜剪应力传感器水下测量温度修正

柔性热膜微传感器应用于流体壁面剪应力测量时,流体温度对传感器输出有很大影响,因此有必要对工作在非标定温度下的传感器输出信号进行修正补偿。重点研究了水下测量时传感器输出与水温的关系以及温度修正方法。通过分析传感器过热比和流体物理性质与温度的相关性,建立了流体温度与传感器过热比和标定系数的函数关系。在此基础上,提出了一种用于水下剪应力测量的温度修正方法,可以有效减小水温对传感器输出的影响。经实验验证,该方法可以使工作在25℃、28℃水温环境下的传感器输出值与其20℃标定值的相对误差从23．7％和37．1％回落到0．82％和0．83％。     

复合材料夹层结构在航空领域的应用

详细描述了复合材料夹层结构及几种常用芯材的性能特点,综合分析了复合材料夹层结构在飞机上的应用案例,对各种夹层结构芯材成型工艺的重点、难点进行了探析,得到了复合材料夹层结构的性能概况及使用工艺要求,可为复合材料夹层结构设计、制造提供参考。