结构/直角切割网格下时域有限体积法在计算电磁中的应用研究

 采用有限体积法直接求解时域麦克斯韦方程组，研究了二维圆柱、翼型和三维球体、立方体、双球体等典型完全导电目标的电磁散射问题。空间离散使用近似黎曼解构建网格通量，并针对二维结构网格、三维自适应直角切割网格分别给出重构方法，时间方向采用二步龙格库塔法。计算与理论、实验或文献结果符合良好。     

动能拦截器助推段导引方案研究

针对大气层外高速飞行的目标, 提出了一种可用于动能拦截器助推段的导引方法.建立了拦截器和目标的运动模型, 在分析可拦截约束条件的基础上推导出转移轨道计算方法, 同时通过对拦截器可发射区域中的转移轨道优化得到满足约束条件的有效发射区域, 并以点火时刻待增速度为性能指标来寻优计算获得发射参数.仿真结果表明, 该方法能有效实现拦截器助推段的制导控制.      

基于CAIV的航空发动机性能与费用的综合权衡模型框架

运用"费用作为独立变量"方法, 对航空发动机立项论证中的性能与费用的综合权衡与决策方法进行了研究.首先建立了航空发动机总拥有费用的参数估算模型, 研究了发动机主要性能参数与其主要设计参数之间的关系并建立了性能模型.然后研究了如何确定设计参数的约束条件即"权衡空间".最后将以上研究成果进行了综合, 建立了发动机性能与总拥有费用的综合权衡模型框架, 可用于发动机的设计参数与费用的决策.      

面向制造业的逆向供应链中的产品回收

针对制造业中产品回收的问题,在分析逆向供应链特点的基础上,讨论了逆向供应链中的产品回收过程、产品回收网络和产品回收的难点,为进一步定量分析产品回收网络奠定了基础.     

基于干扰观测器的高超声速飞行器预测控制器设计简

 针对具有强耦合特性与模型不确定性特点的高超声飞行器控制问题,提出一种新型的姿态预测控制器设计方法。引入参考模型,建立了飞行器姿态预测控制模型。基于此,利用预测理论设计了飞行器的预测控制器,同时设计了干扰观测器实时观测外界未知干扰来进行补偿控制,从而实现滚动优化的目的;基于干扰观测值与真值的误差,利用Lyapunov稳定性理论,确定了控制精度与预测步长大小的关系;最后,在参数标称与拉偏的情形下进行了高超声速飞行器姿态控制系统仿真,仿真结果表明,干扰观测器能快速跟踪干扰,并且所设计的预测步长可以满足飞行器高精度的控制要求。     

基于关键结构特征的升力风扇结构布局方案设计

为研究升力风扇的结构布局,并探索1种新结构布局方案设计方法,归纳了4项升力风扇结构布局的特别设计需求,由此引出4个方面关键结构特征,并基于结构特征的组合设计了多种各具特点的结构布局方案,最终通过多方案对比分析,从中选定双承力机匣对转无静叶方案。设计结果表明:采用关键结构特征组合的方法有助于布局方案的创新设计,并能够形成系列化方案,从而为创新型项目的风险控制提供方案支持。     

航空发动机叶片高频模态阻尼的实验测试方法

以NASA Rotor37叶片为对象,研究了航空发动机叶片的高频模态阻尼比的实验测试方法.实验分析和数值计算均说明:在随机声激励下获得频响曲线将包含由支撑结构振动造成的峰值.基于此提出在支撑结构上布置多个传感器的实验方案,并以支撑结构的振动峰值位置和能量相对大小来判定叶片振动主导的振动峰值.用小波阈值收缩法和曲线拟合法对这些振动峰值进行了降噪和模态阻尼比识别,给出了实测模型在10kHz内“叶片主导振动”的模态阻尼比.结果表明:一般的结构金属材料条件下,叶片结构的高频模态阻尼比的数量级小于1%,且随频率增加呈下降趋势.      

Design and experimental study of a micro-groove grinding wheel with spray cooling effect

The effectiveness of grinding fluid supply has a crucial impact on grinding quality and efficiency in high speed grinding. In order to improve the cooling and lubrication, through in-depth research of self-inhaling internal cooling method and intermittent grinding mechanism, a new spray cooling method used in high speed grinding is proposed. By referring to the structure of bowl- shaped dispersion disk, the grinding wheel matrix with atomization ability is designed; through studying heat transfer of droplet collision and the influence of micro-groove on the boiling heat transfer, grinding segment with micro-groove is designed to enhance the heat flux of coolant and achieve maximum heat transfer between droplets and grinding contact zone. High-speed grinding experiments on GH4169 with the developed grinding wheel are carried out. The results show that with the micro-groove grinding wheel just 5.4% of pump outlet flow rate and 0.5% of spindle energy is needed to reduce the grinding temperature to 200℃, which means the developed grinding wheel makes cooling high efficient and low energy consuming.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

Dynamic analysis of C/C composite finger seal

A seal device as an important component of aeroengines has decisive influence on per- formance, reliability, and working life of aeroengines. With the development of aeroengines, demands on the performance characteristics of seal devices are made strictly. Finger seal as a novel kind of sealing device, recently attracts more and more attentions in academic circles and engineer- ing fields at home and abroad. Research on finger seals has been extensively developed, especially on leakage and wear performances under dynamic conditions. However, it is a pity that the work on finger seals has been limited with a single approach that is improving the performance by structural optimization; in addition, the technology of dynamic analysis on finger seals is weak. Aiming at the problems mentioned above, a distributed mass equivalent dynamic model of finger seals considering the coupling effect of overlaid laminates is established in the present paper, the dynamic perfor- mance of 2.5 dimension C/C composite finger seal is analyzed with the model, and then the effects of fiber bundle density and fiber bundle preparation direction on finger seal＇s dynamic performance are discussed, as well as compared with those of Co-based alloy finger seal. The current work is about dynamic analysis of finger seals and application of C/C composite in this paper may have much academic significance and many engineering values for improving research level of finger seal dynamics and exploring feasibility of C/C composite being used for finger seals.