Possibilities of parallel calculations in solving gas dynamics problems in the CFD environment of FLUENT software

The results of studying an incompressible gas flow field in a periodic element of the porous structure made up of the same radius spheres are presented; the studies were based on the solution of the Navier-Stokes equations using FLUENT software. The possibilities to accelerate the solution process with the use of parallel calculations are investigated and the calculation results under changes of pressure differential in the periodic element are given.     

Emergence of a Habitable Planet

We address the first several hundred million years of Earth’s history. The Moon-forming impact left Earth enveloped in a hot silicate atmosphere that cooled and condensed over ∼1,000 yrs. As it cooled the Earth degassed its volatiles into the atmosphere. It took another ∼2 Myrs for the magma ocean to freeze at the surface. The cooling rate was determined by atmospheric thermal blanketing. Tidal heating by the new Moon was a major energy source to the magma ocean. After the mantle solidified geothermal heat became climatologically insignificant, which allowed the steam atmosphere to condense, and left behind a ∼100 bar, ∼500 K CO₂ atmosphere. Thereafter cooling was governed by how quickly CO₂ was removed from the atmosphere. If subduction were efficient this could have taken as little as 10 million years. In this case the faint young Sun suggests that a lifeless Earth should have been cold and its oceans white with ice. But if carbonate subduction were inefficient the CO₂ would have mostly stayed in the atmosphere, which would have kept the surface near ∼500 K for many tens of millions of years. Hydrous minerals are harder to subduct than carbonates and there is a good chance that the Hadean mantle was dry. Hadean heat flow was locally high enough to ensure that any ice cover would have been thin (<5 m) in places. Moreover hundreds or thousands of asteroid impacts would have been big enough to melt the ice triggering brief impact summers. We suggest that plate tectonics as it works now was inadequate to handle typical Hadean heat flows of 0.2–0.5 W/m². In its place we hypothesize a convecting mantle capped by a ∼100 km deep basaltic mush that was relatively permeable to heat flow. Recycling and distillation of hydrous basalts produced granitic rocks very early, which is consistent with preserved >4 Ga detrital zircons. If carbonates in oceanic crust subducted as quickly as they formed, Earth could have been habitable as early as 10–20 Myrs after the Moon-forming impact.     

The J-MASS Marketplace: a new way for DoD to do business

It is current DoD policy to use commercial off-the-shelf software whenever it meets DoD requirements. The application of this policy to modeling and simulation has resulted in the concept of “The Joint Modeling and Simulation System (J-MASS) Marketplace.” J-MASS is designed as an Open Systems Architecture with the capability for the Simulation Support Environment (SSE) to be expanded by the addition of site specific software. In the “J-MASS Marketplace” industry will build commercial tools to work with J-MASS and individual organizations will license what they need for their particular site. The J-MASS SSE is a framework or backplane into which everything else plugs. A J-MASS product release would have the core capabilities, but the unique needs of various organizations would be satisfied by industry. This paper addresses how the J-MASS Marketplace could work and how compliance can be defined. It will outline opportunities for industry in both building software for the Marketplace and in defining the Marketplace concept     

Analysis of queuing behavior of automatic ESM systems

Radar electronic support measures (ESM) systems detect active emitters in a given area and determine their identities and bearings. The high arrival rate of radar pulses in dense emitter environments demands fast automatic processing of arriving pulses so that the ESM system can fulfill its functions properly in real time. Yet, the performance analysis of automatic ESM system in real life Is difficult since both pulse arrivals and widths can be specified only probabilistically. The success of queuing theory in many applications such as computer communication networks and flow-control has encouraged designers to utilize queuing theory in qualifying and judging the performance of automatic ESM systems in dense emitter environments. The queuing behavior of these systems is analytically evaluated under different service disciplines and elaborate computer simulations validate the results. The analysis involves statistical modeling of arrival and departure processes as well as distribution of service times. It permits estimating the blocking probability due to high arrival rates of intercepted radar pulses or due to limited speed of the deinterleaver processor. Queuing analysis is shown to be quite useful to quantitatively assess tradeoffs in ESM systems design     

Millimeter wave radar with clutter measurements

A portable millimeter wave test radar system, also suitable for battery operation, gives interesting possibilities for clutter recordings at hard-to-reach sites. The designed system covers all common radar frequencies from the Ka- to V-bands and enables spatial detection of targets or clutter elements within an adjustable time gate, whereby spatial clutter profiles of rain can be analyzed. The construction allows full operation with non-scanning antennas as well. This is advantageous when measuring temporal RCS variations of selected targets or surface clutter from snow dunes.     

Time-dependent thermal X-ray afterglows from GRBS

Time-dependent thermal X-ray spectra are calculated from physically plausible conditions around GRB. It is shown that account for time-dependent ionization processes strongly affects the observed spectra of hot rarefied plasma. These calculations may provide an alternative explanation to the observed X-ray lines of early GRBs afterglows (such as GRB 011211). Our technique will allow one to obtain independent constraints on the GRB collimation angle and on the clumpiness of circumstellar matter.     

Power anomaly effects and costs in low-voltage mobile power systems

Electric power anomalies or disturbances can disrupt the normal operation of equipment, accelerate aging, or even cause outright failures thus resulting in increased costs of maintenance and reduced system reliability. Past research on the effects caused by power anomalies has been mostly focused on industrial, commercial, or residential systems, or on power distribution equipment. A literature survey reveals that there is no comprehensive review related to low-voltage (LV) power systems and utilization equipment applicable to military combat vehicles, such as aircraft and ships. This paper summarizes the results of a new literature survey that focused on the causes, effects, and mitigation methods for power anomalies typical of LV mobile power systems. Electric power anomaly cost data collected from the literature are also presented, from which the costs of anomalies to the national defense are estimated using some simple rationales.     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

Relationship between daily variation of cosmogenic nuclide Be-7 concentration in atmosphere and solar activities

Daily Be-7 concentrations in air at the height of 15 m are continuously observed at 38°15.2′N, 140°20.9′E, between 2000 and 2001. The average concentration and the relative standard deviation were 4.0 mBq/m³ and 50% in 2000–2001, respectively. The Be-7 concentrations increased 2.5% with the decrease in the sunspot numbers by 6.7% for the term of two years. From the power spectral analysis, the periodicity of 26 days is shown for the daily Be-7 concentrations. The folding analysis indicates that the time variation of the Be-7 concentration is similar to that of the ground-based neutron counting rate, and the phase delay for the minimum portion of Be-7 concentration was roughly 8 days to the maximum sunspot number. These results indicate that the Be-7 concentrations in the air at ground level have 26 day periodicity as a component of time variations and the time variation is caused by the solar modulation of galactic cosmic rays, which corresponds to the variation of the sunspot number due to the rotation of the sun.