石墨渗铜喉衬材料的微观结构与抗热震性能

采用粗粒级高强石墨加压渗铜工艺，制备了石墨渗铜(CIG：copper-impregnated graphite)喉衬材料。对其微观结构与抗热震性能的关系进行了研究。结果表明，由于渗铜提高了原石墨的热导率及整体增韧的综合效果，使石墨渗铜材料比通用的5种石墨材料具有更好的抗热震性能，更好地适应了小型高性能战术导弹、航天飞行器高压强大流量SRM对喉衬材料的要求。     

液相先驱体转化法制备ZrC粉末及合成机理

以氯氧化锆、丙醇、丙三醇和乙酰丙酮等为基本原料合成了锆的有机先驱体溶液,采用液相先驱体转化法在1 500℃制备了ZrC粉末。运用FTIR对锆的先驱体溶液的组成、结构以及形成机理进行了分析,用XRD和EDS分析了粉末的形成机理,用SEM观察了粉末的形貌。结果表明,有机锆的先驱体溶液具有螯和的链状或网状结构;先驱体溶液干燥后的粉末呈蜂窝状结构,在不同热处理温度下获得面心立方的ZrC粉末。经过热力学计算结果表明,C还原锆的氧化物开始生成ZrC的最低温度为1594℃,实验温度低于理论温度,在1500℃时获得面心立方的ZrC材料。     

复合材料格栅圆柱结构优化设计

复合材料格栅圆柱结构是由连续纤维缠绕的斜向和环向肋组成的结构.介绍了一种轴压作用下复合材料格栅圆柱结构的设计方法,该模型是在满足格栅结构整体屈曲要求、斜向肋承受压缩强度要求以及2个交叉点间肋段的局部屈曲3个约束条件的情况下,通过引入格栅结构整体屈曲、局部屈曲及压缩强度安全系数,并经过对数学模型的变换处理,使得格栅结构的结构重量最小,得到格栅结构的设计参数.该方法在格栅结构的设计与优化中非常有效.     

带三棱锥体群通道流动和传热特性的数值模拟

对带有三棱锥体群的涡轮叶片内部冷却通道进行了数值模拟,对比了三棱锥体群在迎风和背风状态、顺排和交错排列以及不同横向列数、不同流向间距时冷却通道内部的流动和传热特性。结果表明:三棱锥体群所产生的纵向涡能够兼顾压损的降低与传热效果的改善;背风顺排状态放置的三棱锥体群具有最高的综合传热效率,较其他放置方案高出20%~30%;在背风顺排时,较优横向列数为5,流向间距比为4~6。     

Study of thermo-fluidic characteristics for geometric-anisotropy Kagome truss-cored lattice

The aim of this paper is to provide a comprehensive comparison of the thermal insulation and heat transfer performance for Kagome truss-cored lattice along two perpendicular orientations OA and OB. Three test conditions are conducted under forced air convection for the titanium sandwich panel fabricated by 3 D printing technology. The thermo-fluidic characteristics are further explored by numerical simulation to reveal the underlying mechanisms of heat transfer enhancement.The results indicate that the orientation OB exhibits better thermal insulation than orientation OA under the identical temperature loading, while the latter outperforms the former by up to 20% higher overall heat transfer performance. In particular, the endwalls and lattice core in orientation OA achieve 9.7% and 22.5% higher area-averaged Nusselt number respectively than that in orientation OB for a given Reynolds number. The heat transfer superiority of orientation OA comes from the unique topology which induces the large scale spiral primary flows, facilitating the heat exchange between the cooling air and the surfaces of sandwich panel. However, the complex flow mixing leads to a maximum of 20% higher friction factor in orientation OA than that in orientation OB.     

轴流压气机试验若干异常气动现象表征与机理分析

在梳理某压气机试验器开展的历次压气机性能试验结果基础上,分析了试验系统发生的若干典型异常气动物理现象,通过试验数据表征分析与抑制方法试验验证,初步揭示了压气机试验异常气动现象的形成机制.研究结果表明:进口局部导叶角度失调会对下游流场产生扰动,导致压气机性能与稳定性出现恶化;转子顶部容腔通道逆流是导致压气机转子前外壁静压测量值偏高的原因,通过抑制容腔逆流可以改善压气机气动性能;改变进口节流比观察换算流量是否发生变化,是判定压气机试验进气系统漏气问题的有效方法.研究结果对于指导压气机性能试验故障诊断和提高试验分析能力具有重要作用.      

固体火箭发动机内绝热层烧蚀质量损失计算

运用较完备的烧蚀模型，采用了动边界显式差分格式，对固体火箭发动机内绝热层的烧蚀及其温度场进行了耦合计算。计算得到烧蚀率、炭化率、烧蚀厚度和炭化厚度，以及根据绝热层的工作时间计算出内绝热层的质量损失及发动机工作完成后一段时间内后效炭化质量损失。采用该方法不仅能使内绝热层设计更为合理，而且为后效推力的研究打下了基础。     

非线性比例导引系统研究

研究了非线性比例导引系统的性能。利用一种单输入双输出二阶非线性状态估计器估计弹目视线角速度和角加速度，状态估计器的输入直接采用来自导引头的信息，其输出量可以给出弹目视线角速度和角加速度的估计值，将此估计量作为补偿信号引入到比例导引系统中，形成了非线性比例导引系统。仿真研究表明，这种非线性比例导引具有良好的制导特性。     

GAP/AN推进剂的热分解催化研究

研究了ＧＡＰ／ＡＮ推进剂的燃速与硝酸铵放热分解峰温之间的相关性，硝酸铵的放热分解峰温越低，推进剂的燃速越高。用热分析方法筛选出了ＧＡＰ／ＡＮ推进剂有效的燃速调节剂ＭＯ，它能促进硝酸铵分解过程中质子转移反应，因而使ＧＡＰ／ＡＮ推进剂燃速提高。     

CBERS-02 Application Assessment

As the successor of CBERS-01, CBERS-02 was launched successfully on 21October 2003 and transmitted its first downlink data the next day. According to the OBT (On Board Test) outline, CRESDA cooperated with CAST and many remote sensing organizations in China in implementing the test of the satellite payloads, ground processing system and data application. In this paper, the test is briefly illustrated in three parts: Ⅰ. Satellite Parameters Test (especially the test for payloads), Ⅱ. Payload Image Quality Assessment, and Ⅲ. Data Application Assessment. The results of the test show that the image quality of CBERS-02 is much improved over CBERS-01 and will continue to play a more important role in the society and economic development of China.