空间色噪声下信号频域检测方法性能分析

水下小孔径阵列的应用环境是色噪声环境,针对超增益波束形成方法在色噪声环境下噪声协方差矩阵估计偏差使阵列空间增益不能达到最大的问题,提出了一种频域超增益波束形成方法(FSD, Super-Directive beamforming in Frequency domain),该方法将宽带接收数据分成多个子带,在每个子带内分别估计噪声协方差矩阵,降低了噪声协方差矩阵的估计偏差,并使用估计得到的噪声协方差矩阵对接收数据解相关.最后使用空间谱检测器检测微弱目标信号.实测噪声数据的仿真结果表明,空间有色噪声环境中FSD方法的检测性能优于传统的时域超增益波束形成方法(TSD, Super-Directive beamforming in Time domain)2 dB,优于频域最小方差无畸变响应(FMVDR, Minimum Variance Distortionless Response in Frequency domain)波束形成方法2 dB.     

时域有限差分法连接边界电磁泄漏

用时域有限差分法计算目标的雷达散射截面时,一般用连接边界来引入平面入射波.理想情况下,当总场区没有散射目标时,该区域仅有入射波,散射场区电磁波为0.但在实际计算过程中,散射场区的电磁波一般不会严格等于0,这是因为在连接边界引入入射波时产生了电磁泄漏.一维情形下,用散射场区电场的平方和来衡量电磁泄漏程度.二维情形下,用等效原理将散射场区的电磁场进行远场外推,得到雷达散射截面,以此衡量电磁泄漏的大小.研究表明:时间步长、入射角度都能影响电磁泄漏大小.为使电磁泄漏较小,时间步长应接近于稳定性要求的最小步长,入射方向应避免垂直于计算区域边界.     

基于性能可靠性约束的智能液压泵节能优化

考虑飞机飞行剖面的多变性,针对智能液压泵变压力变流量的特点,提出一种多模性能可靠性分析方法.推导2类工作模式的传递函数模型,分析智能泵性能的主要影响因素,基于累积损伤理论构建多阶段任务可靠性模型.以系统工作效率为目标函数,性能可靠性指标为约束条件,对智能泵作优化设计.最后用优化所得参数求系统在各阶段的性能可靠度,并与机载液压系统常用的恒压泵作节能对比.结果表明:提出的基于节能的智能泵性能可靠性分析方法符合系统实际工况要求,相比传统恒压泵系统,智能泵系统的平均效率可提高15.8%.     

基于物理光学假设的导体表面电流密度误差分析

用物理光学法计算理想导体雷达散射截面过程中,需要基于无限大切平面假设计算表面电流密度.只有对表面比较光滑的电大尺寸目标,该假设才近似满足,而在一般情况下由该方法求得的表面电流密度存在误差.将二维导体圆柱、方柱以及三角柱等构型在不同入射频率、极化下的物理光学表面电流密度与精确解或矩量法结果进行了对比.分析表明:横磁波照射时物理光学法除在顶点处有较大误差外,基本能够正确反映出表面电流密度分布情况.横电波情形下物理光学法难以如实反映照射面和阴影面电流的谐振变化,与入射方向平行的面上表面电流密度也有较大误差.     

基于空域划分的超视距空战态势威胁评估

编队超视距空战(BVR,Beyond Visual Range)已成为现代空战的主要模式.在空战优势区域与劣势区域判断的基础上对整个空域进行划分,并给出4种特定空域态势.从空中态势和编队作战能力两方面对空战态势进行分析.使用主成分分析法选取输入变量分析编队作战能力,降低评估过程中收集数据的复杂度.应用遗传神经网络对影响BVR各因素进行效能评估,将遗传算法(GA,Genetic Algorithms)与多层前馈(BP,Back Propagation)网络结合,利用GA的全局搜索优化BP网络的结构参数,有效克服BP算法的局部收敛等问题.结果表明:该模型能在综合分析空战各指标后给出红蓝双发的态势评估指标,该模型可有效减少评估中的人为因素,使评估结果更为客观可信.     

Finite element reconstruction approach for on-orbit spacecraft breakup dynamics simulation and fragment analysis

Breakup model is the key area of space debris environment modeling. NASA standard breakup model is currently the most widely used for general-purpose. It is a statistical model found based on space surveillance data and a few ground-based test data. NASA model takes the mass, impact velocity magnitude for input and provides the fragment size, area-to-mass ratio, velocity magnitude distributions for output. A more precise approach for spacecraft disintegration fragment analysis is presented in this paper. This approach is based on hypervelocity impact dynamics and takes the shape, material, internal structure and impact location etc. of spacecraft and impactor, which might greatly affect the fragment distribution, into consideration. The approach is a combination of finite element and particle methods, entitled finite element reconstruction (FER). By reconstructing elements from the particle debris cloud, reliable individual fragments are identified. Fragment distribution is generated with undirected graph conversion and connected component analysis. Ground-based test from literature is introduced for verification. In the simulation satellite targets and impactors are modeled in detail including the shape, material, internal structure and so on. FER output includes the total number of fragments and the mass, size and velocity vector of each fragment. The reported fragment distribution of FER shows good agreement with the test, and has good accuracy for small fragments.     

Quality variation of GPS satellite clocks on-orbit using IGS clock products

Over 60% clocks on board of the GPS satellites are working longer than their designed life. Therefore realizing their stabilities in a long time scales is essential to GPS navigation and positioning plus IGS time scale maintaining. IGS clock products from 2001 to 2010 are used to analyze the GPS satellite clock qualities such as frequency stabilities and clock noise level. We find out that for the clocks of Block IIA satellites the frequency stabilities and clock noise are 10 times worse than that of the Block IIR and IIR-M satellites. Moreover, the linear relationships between frequency stabilities and clock residuals have been deduced with an accuracy of better than 0.02 ns. Specially, it is noticed that the clock of the PRN27 is instable and the relationship between the frequency stability and residuals is at least a quadratic curve. Therefore, we suggested that GPS satellite clocks should be weighted by their quality levels in application, and the observations of the Block IIA should not be used for real-time positioning which required precision better than one meter.     

并行加工系统一类排序问题的最优解

讨论了将多个零件分派给并行加工系统加工的排序问题.假设同一零件分配给不同的设备,其加工时间不同,分析了使所有零件的总花费时间(加工时间与等待时间之和)最小的排序方法.首先建立了该类问题的数学模型,然后将其转化为指派问题,通过匈牙利算法可以得到最优解.所得算法的时间复杂性是多项式界的.最后给出了一个数值例子说明求解过程.     

CDAS 自动化监控管理系统

指令与数据获取站监控管理系统吸取了国内外先进的集散控制系统的优点,综合运用了现代计算机管理先进技术。文章介绍了该监控管理系统的方案、系统功能模块、系统结构和应用软件的设计,实现了系统管理的高效自动化,确保系统运行的可靠、安全。     

梁式构件动力学响应分析的集总参数方法

详尽阐述了一种适用于梁式构件动力学响应分析的集总参数方法——有限段方法。采用有限段方法建立柔性梁式构件的离散模型,基于Ｋａｎｅ方程的Ｈｕｓｔｏｎ方法建立柔性多体系统动力学方程。该方程计入了梁式构件的几何非线性变形的惯性影响,在求解过程中,引入了相对位移的模态变换以提高计算效率。通过典型实验验证了有限段方法可以解决具有几何非线性变形的柔性梁式构件的多体系统动力学问题。