Preliminary results of Cytos 2 experiment.

Cytos 2 experiment, carried out during the French-Soviet manned flight (July 1982), has studied the antibiotics sensitivity of bacteria cultivated in vitro during the orbital flight. The results show an increase of the antibiotics resistance and a larger thickness of the cellular envelope for the inflight cells. The increase of antibiotics resistance can be related to a stimulating effect of space on the cell growth rate or to changes of the cellular envelope structure.     

Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

The Proper Computation of the Matrix Pseudoinverse and its Impact in MVRO Filtering

There have been two new algorithms of fairly recent origin offered for the calculation of the matrix pseudoinverse. Unfortunately, nonpathological counterexamples can be constructed, as offered herein, that demonstrate the questionable nature of these two algorithms; however, a resolution is offered here to help prevent possible uncritical propagation of the questionable algorithms. As a rigorous alternative, a well-established technique (endorsed by numerical analysts) is reviewed for calculating the correct matrix pseudoinverse using a computer. Additionally, this technique possesses existent independently verified/validated and assessible software code for a convenient implementation. However, historical loose ends in calculating the associated condition number are singled out here as cause for concern and as a topic for future resolution and refinement. Finally, as the primary motivation for considering these issues, an application example is offered from estimation theory in the implementation and analysis of a minimum variance reduced-order (MVRO) filter having proper performance that critically hinges on the correct computation of the matrix pseudoinverse. While examples of applying MVRO to navigation applications were provided almost a decade ago, a clear indication of the somewhat restrictive conditions of applicability were wanting and so are elucidated here since there appears to be a resurgence of interest in this analytic technique. Another contribution is in providing a tally of the drawbacks to be incurred in using MVRO as well as its previously publicized benefits.     

Hardware-in-the-loop testing technology for integrated control and condition monitoring systems of aircraft gas turbine engines

Hardware-in-the-loop testing technology for automatic control, condition monitoring and diagnostics systems of gas turbine engines is described. The technology proposed makes it possible to simulate combinations and chains of unexpected and gradual failures of engines, transducers and actuators.     

Algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter

The algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter is considered; the support makes it possible to significantly reduce accumulating errors that are due to incomplete data on wind parameters and decrease requirements for random errors of initial data sensors.     

A set of systems for labor standards computer-aided design

A set of systems for labor standard computer-aided design is described, namely, initial developments, advance and state-of-the art.     

A combined turbulent combustion model in studying a lean flameout process

A modification of the Zimont turbulent combustion model is presented; the modification makes it possible to describe processes in diffusion and homogeneous flame fronts as well as to take into account the influence of different factors that cause flame destabilization. The model is based on the equation for a reaction completeness extent (completeness of combustion). The model realization to simulate the premixed combustion is described and the modification of the turbulent combustion model is applied to simulate a process of flameout downstream of the flameholder.     

Dynamic qualification of the HIRENASD elastic wing model

The High Reynolds Number Aero-Structural Dynamics (HIRENASD) project is conducted by the Collaborative Research Center “Flow Modulation and Fluid-Structure Interaction at Airplane Wings (SFB 401)” at RWTH Aachen University. It is funded by the Deutsche Forschungsgemeinschaft (German Research Foundation, DFG) since 2004. Steady and unsteady state experiments with an elastic semispan wing model were performed under transonic and high Reynolds number conditions in the European Transonic Windtunnel (ETW) in Cologne, Germany. The main components of the complete windtunnel assembly were the wing model itself, a piezoelectric 6-components balance and a mechanical excitation mechanism able to excite the wing model at selected resonance frequencies. These components were designed, sized and assembled at the Department of Aerospace and Lightweight Structures at RWTH Aachen University. The dynamic qualification of the windtunnel assembly under wind-off condition was carried out in the department's test laboratory. Modal survey testing based on the hammer impact method was performed, as well as response decomposition analysis using enforced excitation by means of the mechanical excitation mechanism itself. Within the qualification, a test procedure enabling investigations of modal parameter changes under wind-off and wind-on conditions in a cryogenic windtunnel was also verified.     

Cometary Refractory Grains: Interstellar and Nebular Sources

Comets are heterogeneous mixtures of interstellar and nebular materials. The degree of mixing of interstellar sources and nebular sources at different nuclear size scales holds the promise of revealing how cometary particles, cometesimals, and cometary nuclei accreted. We can ascribe cometary materials to interstellar and nebular sources and see how comets probe planet-forming process in our protoplanetary disk. Comets and cometary IDPs contain carbonaceous matter that appears to be either similar to poorly-graphitized (amorphous) carbon, a likely ISM source, or highly labile complex organics, with possible ISM or outer disk heritage. The oxygen fugacity of the solar nebula depends on the dynamical interplay between the inward migration of carbon-rich grains and of icy (water-rich) grains. Inside the water dissociation line, OH^? reacts with carbon to form CO or CO₂, consuming available oxygen and contributing to the canonical low oxygen fugacity. Alternatively, the influx of water vapor and/or oxygen rich dust grains from outer (cooler) disk regions can raise the oxygen fugacity. Low oxygen fugacity of the canonical solar nebula favors the condensation of Mg-rich crystalline silicates and Fe-metal, or the annealing of Fe-Mg amorphous silicates into Mg-rich crystals and Fe-metal via Fe-reduction. High oxygen fugacity nebular conditions favors the condensation of Fe-bearing to Fe-rich crystalline silicates. In the ISM, Fe-Mg amorphous silicates are prevalent, in stark contrast to Mg-rich crystalline silicates that are rare. Hence, cometary Mg-rich crystalline silicates formed in the hot, inner regions of the canonical solar nebula and they are the touchstone for models of the outward radial transport of nebular grains to the comet-forming zone. Stardust samples are dominated by Mg-rich crystalline silicates but also contain abundant Fe-bearing and Fe-rich crystalline silicates that are too large (?0.1 μm) to be annealed Fe-Mg amorphous silicates. By comparison with asteroids, the Stardust Fe-bearing and Fe-rich crystalline silicates suggests partial aqueous alteration in comet nuclei. However, aqueous alteration transforms Fe-rich olivine to phyllosilicates before Mg-rich olivine, and Stardust has Mg-rich and Fe-rich olivine and no phyllosilicates. Hence, we look to a nebular source for the moderately Fe-rich to nearly pure-Fe crystalline silicates. Primitive matrices have Mg-Fe silicates but no phyllosilicates, supporting the idea that Mg-Fe silicates but not phyllosilicates are products of water-rich shocks. Chondrule-formation is a late stage process in our protoplanetary disk. Stardust samples show comet 81P/Wild 2 formed at least as late to incorporate a few chondrules, requiring radial transport of chondrules out to perhaps >20 AU. By similar radial transport mechanisms, collisional fragments of aqueously altered asteroids, in particular achondrites that formed earlier than chondrules, might reach the comet-forming zones. However, Stardust samples do not have phyllosilicates and chondrules are rare. Hence, the nebular refractory grains in comet 81P/Wild 2, as well as other comets, appear to be pre-accretionary with respect to asteroid parent bodies. By discussing nebular pathways for the formation of Fe-rich crystalline silicates, and also phyllosilicates and carbonates, we put forth the view that comets contain both the interstellar ingredients for and the products of nebular transmutation.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.