Millimeter wave radar with clutter measurements

A portable millimeter wave test radar system, also suitable for battery operation, gives interesting possibilities for clutter recordings at hard-to-reach sites. The designed system covers all common radar frequencies from the Ka- to V-bands and enables spatial detection of targets or clutter elements within an adjustable time gate, whereby spatial clutter profiles of rain can be analyzed. The construction allows full operation with non-scanning antennas as well. This is advantageous when measuring temporal RCS variations of selected targets or surface clutter from snow dunes.     

The conceptual design of a hybrid life support system based on the evaluation and comparison of terrestrial testbeds.

This report summarizes a trade study of different options of a bioregenerative Life Support System (LSS) and a subsequent conceptual design of a hybrid LSS. The evaluation was based mainly on the terrestrial testbed projects MELISSA (ESA) and BIOS (Russia). In addition, some methods suggested by the Advanced Life Support Project (NASA) were considered. Computer models, including mass flows were established for each of the systems with the goal of closing system loops to the extent possible. In order to cope with the differences in the supported crew size and provided nutrition, all systems were scaled for supporting a crew of six for a 780 day Mars mission (180 days transport to Mars; 600 days surface period) as given in the NASA Design Reference Mission Scenario [Hoffman, S.J., Kaplan, D.L. Human exploration of Mars: the Reference Mission of the NASA Mars Exploratory Study, 1997]. All models were scaled to provide the same daily allowances, as of calories, to the crew. Equivalent System Mass (ESM) analysis was used to compare the investigated system models against each other. Following the comparison of the terrestrial systems, the system specific subsystem options for Food Supply, Solid Waste Processing, Water Management and Atmosphere Revitalization were evaluated in a separate trade study. The best subsystem technologies from the trade study were integrated into an overall design solution based on mass flow relationships. The optimized LSS is mainly a bioregenerative system, complemented by a few physico-chemical elements, with a total ESM of 18,088 kg, which is about 4 times higher than that of a pure physico-chemical LSS, as designed in an earlier study.     

Some comparisons of orbit determination and parameter estimation based on LAGEOS 1 and LAGEOS 2 data

The modelling accuracy of the LAGEOS 1 orbit was continously improved since its launch in 1976. In spite of these experiences the modelling accuracy of LAGEOS 2 is still about 20 per cent worse. Considering e. g. only the influence of different gravity field models it has been shown that the orbital fits for arc lengths of one month is generally about 25 mm for LAGEOS 1 and more than 30 mm for LAGEOS 2. This is mainly due to the fact that LAGEOS 2 has not yet been used for the determination of most gravity field models. The influences of different model parameters on the estimation of station coordinates, Earth rotation parameters, the geogravitational coefficient, the radiation pressure coefficient, and the empirical acceleration has been studied. The differences and peculiarities of both satellites are discussed. Although the analysis of LAGEOS 2 data still does not reach the high level of LAGEOS 1 combination solutions using both satellites allow new insights, higher accuracies, and a higher time resolution for the parameters and phenomena investigated.     

A three-dimensional plasma and energetic particle investigation for the wind spacecraft

This instrument is designed to make measurements of the full three-dimensional distribution of suprathermal electrons and ions from solar wind plasma to low energy cosmic rays, with high sensitivity, wide dynamic range, good energy and angular resolution, and high time resolution. The primary scientific goals are to explore the suprathermal particle population between the solar wind and low energy cosmic rays, to study particle accleration and transport and wave-particle interactions, and to monitor particle input to and output from the Earth's magnetosphere.Three arrays, each consisting of a pair of double-ended semi-conductor telescopes each with two or three closely sandwiched passivated ion implanted silicon detectors, measure electrons and ions above 20 keV. One side of each telescope is covered with a thin foil which absorbs ions below 400 keV, while on the other side the incoming <400 keV electrons are swept away by a magnet so electrons and ions are cleanly separated. Higher energy electrons (up to 1 MeV) and ions (up to 11 MeV) are identified by the two double-ended telescopes which have a third detector. The telescopes provide energy resolution of E/E0.3 and angular resolution of 22.5°×36°, and full 4 steradian coverage in one spin (3 s).Top-hat symmetrical spherical section electrostatic analyzers with microchannel plate detectors are used to measure ions and electrons from 3 eV to 30 keV. All these analyzers have either 180° or 360° fields of view in a plane, E/E0.2, and angular resolution varying from 5.6° (near the ecliptic) to 22.5°. Full 4 steradian coverage can be obtained in one-half or one spin. A large and a small geometric factor analyzer measure ions over the wide flux range from quiet-time suprathermal levels to intense solar wind fluxes. Similarly two analyzers are used to cover the wide range of electron fluxes. Moments of the electron and ion distributions are computed on board.In addition, a Fast Particle Correlator combines electron data from the high sensitivity electron analyzer with plasma wave data from the WAVE experiment (Bougeretet al., in this volume) to study wave-particle interactions on fast time scales. The large geometric factor electron analyzer has electrostatic deflectors to steer the field of view and follow the magnetic field to enhance the correlation measurements.     

Dynamic qualification of the HIRENASD elastic wing model

The High Reynolds Number Aero-Structural Dynamics (HIRENASD) project is conducted by the Collaborative Research Center “Flow Modulation and Fluid-Structure Interaction at Airplane Wings (SFB 401)” at RWTH Aachen University. It is funded by the Deutsche Forschungsgemeinschaft (German Research Foundation, DFG) since 2004. Steady and unsteady state experiments with an elastic semispan wing model were performed under transonic and high Reynolds number conditions in the European Transonic Windtunnel (ETW) in Cologne, Germany. The main components of the complete windtunnel assembly were the wing model itself, a piezoelectric 6-components balance and a mechanical excitation mechanism able to excite the wing model at selected resonance frequencies. These components were designed, sized and assembled at the Department of Aerospace and Lightweight Structures at RWTH Aachen University. The dynamic qualification of the windtunnel assembly under wind-off condition was carried out in the department's test laboratory. Modal survey testing based on the hammer impact method was performed, as well as response decomposition analysis using enforced excitation by means of the mechanical excitation mechanism itself. Within the qualification, a test procedure enabling investigations of modal parameter changes under wind-off and wind-on conditions in a cryogenic windtunnel was also verified.