无人直升机的动态逆模糊集成控制

对于一个非线性系统,利用其近似的线性化模型求出系统的近似逆,采用模糊控制方法抑制误差对系统输出的影响来保证系统的最终特性,构成一种动态逆模糊集成控制方案.将这一方法应用在无人直升机的姿态控制中,仿真结果表明该方法可以消除无人机未建模动态和不确定性的影响,具有较好的鲁棒性能.      

Reconstruction of space weather physical parameters on 400-year scale

The main goal of this paper is to get physically informative comprehensive data about dynamics of the solar magnetic field, geomagnetic field, and interplanetary magnetic field over large time scales. The total sunspot magnetic flux, aa and IDV indices of geomagnetic activity, the IMF strength, the dipole-octopole index of the large-scale magnetic field of the Sun, and the open magnetic flux are reconstructed for 400 years. The reconstruction of the π index of the large-scale polar magnetic field of the Sun is performed for 150 years.     

N2O单组元微推力器性能分析及试验

N₂O单组元微推进是当前微推进领域的一个热点问题.在N₂O催化分解热力计算的基础上开展了对N₂O单组元微推力器比冲性能影响因素的分析,分析结果表明微推力器比冲与N₂O分解效率及喷管扩张比有密切关系.所开展的亚牛级N₂O单元微推力器催化分解试验结果表明所设计N₂O单元推力器能在250℃初温条件下启动,初步验证了N₂O单元微推力器的可行性;也揭示了推力室结构及床载大小对亚牛级N₂O单元微推力器性能的影响,为进一步的结构及试验设计提供了参考.     

有分布质量系绳的卫星系统的动力学

以一组偏微分方程建立起的数学模型和采用距离速率控制算法来描述系统的受控运动。创建的递推算法用于计算系统的定常运动和称驻形。根据求解小偏差运动方程和通过边界条件求解特征根以判定驻形的稳定性。给出了模拟结果。     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。     

考虑陀螺效应的转子动力学相似准则

针对考虑陀螺力矩的转子系统缩尺相似模型与原型是否满足动力学相似的问题,采用量纲分析法推导了考虑陀螺力矩的转子-简单支撑系统相似准则,得到了模型与原型各物理量相似比.通过求解不同相似比下Jeffcott转子系统临界转速的解析解,和利用有限元软件ANSYS对某转子系统临界转速和振型相似性进行了数值模拟,验证了所推导的考虑陀螺力矩转子系统相似准则的正确性.研究表明:考虑陀螺力矩、简单支撑和Rayleigh比例阻尼的转子系统,在相似转速下缩尺模型与原型的固有频率具有相似性,并且临界转速相似.