基于功势的燃气轮机燃气马力效率研究

基于燃气马力的物理内涵,推导出了燃气轮机各部件的燃气马力效率的表达式。根据各种效率具有“同时归一”的特性,从理论分析和数值计算上进行了验证。分析了各种参数对燃气马力效率的影响。结果表明：燃气马力效率不仅和部件效率有紧密的自然关系,还和其他热力参数(例如压比)有内在的逻辑关联。并从燃料燃烧的燃气马力效率的角度优化了压气机压比。     

Monocular Vision-based Two-stage Iterative Algorithm for Relative Position and Attitude Estimation of Docking Spacecraft

Visual sensors are used to measure the relative state of the chaser spacecraft to the target spacecraft during close range rendezvous phases. This article proposes a two-stage iterative algorithm based on an inverse projection ray approach to address the relative position and attitude estimation by using feature points and monocular vision. It consists of two stages: absolute orientation and depth recovery. In the first stage, Umeyama's algorithm is used to fit the three-dimensional (3D) model set and estimate the 3D point set while in the second stage, the depths of the observed feature points are estimated. This procedure is repeated until the result converges. Moreover, the effectiveness and convergence of the proposed algorithm are verified through theoretical analysis and mathematical simulation.     

CO_2激光烧蚀水所形成气蚀空穴机理研究

分析了激光烧蚀液体时形成表面空穴的机理。利用高速相机获得CO2激光烧蚀蒸馏水的流场照片,对空穴的发展过程进行了分析,发现空穴的快速发展期在最初的100μs内,之后在几百μs内保持平衡。用简单模型计算了不同能流密度下,空穴平衡时的形状,并分析了模型的局限性。研究结果对于揭示激光烧蚀水产生推力的机理有重要意义,有利于促进水工质激光推进的发展。     

Fourier methods for turbomachinery applications

Rapid increase in computing power has made a huge difference in scales and complexities of the problems in turbomachinery that we can tackle by use of computational fluid dynamics (CFD). It is recognised, however, that there is always a need for developing efficient methods for applications to blade designs. In a design cycle, a large number of flow solutions are sought to interact iteratively or concurrently with various options, opportunities and constraints from other disciplines. This basic requirement for fast prediction methods in a multi-disciplinary design environment remains unchanged, regardless of computer speed. And it must be recognised that the multi-disciplinary nature of blading design increasingly influences outcomes of advanced gas turbine and aeroengine developments. Recently there has been considerable progress in the Fourier harmonic modelling method development for turbomachinery applications. The main driver is to develop efficient and accurate computational methodologies and working methods for prediction and analysis of unsteady effects on aerothermal performance (loading and efficiency) and aeroelasticity (blade vibration due to flutter and forced response) in turbomachinery. In this article, the developments and applications of this type of methods in the past 20 years or so are reviewed. The basic modelling assumptions and various forms of implementations for the temporal Fourier modelling approach are presented and discussed. Computational examples for realistic turbomachinery configurations/flow conditions are given to illustrate the validity and effectiveness of the approach. Although the major development has been in the temporal Fourier harmonic modelling, some recent progress in use of the spatial Fourier modelling is also described with demonstration examples.     

直接再入大气的月球返回轨道设计研究

直接再入大气的月球返回轨道是月球采样返回任务普遍采用的飞行方案。文章将月-地转移轨道设计与再入大气仿真相结合,通过两级修正策略和落点匹配使月球返回轨道既满足再入界面约束又满足再入点地理位置约束。两条分别采用弹道式和弹道-升力式再入的月球返回轨道的计算结果表明,此方法是有效的。     

引入材料参数的弯管中性层偏移解析模型

中性层偏移是表征管材弯曲内外侧不均匀变形程度的关键参数。基于弯管截面力矩平衡条件,建立了引入材料参数的管材弯曲变形中性层偏移解析模型,针对管材数控绕弯和压弯过程对所建模型从多个方面进行了评估,研究了不同几何和材料等管材本征参数下的管材弯曲中性层偏移规律。结果表明:应用于TA18钛管数控绕弯,发现所建解析模型与已有解析方法预测精度相当,但能考虑材料参数影响,且相较于有限元模拟,本文解析模型更接近实验结果;应用于A6063铝合金管和AZ31镁合金管压弯过程,并与Hasegawa解析方法相较,发现本文解析模型能够准确预测拉压不对称对压弯中性层偏移的影响;弯曲半径减小,弯管直径增大,中性层向弯曲内侧移动;拉压屈服强度比减小,厚向异性指数增大,中性层向弯曲内侧移动。     

Flight Record of the Long March Series of Launch Vehicles

(Continued)THE 67TH LAUNCHOn May 15, 2002, a LM-4B launch vehicle lifted off with FY-1D meteorological satellite and HY-1A oceanic satellite from Tai-yuan Satellite Launch Center and laun     

振动时效在消除铸铝合金框架变形中的应用

铸铝合金异型件在加工过程中的变形问题广泛存在,而残余应力是引起变形的关键因素。本文从框架类产品的设计结构入手,分析残余应力与产品变形间的关系,结合振动时效工艺机理,重点详述了利用振动时效消除铸铝合金框架类产品变形工艺。试验表明,振动时效可显著消除铸铝合金框架件变形。     

压气机线性振荡叶栅气弹试验研究（二）：叶尖间隙的影响

 为了加强对叶轮机三维气动弹性机理的理解,为数值模拟方法提供试验验证数据,开展了压气机线性叶栅气动弹性试验研究。本研究分为2个部分,第1部分研究压气机线性振荡叶栅的气弹稳定性,本文为第2部分,重点辨别叶尖间隙对压气机叶片气弹稳定性的影响。试验结果表明随着叶尖间隙的增加,间隙流对振动叶片有失稳影响,其影响范围几乎遍及整个叶高,这与非定常气动的瞬时径向相互作用的结论是一致的。这种失稳效应与叶片间相位角对叶栅气弹稳定性的影响不耦合。间隙流在叶栅稳定性最差时影响最显著。详细的非定常压力试验结果表明,随着叶尖间隙的增加,叶片表面非定常压力幅值减小区域与间隙流造成的卸载区域相对应。由试验结果可以推断,不考虑叶尖间隙的数值模型可能会给出过稳定的叶片颤振预测。     

结构光三维视觉检测中光条图像处理方法研究

在结构光视觉检测系统中,光条中心的提取精度直接影响到整个测量系统的测量精度.光条图像的处理是其中重要的一步,尤其是受到严重噪声干扰的图像.探讨了被多种噪声干扰的光条图像的处理和精确提取光条中心的方法.给出了一种消除环境干扰的滤波模板并实验验证了其滤波效果.使用这些光条图像处理方法使整个测量系统在200mm×200mm的测量范围内测量精度达到0.083mm.