“卓越计划”背景下空管专业师资队伍建设

"卓越工程师教育培养计划"是高等工程教育实现跨越的关键突破口。基于当前存在的空管专业高等教育现状中的问题,结合"卓越计划"目标和要求,中国民航大学在前期探究和实践基础上,利用校企联合等多种模式建设"专业化、工程化、国际化"的师资队伍,使教师的综合素质得到提高,对当前高等工程教育师资队伍的建设有一定的借鉴意义。     

惯性平台系统摇摆条件下的漂移处理方法

惯性平台在摇摆条件下,由于轴端摩擦力矩的存在,导致在摇摆运动时影 响平台稳定性,引起平台各轴附加常值漂移。介绍了两种惯性平台摇摆条件下的漂移处 理方法, 第一种方法利用平台轴端框架角传感器的输出数据, 首先使用离散傅里叶变 换得到数据频谱, 其次根据数据频谱设计数字滤波器, 对得到的数据进行滤波处理, 最后使用线性回归法对滤波后的数据进行拟合, 从而得到摇摆条件下平台摇摆漂移; 第二种方法使用加速度计的输出, 根据敏感的加速度可以得到敏感轴与重力加速度的 角度, 由此计算出摇摆过程的漂移速度。实验表明, 频谱分析法可以进行三个方向的 计算, 但台体轴结果的稳定性不好; 加速度输出拟合方法虽只可进行两个方向的计 算,但稳定性较好。     

UMR: A utility-maximizing routing algorithm for delay-sensitive service in LEO satellite networks

This paper develops a routing algorithm for delay-sensitive packet transmission in a low earth orbit multi-hop satellite network consists of micro-satellites. The micro-satellite low earth orbit(MS-LEO) network endures unstable link connection and frequent link congestion due to the uneven user distribution and the link capacity variations. The proposed routing algorithm,referred to as the utility maximizing routing(UMR) algorithm, improve the network utility of the MS-LEO network for carrying flows with strict end-to-end delay bound requirement. In UMR, first, a link state parameter is defined to capture the link reliability on continuing to keep the end-to-end delay into constraint; then, on the basis of this parameter, a routing metric is formulated and a routing scheme is designed for balancing the reliability in delay bound guarantee among paths and building a path maximizing the network utility expectation. While the UMR algorithm has many advantages, it may result in a higher blocking rate of new calls. This phenomenon is discussed and a weight factor is introduced into UMR to provide a flexible performance option for network operator. A set of simulations are conducted to verify the good performance of UMR, in terms of balancing the traffic distribution on inter-satellite links, reducing the flow interruption rate,and improving the network utility.     

Achieving the capacity of half-duplex degraded relay channels using polar coding

In this paper, a novel transmission protocol based on polar coding is proposed for the half-duplex degraded relay channel. In the proposed protocol, referred to as the partial message relaying, the relay only needs to forward a part of the decoded source message that the destination needs according to the exquisite nested structure of polar codes. Theoretically, it is proved that the scheme can achieve the capacity of the half-duplex relay channel under the decode-and-forward （DF） cooperation strategy while enjoying low encoding/decoding complexity. Practically, in order to minimize the global transmission power, the optimization of the power allocation is performed between the source and the relay by using information theoretic tools. Furthermore, a joint iterative soft parallel interference cancellation receiver structure is developed to suit to the proposed scheme. Simulation results show that the proposed scheme outperforms the conventional scheme designed by low-density parity-check （LDPC） codes.     

A novel in-plane mode rotary ultrasonic motor

Ultrasonic motors have the merits of high ratio of torque to volume, high positioning precision, intrinsic holding torque, etc., compared to the conventional electromagnetic motors. There have been several potential applications for this type of motor in aerospace exploration, but bearings and bonding mechanism of the piezoelectric ring in the motors limit the performance of them in the space operation conditions. It is known that the Langevin type transducer has excel- lent energy efficiency and reliability. Hence using the Langevin type transducer in ultrasonic motors may improve the reliability of piezoelectric motors for space applications. In this study, a novel in-plane mode rotary ultrasonic motor is designed, fabricated, and characterized. The proposed motor operates in in-plane vibration mode which is excited by four Langevin-type bending vibra- tors separately placed around a ring-shaped stator. Two tapered rotors are assembled to the inner ring of the stator and clamped together by a screw nut. In order to make the motor more stable and convenient to fix, a thin cylindrical support is placed under the stator ring. Due to its no-bearing structure and Langevin transducer excitation, the prototype ultrasonic motor may operate well in aeronautic and astronautic environments.     

