Metal creep model with the initial strain discontinuity and functional material constants

It is proposed that curves of metal creep be approximated by the time-relative linear law with the initial creep strain discontinuity; as a result, the solution of initial boundary value rheological problems is considerably simplified and is characterized by the adequate precision with a large service life. The labor intensity of computations is similar to the steady-state creep law. The introduction of functional material constants makes it possible to perform calculations of creep under the action of temperature that is different from the specified one in the basic experiments as well as calculations of nonuniformly heated structure elements.     

Flow visualization study of an airship model using a water towing tank

The work presented investigates the aerodynamic drag and flow physics of an airship configuration. The investigation is carried out experimentally in a water towing tank. The purpose of this project is to improve the understanding of the aerodynamic characteristics of an airship through quantitative and qualitative approaches. Qualitative measurements of integral drag force and moment are measured in the presence of a crosswind. Flow visualization using colored and fluorescent dyes has been applied to improve knowledge of the aerodynamics of airship configurations with an emphasis on the boundary layer separation, transition and hull–appendage interference effects.     

The Initial Stage of “Space Debris” Cloud Formation during Planetary Satellite Breakdown

The process of formation of a particles cloud (space debris) during breakdown of the Earth’s Artificial Satellite (EAS) is considered. A system of equations of motion is derived, and its analytical solution in the linear approximation for circular orbits is presented. The distinction between this solution and an exact numerical solution is indicated. The cases of satellite breakdown at the apogee and perigee on an elliptic orbit are also considered, and some characteristics of these processes are compared.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 4, 2005, pp. 269–273.Original Russian Text Copyright © 2005 by Gorelov, Zarubkin.     

Deformation of the Envelope of a Broadband Signal during Propagation through the Martian Ionosphere

The regularities of propagation along the spacecraft-Martian surface-spacecraft path of a broadband Gaussian pulse in the condition of its dispersion distortions are considered in application to the problem of radiowave pulse sounding of the near-surface soil of Mars from onboard a satellite. The Martian night-side ionosphere reduces the energy considerably but does not lead to any distortion of the pulse envelope. At the sounding of a two-layer surface, the ionosphere influence, together with the signal absorption, manifests as the lower limit of the thickness of the upper layer reached for measurements in the scope of the planned experiment [1].     

Structural optimization of lifting surfaces with regard to static aeroelasticity

A technique for choosing a rational load-carrying scheme and weight analysis at the early stages of designing lifting surfaces with the use of a special model of the finite element method is proposed. The distribution of structure loads is determined with regard for its deformation. The numerical example is presented.     

Alternative statements of optimal load-bearing structure design problems

We analyze the well-known statements of optimal design problems for load-bearing maximum rigidity structures in which a principle of the minimum of total potential energy of structure deformation is used. A version of the generalized statement of optimization problems for processes described by linear equations with a symmetric operator is proposed. On the basis of the version outlined, we present a mathematical algorithm for obtaining beam structures of maximum rigidity, in which the finite element method is used to solve an analytical problem. We give the numerical results of solving two problems of optimal design of maximum rigidity structures that are simulated by cantilever and statically indeterminate beams.     

The use of solutions to problems of spacecraft trajectory optimization in impulse formulation when solving the problems of optimal control of trajectories of a spacecraft with limited thrust engine: II

As examples of application of the technique suggested in the first part of this work, the problems of optimizing the trajectories of spacecraft transfers between circular coplanar orbits are considered in this second part. During the transfer the spacecraft is controlled by the vector of thrust of a limited-thrust jet engine. The mass consumption is minimized for a limited time of transfer. Extreme trajectories with two and three powered sections (Homan-type and bi-elliptic transfer trajectories) are numerically determined. The solution of these well-studied problems allows one to compare the results of applying the suggested technique with the results of application of other previously used techniques.     

