化学气相反应法在C/C复合材料抗氧化处理中的应用

通过把硅蒸气渗入预制体孔隙与碳直接反应生成SiC的化学气相反应(CVR)方法,提高初始密度和预制体结构均不同的C／C复合材料的抗氧化能力,研究了C／C复合材料的密度变化与微观结构,并对其进行了氧化试验。结果表明,因CVR温度、C／C复合材料初始密度不同,抗氧化处理后的密度增加量有显著不同。针刺炭布C／C／SiC复合材料在马福炉中于1160℃经65min氧化后,其失重率仅2．6％,而密度为1．95g／cm^3的同结构C／C复合材料相在同条件下失重率高达32％。     

"爱国者PAC-3"型导弹主发动机装药药型反设计

对“爱国者PAC-3”型低空拦截导弹主发动机的装药药型进行了反设计,分析计算了开槽管形装药药型的优点。比较3种典型的开槽管形药型的压强-时间曲线,发现采用5槽大槽深非通透药型具有较好的综合性能,证明了“爱国者PAC-3”主发动机采用这一药型的原因所在。     

导航星座的自主导航技术--卫星自主时间同步

基于星载原子时钟频率稳定性的Allan方差表达,建立系统状态方程,并以星间双向测量伪距差作为基本观测量,组成系统测量方程,从而可以设计适用于导航星座卫星时间同步的Kalman滤波算法。系统仿真结果表明：通过对星间双向测量数据的滤波处理,能够实现星座卫星时间精密同步。     

多等级区域侦察弹性星座设计方法

针对传统侦察星座目标单一、弹性低的问题，提出了多等级区域侦察弹性星座的设计方法。该方法将星座设计过程按区域等级信息分为多个子星座逐步设计，直到整体星座对所有的区域性能满足设计要求。以区域被划分为3个等级为例，首先对星座设计需求、设计指标及设计步骤进行了分析。其次推导了地面最低分辨率和轨道高度的关系并确定了不同子星座的轨道高度。最后考虑轨道倾角、一箭多星发射、光照和升交点漂移同步约束，构建基础星座、子星座1和子星座2的优化模型。最终设计星座为3层混合星座，共8个轨道面和70颗卫星，星座对各等级区域的最大重访时间分别为10937s，12241s和17437s，弹性指数为2213%，2420%和6361%。结果表明该方法设计的星座可实现对区域覆盖和弹性分级的设计要求，证明了方法的有效性。对比Walker星座设计方法，在同等设计要求下，Walker星座所需卫星数为156颗，多等级区域侦察弹性星座所需卫星数远低于Walker星座，结果进一步证明了该星座设计方法的优越性。     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.     

倾转旋翼机巡航状态旋翼滑流影响

倾转旋翼机由于需要兼顾垂直起降和高速平飞2种典型工况下的动力需求，采用大直径旋翼作为推进装置会使机翼大部分处于旋翼滑流区内，这与常规螺旋桨飞机存在较大差异。为评估不同数值计算方法并研究旋翼滑流对倾转旋翼机气动特性的影响，针对选取两叶旋翼的某倾转旋翼机方案，利用激励盘模型、多参考系（MRF）模型、滑移网格模型分别进行了巡航状态下旋翼滑流对全机气动特性影响的数值模拟研究。结果表明:相对于无滑流状态，滑流定常影响使全机阻力增大，最大升阻比降低了7.5%，尾翼产生的升力增大，纵向静稳定度增加了17.1%，全机低头力矩增大；当迎角较小时，滑流虽然改变了机翼表面的升力分布，但是全机升力变化不大；滑流非定常影响会使全机气动特性产生周期性波动，升力系数波动幅度为9.0%，阻力系数波动幅度为10.8%，并且随着迎角的增大，波动幅度也越大。      

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.     

基于改进的卷积神经网络的步态识别

为了提高惯性传感器采集到的序列数据中步态识别的准确率,建立了一个激励层改进的卷积神经网络(CNN)模型。针对三轴加速度传感器对运动太过敏感导致步态周期划分不准确的问题,采用加速度传感器与弯曲度传感器组合获取人体运动信息。将CNN模型中激励层的线性整流函数(ReLU)改进为带泄露线性整流函数(Leaky ReLU),以解决遇到卷积输出数据小于0时神经元被抑制的问题,进而达到提高步态识别准确率的目的。实验结果表明激励层优化的CNN模型在行走、上下楼和上下坡五种步态模式下识别率达到了95.79%,与未采用弯曲度传感器的改进CNN模型和未进行激励层改进的CNN模型相比,步态识别率有所提高。     

燃气轮机多微机监控系统通讯协议的制订与实现

对舰用燃气轮机组的多微机实时控制系统提出了多微机实时控制通讯协议。该协议为面向字符的数据链路层协议,能实现全双工通讯。通讯全部采用中断方式,为保证各通信互不干扰可靠畅通进行,该协议对通信管理设计为四大模块：通信数据组织模块、通信启动发送模块、通信中断模块和通信Watchdog模块。以监测机为例,根据监测机在通信中的地位,将通讯分为监测机主动发送方式、主动接收方式、被动发送方式和被动接收方式,并对各种方式下的通信过程进行了详细的论述。