Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

High speed driving of a gain-switched laser diode with anexponential transmission line

With the increase of information capacity of an airborne system, high speed driving of laser diodes have been of interest. In order to match the low resistive LD, proposed in this paper is an exponential transmission line, which is used as preshaping to compensate the pattern effect in gain switching of laser diodes. It also will be used to overcome the effect of parasitic elements in high speed driving to improve the rise and trail edges of the output waveform. An accurate circuit model of the exponential line for the PSPICE program has been developed and simulations are conveniently carried out by employing PSPICE     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

侧链含硝基氮杂基团的聚醚粘合剂的性能及应用──新型硝基粘合剂研究Ⅲ

对新型的侧链含硝基氨杂基因的富能聚醚粘合剂──端羟基２─甲硝胺基乙基缩水甘油醚均聚醚（ＮＰＥ—Ａ）和端羟基共聚醚（ＮＰＥ—Ｂ）的性能进行了研究。结果表明，ＮＰＥ的热稳定性和化学稳定性良好，优于普通碳氢聚醚粘合剂（ＨＣＰＥ）和新型氟碳聚醚粘合剂（ＦＣＰＥ）；其固化后的力学性能良好。简要地叙述了以ＮＰＥ—Ｂ为粘合剂的固体火箭推进剂的配方和性能。     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

疲劳裂纹扩展速率试验数据的可靠性分析模型

以指定ΔＫ下的ｄａ／ｄＮ服从对数正态分布为基础，提出３种ｄａ／ｄＮ试验数据统计处理方法；依据一组４０ＣｒＮｉＭｏ材料的ＣＴ试样的试验数据处理结果，对３方法进行了分析对比。     

纯辐射换热航天器系统比缩热负载试验方法

首先讨论了纯辐射换热的航天器系统温度场在恒定热源情况下具有渐近稳定特性，然后据此提出了对该系统可采用比缩热负载进行热模拟试验的方法。     

涡切片图象立体重建

 <正> 1.引言 激光片光技术和流体中微粒的光散射效率逐步提高;从烟雾、水汽到激发诱导荧光使流动可视化程度不断开拓。许多研究工作需要通过观察切片照片获得对复杂流动整体结构的理解。因此,将系列二维切片照片重建成立体图象是十分有意义的。 近年来这方面比较典型的工作有Jimener的平面混合层和Agui and Hesselink的共轴喷流重建,分别在平面型和封闭柱面型的不同气流混合界面研究涡系的生成和发展。用涡迹切片重建的三维图象能清楚地显示涡的内部结构,对提供合理的流动假说和计算模型有重要意义。     

基于图像识别的发动机内窥智能检测系统研究

介绍了一种基于图像识别技术的航空发动机内窥检测的新方法，采用最大类间方差法计算二值化分割的最佳阈值，并将提取的图像特征输入神经网络进行分层识别，最后由专家系统对损伤程度进行了诊断。通过现场测试，证明了该方法的有效性和实用性．