An integrated graphic–taxonomic–associative approach to analyze human factors in aviation accidents

Human factors are critical causes of modern aviation accidents. However, existing accident analysis methods encounter limitations in addressing aviation human factors, especially in complex accident scenarios. The existing graphic approaches are effective for describing accident mechanisms within various categories of human factors, but cannot simultaneously describe inadequate human–aircraft–environment interactions and organizational deficiencies effectively, and highly depend on analysts' skills and experiences. Moreover, the existing methods do not emphasize latent unsafe factors outside accidents. This paper focuses on the above three limitations and proposes an integrated graphic–taxonomic–associative approach. A new graphic model named accident tree(AcciTree), with a two-mode structure and a reaction-based concept, is developed for accident modeling and safety defense identification. The AcciTree model is then integrated with the well-established human factors analysis and classification system(HFACS) to enhance both reliability of the graphic part and logicality of the taxonomic part for improving completeness of analysis. An associative hazard analysis technique is further put forward to extend analysis to factors outside accidents, to form extended safety requirements for proactive accident prevention. Two crash examples, a research flight demonstrator by our team and an industrial unmanned aircraft, illustrate that the integrated approach is effective for identifying more unsafe factors and safety requirements.     

环境压力对双组分运动液滴蒸发特征影响的理论研究

为获得亚临界条件下,环境压力对双组分运动液滴蒸发特性的影响规律,基于多组分液滴蒸发模型,对癸烷—乙醇二元混合液滴在高温氮气环境下的运动蒸发过程开展模型研究。通过模型计算,获得了液滴内部浓度分布、温度分布和液滴速度随时间的变化;分析了在环境压力0.1MPa和2MPa下,不同浓度液滴温度、尺寸及表面乙醇浓度的变化特征。结果表明:双组分液滴运动蒸发过程中,内部存在显著浓度和温度梯度,传热扩散快于传质扩散。常压环境下,液滴温度经历瞬态加热和平衡蒸发两个阶段,而高压环境下,液滴温度逐渐升高至接近环境温度。双组分液滴蒸发过程中由于组分浓度随时间变化,其无量纲尺寸随时间变化明显偏离"d 2理论";环境压力越高,液滴运动的贯穿距离越短,蒸发速率越慢。乙醇浓度对液滴蒸发速率的影响有两方面:蒸发前期,乙醇浓度越高,液滴蒸发速率越快;而蒸发后期,乙醇浓度越高,液滴蒸发速率反而越慢。     

多输入多输出雷达的非均匀线性阵列配置(英文)

提出了利用非均匀线性阵列(Non-uniform linear array,NLA)对多输入多输出(Multiple-input multipleoutput,MIMO)雷达系统进行阵列配置优化的方法。在传统的相控阵雷达中,非均匀线性阵列配置被用来形成较窄的波束方向图,而在MIMO雷达中,利用非均匀线性阵列来获得更多的互不相同的虚拟阵元,以此来提高雷达的参数可辨识性能。文中所采用的一种非均匀线性阵列是最小冗余线性阵列,并给出了一种在物理阵元数量较大时最小冗余线性阵列的生成方法。实验结果表明:与均匀线性阵列(Uniform linear array,ULA)配置的MIMO雷达相比,非均匀线性阵列MIMO雷达能够利用较少的物理天线阵元获得相同的参数可辨识性能;而在两种配置的雷达系统的物理阵元个数相同的情况下,非均匀线性阵列MIMO雷达可以获得更大的阵列孔径长度和更低的克拉美.罗界。     

基于FFT的抑制载波捕获技术

介绍三种基于快速傅里叶变换(FFT)的开环抑制载波捕获技术,并对这些算法进行性能分析及仿真.结果表明,基于FFT的交错符号积分技术,在低符号信噪比时引入的信噪比损失最小,适用于深空接收机中抑制载波捕获.     

预警机作战使用初探

预警机具有巨大的战争价值，对预警机的种类和装备的国家进行了介绍，用战例对预警机的战略预警任务、战术使用和其它用途进行了分析，尤其是在几场局部战争中预警机的应用。最后对预警机的发展简单阐述了看法。