Maximum Likelihood Elevation Angle Estimates of Radar Targets Using Subapertures

The maximum likelihood estimates of the elevation angles of two closely spaced targets within the beamwidth is considered. For an array divided into three subapertures, a simple, closed form solution is found whose accuracy compares favorably to the maximum likelihood estimate which uses all the individual elements. Simulation results are presented for the case of a radar target located over a smooth reflecting surface.     

Missile Electronic System Hardness Assurance Program

A hardness assurance program suitable for a retaliatory or deterrent missile system is discussed. The program consists of three phases: the establishment of suitable controls and screens to ensure piece part hardness, a supplier data monitoring program to measure hardness related parameters in a timely fashion to obtain advanced warning of potential problems, and a hardness assurance verification testing (HAVT) program to periodically measure the radiation response of parts, circuits, subsystems, and systems on a sample basis to ensure proper functioning in simulated radiation environments. All of the data relevant to hardness assurance is stored in computer memory and routinely interrogated with programs which compare current results with the engineering baseline data and other data from preceding lots. Other computer programs enable statistical estimation of system response to the radiation environment with confidence based on the expanding data base provided by the HAVT program.     

Performance Analysis of the Modulation Cancellation Altimeter

The performance of the modulation cancellation altimeter is investigated. Several sources of error are considered, specifically: 1) terrain averaging error; 2) output noise fluctuations; 3) errors due to phase shifts; and 4) acquisition ambiguities. The predominant parameters affecting these errors are investigated with a view towards optimizing the performance of the altimeter.     

Graphical Interpretation of Chirp Echoes from Complex Targets

Echoes from complex targets due to chirp waveforms show different time responses for different chirp rates, because of the ambiguity of range and radial velocity information. A graphical method is described which enables the derivation of the time response for an arbitrary chirp rate when the scattering cross-section distribution in the range and radial velocity plane is known for complex targets. The graphical method can also be used to generate an approximately realistic scattering cross-section distribution when the time responses for two different chirp rates are given. An example is shown which applies to the computer simulation of the radar echo from a waking reentry space vehicle.     

Synthetic aperture radar capabilities for snow and glacier monitoring

The potential of SAR systems for monitoring the seasonal snow cover and glaciers has been investigated based on an airborne experiment in the Austrian Alps and on Seasat SAR and Shuttle Imaging Radar-A data. X- and C-band SAR are useful sensors for mapping wet snow packs, while in L-band snow-covered and snow-free surfaces often cannot be separated. SAR data in all three frequency bands provide valuable glaciological information.     

Land mobile satellite propagation experiments in Kyoto City

In February of 1990, land mobile satellite propagation experiments were conducted in Kyoto City, Japan, using the Engineering Test Satellite V (ETS-V). The signal transmitted from the satellite was received and recorded at a mobile unit moving in different streets of the downtown area. The streets chosen have typical downtown medium and high rise buildings, electric utility poles, trees, etc., which caused obstruction to the satellite line of sight. The propagation characteristics such as fade/nonfade distribution, joint fade and nonfade distribution, phase distribution, and their dependence on the antenna type are discussed for the measured link. Error characteristics in digital communication for the above link have been qualitatively analyzed on the basis of the measured signal level fluctuation. Effect of interleaving and coding to improve the communication link is also discussed     

Low energy ions in the heavy ions in space (HIIS) experiment on LDEF.

We present data from the Lexan top stacks in the Heavy Ions In Space (HIIS) experiment which was flown for six years (April 1984-Jan 1990) onboard the LDEF spacecraft in 28.5 degrees orbit at about 476 km altitude. HIIS was built of passive (i.e. no timing resolution) plastic track detectors which collected particles continuously over the entire mission. In this paper we present data on low energy heavy ions (10 < or = Z, 20MeV/nuc < E < 200 MeV/nuc). These ions are far below the geomagnetic cutoff for fully ionized ions in the LDEF orbit even after taking into account the severe cutoff suppression caused by occasional large geomagnetic storms during the LDEF mission. Our preliminary results indicate an unusual elemental composition of trapped particles in the inner magnetosphere during the LDEF mission, including both trapped anomalous cosmic ray species (Ne, Ar) and other elements (such as Mg and Fe) which are not found in the anomalous component of cosmic rays. The origin of the non-anomalous species is not understood, but they may be associated with the solar energetic particle events and geomagnetic disturbances of 1989.     

Exploring the Detached-Eddy Simulation for Main Rotor Flows

This paper applies the Detached-Eddy Simulation (DES) method to resolve a larger part of the flow spectrum around rotor blades in hover and forward flight. A comparison between DES and Unsteady Reynolds–Averaged Navier–Stokes simulation was carried out for the case of a forward flying rotor suggesting that DES has great potential for rotor applications.     

ExoMars 2016 Schiaparelli Module Trajectory and Atmospheric Profiles Reconstruction

On 19^th October 2016 Schiaparelli module of the ExoMars 2016 mission flew through the Mars atmosphere. After successful entry and descent under parachute, the module failed the last part of the descent and crashed on the Mars surface. Nevertheless the data transmitted in real-time by Schiaparelli during the entry and descent, together with the entry state vector as initial condition, have been used to reconstruct both the trajectory and the profiles of atmospheric density, pressure and temperature along the traversed path.The available data-set is only a small sub-set of the whole data acquired by Schiaparelli, with a limited data rate (8 kbps) and a large gap during the entry because of the plasma blackout on the communications.This paper presents the work done by the AMELIA (Atmospheric Mars Entry and Landing Investigations and Analysis) team in the exploitation of the available inertial and radar data. First a reference trajectory is derived by direct integration of the inertial measurements and a strategy to overcome the entry data gap is proposed. First-order covariance analysis is used to estimate the uncertainties on all the derived parameters. Then a refined trajectory is computed incorporating the measurements provided by the on-board radar altimeter.The derived trajectory is consistent with the events reported in the telemetry and also with the impact point identified on the high-resolution images of the landing site.Finally, atmospheric profiles are computed tacking into account the aerodynamic properties of the module. Derived profiles result in good agreement with both atmospheric models and available remote sensing observations.     

Regolith X-Ray Imaging Spectrometer (REXIS) Aboard the OSIRIS-REx Asteroid Sample Return Mission

The Regolith X-ray Imaging Spectrometer (REXIS) is the student collaboration experiment proposed and built by an MIT-Harvard team, launched aboard NASA’s OSIRIS-REx asteroid sample return mission. REXIS complements the scientific investigations of other OSIRIS-REx instruments by determining the relative abundances of key elements present on the asteroid’s surface by measuring the X-ray fluorescence spectrum (stimulated by the natural solar X-ray flux) over the range of energies 0.5 to 7 keV. REXIS consists of two components: a main imaging spectrometer with a coded aperture mask and a separate solar X-ray monitor to account for the Sun’s variability. In addition to element abundance ratios (relative to Si) pinpointing the asteroid’s most likely meteorite association, REXIS also maps elemental abundance variability across the asteroid’s surface using the asteroid’s rotation as well as the spacecraft’s orbital motion. Image reconstruction at the highest resolution is facilitated by the coded aperture mask. Through this operation, REXIS will be the first application of X-ray coded aperture imaging to planetary surface mapping, making this student-built instrument a pathfinder toward future planetary exploration. To date, 60 students at the undergraduate and graduate levels have been involved with the REXIS project, with the hands-on experience translating to a dozen Master’s and Ph.D. theses and other student publications.