Missile Electronic System Hardness Assurance Program

A hardness assurance program suitable for a retaliatory or deterrent missile system is discussed. The program consists of three phases: the establishment of suitable controls and screens to ensure piece part hardness, a supplier data monitoring program to measure hardness related parameters in a timely fashion to obtain advanced warning of potential problems, and a hardness assurance verification testing (HAVT) program to periodically measure the radiation response of parts, circuits, subsystems, and systems on a sample basis to ensure proper functioning in simulated radiation environments. All of the data relevant to hardness assurance is stored in computer memory and routinely interrogated with programs which compare current results with the engineering baseline data and other data from preceding lots. Other computer programs enable statistical estimation of system response to the radiation environment with confidence based on the expanding data base provided by the HAVT program.     

Performance Analysis of the Modulation Cancellation Altimeter

The performance of the modulation cancellation altimeter is investigated. Several sources of error are considered, specifically: 1) terrain averaging error; 2) output noise fluctuations; 3) errors due to phase shifts; and 4) acquisition ambiguities. The predominant parameters affecting these errors are investigated with a view towards optimizing the performance of the altimeter.     

Graphical Interpretation of Chirp Echoes from Complex Targets

Echoes from complex targets due to chirp waveforms show different time responses for different chirp rates, because of the ambiguity of range and radial velocity information. A graphical method is described which enables the derivation of the time response for an arbitrary chirp rate when the scattering cross-section distribution in the range and radial velocity plane is known for complex targets. The graphical method can also be used to generate an approximately realistic scattering cross-section distribution when the time responses for two different chirp rates are given. An example is shown which applies to the computer simulation of the radar echo from a waking reentry space vehicle.     

The state experiment — mesospheric dynamics

The $\text{ST}$ructure and $\text{A}$tmospheric $\text{T}$urbulence $\text{E}$nvironment (STATE) experiment was conducted during the second week of June 1983 at Poker Flat Research Range, Alaska. The measurements focus on a study of the middle atmosphere dynamics by comparison between in-situ probe measurements and MST radar measurements. Rocket launchings were conducted at three periods which were selected by monitoring the doppler velocity spectra of the MST radar.The STATE program has included the efforts of several scientists in planning and carrying out the ground-based and rocket measurements. An overview of the program is given together with some preliminary results. The regions in intense backscatter signals detected by the MST radar are shown to correlate with large irregularities in the electron profiles measured.     

Scientific results from the pioneer Saturn infrared radiometer

The Pioneer 11 Infrared Radiometer instrument made observations of Saturn and its rings in broadband channels centered at 20 and 45 μm and obtained whole-disk information on Titan. A planetary average effective temperature of 96.5±2.5 K implies a total emission 2.8 times the absorbed sunlight. Correlation with radio science results implies that the molar fraction of H₂ is 90±3% (assuming the rest is He). Temperatures at the 1 bar level are 137 to 140 K; regions appearing cooler may be overlain by a cloud acting as a 124 K blackbody surface. A minimum temperature averaging 87 K is reached near 0.06 bars. Ring boundaries and optical depths are consistent with those at optical wavelengths. Ring temperatures are 64–86 K on the south (illuminated) side, ～54 K on the north (unilluminated) side, and at least 67 K in Saturn's shadow. There is evidence for a south to north drop in ring temperatures. Titan's 45 μm brightness temperature is 75±5 K.     

Slope Coding of Coherent Pulse-Burst Waveforms

Useful new properties are obtained with a coherent pulse-burst waveform if the FM slopes are allowed to change from pulse to pulse. A design feature using such a "slope-coded" waveform is the ability to transfer, in a controllable manner, ambiguity volume from the range ambiguity peaks to regions located between the peaks (in the frequency direction). Slope coding thus provides a useful mechanism for matching the waveform to the environment; i. e., it permits the signal designer to make some compromise between range ambiguity-peak heights and low-velocity clutter rejection.     

Synthetic aperture radar capabilities for snow and glacier monitoring

The potential of SAR systems for monitoring the seasonal snow cover and glaciers has been investigated based on an airborne experiment in the Austrian Alps and on Seasat SAR and Shuttle Imaging Radar-A data. X- and C-band SAR are useful sensors for mapping wet snow packs, while in L-band snow-covered and snow-free surfaces often cannot be separated. SAR data in all three frequency bands provide valuable glaciological information.     

Land mobile satellite propagation experiments in Kyoto City

In February of 1990, land mobile satellite propagation experiments were conducted in Kyoto City, Japan, using the Engineering Test Satellite V (ETS-V). The signal transmitted from the satellite was received and recorded at a mobile unit moving in different streets of the downtown area. The streets chosen have typical downtown medium and high rise buildings, electric utility poles, trees, etc., which caused obstruction to the satellite line of sight. The propagation characteristics such as fade/nonfade distribution, joint fade and nonfade distribution, phase distribution, and their dependence on the antenna type are discussed for the measured link. Error characteristics in digital communication for the above link have been qualitatively analyzed on the basis of the measured signal level fluctuation. Effect of interleaving and coding to improve the communication link is also discussed     

The early history of pulse compression radar-the history of pulsecompression at Sperry Gyroscope Company

The development of pulse compression radar at Sperry is related on the basis of the author's personal recollections. He discusses the first experiments, concept improvements, demonstration of the concept, system implementations, dealings with the US Patent Office, and finishing touches