Internal Gravitational Field of a Thin Homogeneous Ring

The potential of gravity forces is found inside a thin homogeneous ring when the ring’s mean radius is much larger than the diameter of its cross section. Rings with elliptic and almost circular cross sections are considered.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 4, 2005, pp. 260–268.Original Russian Text Copyright © 2005 by Kasatkin.     

Physiologic and metabolic responses of wheat seedlings to elevated and super-elevated carbon dioxide

The metabolic consequence of suboptimal (400 μmol mol⁻¹ or ppm), near-optimal (1500 ppm) and supra-optimal (10,000 ppm) atmospheric carbon dioxide concentrations [CO₂] was investigated in an attempt to reveal plausible underlying mechanisms for the differential physiological and developmental responses to increasing [CO₂]. Both non-targeted and targeted metabolite profiling by GC–MS and LC–MS were employed to examine primary and secondary metabolites in wheat (Triticum aestivum, cv Yocoro rojo) continuously exposed to these [CO₂] levels for 14, 21 and 28 days. Metabolite profile was altered by both [CO₂] and physiological age. In general, plants grown under high [CO₂] exhibited a metabolite profile characteristic of older plants under ambient CO₂. Elevated [CO₂] resulted in higher levels of phosphorylated sugar intermediates, though no clear trend in the content of reducing sugars was observed. Transient starch content was enhanced by increasing [CO₂] to a much greater extent at 10,000 ppm CO₂ than at 1500 ppm CO₂. The percentage increase of starch content resulting from CO₂ enrichment declined as plants develope. In contrast, elevated [CO₂] promoted the accumulation of secondary metabolites (flavonoids) progressively to a greater extent as plants became mature. Elevated [CO₂] to 1500 ppm induced a higher initial growth rate, while super-elevated [CO₂] appeared to negate such initial growth promotion. However, after 4 weeks, there was no difference in vegetative growth between 1500 and 10,000 ppm CO₂-grown plants, both elevated CO₂ levels resulted in an overall 25% increase in biomass over the control plants. More interestingly, elevated atmospheric [CO₂] reduced evapotranspiration rate (ET), but further increase to the supra-optimal level resulted in increased ET (a reversed trend), i.e. ET at 1500 ppm < ET at 10,000 ppm < ET at 400 ppm. The differential effect of elevated and super-elevated CO₂ on plants was further reflected in the nitrogen dynamics. These results provide the potential metabolic basis for the differential productivity and stomatal function of plants grown under elevated and super-elevated CO₂ levels.     

Scale analysis of pre- and post-midnight ESF bubbles at storm time and quiet time

This paper adopts a scale analysis technique to investigate the properties of intermediate-scale plasma structures observed by ROCSAT-1 in the equatorial F-region. A procedure of scale analysis that is developed via the empirical mode decomposition (EMD) method of Hilbert–Huang transform (HHT) technique allows the mutually correlated components in velocity, density and relative density gradient to be identified and extracted. Comparing the three parameters, good match in wave form is found for density and velocity in the scales between kilometers and hundred meters (few kilometers to 300 m). It implies that there are electric fields proportional to density fluctuation −δn/n in the form similar to what is expected for the generalized Rayleigh–Taylor instability. We find that such a one-to-one match holds for various pre- and post-midnight ESF bubbles during quiet and storm times. It, therefore, means that spatial structures of electric field in the intermediate-scale (300 m to few kilometers) correlates to the density structures in a manner of δE ∝  −δn/n that is not necessarily depending on the driving mechanism of ESF bubbles, although it is known that ESF bubbles can be driven by different mechanisms under different space weather conditions. In smaller scales (300–50 m), fluctuation patterns of density and velocity do not correlate to each other any more, the good match is then found in the density gradient ∇_xn/n and velocity. It is known as the manifestation of the Boltzmann relation. We note that the GRT instability related relationship δV_z ∝  −δn/n for irregularities in scale of kilometers holds only for ESF bubbles that occur within ±5 dip latitude, while the Boltzmann relation (δV_z proportional to ∇_xn/n) holds for small-scale irregularities without such a limitation.