Detection of long-duration narrowband processes

Detecting long, weak signals that are narrowband but of unknown frequency structure is an important signal processing challenge, with many applications in remote sensing and process monitoring. An ad hoc scheme is developed. Its stages include the discrete Fourier transform (DFT), a multiresolution decomposition in the frequency domain, and a generalized likelihood ratio test (GLRT). The computational load is light, and the performance is remarkably good. This is so not just in the original narrowband situation, but also, due to an inherent adaptivity to the data, in the detection of signals that are relatively broadband in nature. Generalizations are given to constant false alarm rate (CFAR) operation in both prewhitened and unwhitened cases, and to the detection of multiband signals. As regards the last, it is discovered that there is little loss from overestimating the number of bands     

边条机翼布局战斗机稳定性改进研究

对边条机翼布局战斗机的纵，横向稳定性改进措施进行了研究，结合具体战斗机布局，给出了边条机翼布局战斗机纵，横向稳定性的一般特征，对前缘襟翼下偏，翼刀，平尾下反和机身截面修形等几种气动布局改进措施的风洞试验结果进行了简要讨论，结果表明，所研究的气动布局改进措施都能有效提高边条机翼布局战斗机的稳定性，其中，前缘襟翼下偏既能完全克服俯仰力矩曲线非线性上翘问题，又能较好地解决横侧向稳定性丧失问题。     

弹翼对旋成体底部流动的影响

本文利用压强测量及纹影观测技术研究弹翼对旋成体底部流动及底阻的影响，研究对象包括有无收缩船尾的两种后体，并同时测量了模型的底面和侧面压强分布，通过实验观测结果和理论分析，得到较细致的弹翼干扰结果，有助于进一步认识底部注以动特性及上游干扰，对飞行器设计有实用意义。     

重复热处理工艺对30CrMnSiA钢疲劳性能的影响

本文介绍了30CrMnSiA钢的九种不同的重复热处理工艺,结果显示B种热处理工艺能使30CrMnSiA钢具有最佳的抗疲劳性能并证明不同的重复热处理状态对钢的疲劳性能有影响.     

基于Ethernet网络数据监听的实现与防范

网络监听能有效地截获网络上的数据,但对网络信息安全也造成极大威胁。论文设计的以太网(Ethernet)的监听手段可以监视网络的状态,检测网络的性能,并提出了几种有效的网络监听防范措施。     

条形码在机房管理系统中的应用

文章介绍了基于条形码技术的机房管理系统的网络构建及其功能模块设计，以及条形码在系统设计中的技术实现。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

基于DSM的型号研制项目过程建模

通过分析型号研制项目活动之间的关系,建立了基于DSM的型号研制项目过程结构化模型,给出了具体实现项目过程的DSM方法,包括活动分解、耦合活动集的识别和耦合活动集的解耦方法,实现了型号研制项目过程的优化重组,最后,通过一个实例说明了该建模方法的实用性和有效性.     

PLM支持下的数字化制造

越来越多的制造企业从长远发展的战略考虑,精心规划和积极构建企业信息系统集成框架,为深化企业信息共享.推动企业创新打基础.传统的制造行业,特别是装备制造业,在PLM战略支持下的数字化制造平台,将给企业创新添加新的活力.     

航天电子产品金属晶须形成机理、危害及抑制措施分析

金属晶须自发生长是材料科学中长期受到关注的科学现象.随着航天电子产品集成度的提高,由金属晶须自发生长引起的短路和电子故障问题对航天电子产品的可靠性构成了潜在的威胁.因此,研究金属晶须的生长规律,分析金属晶须的生长机理,探寻抑制金属晶须生长的技术手段成为当前研究的热点.针对近年来国内外对金属晶须生长现象的一些相关研究进行了分析,主要包括金属晶须的生长行为、各种影响金属晶须生长的因素、解释锡晶须生长机理的理论等.结合航天型号金属晶须生长导致的故障,对晶须危害进行了分析,并提出了金属晶须抑制的常用措施.