A three-dimensional plasma and energetic particle investigation for the wind spacecraft

This instrument is designed to make measurements of the full three-dimensional distribution of suprathermal electrons and ions from solar wind plasma to low energy cosmic rays, with high sensitivity, wide dynamic range, good energy and angular resolution, and high time resolution. The primary scientific goals are to explore the suprathermal particle population between the solar wind and low energy cosmic rays, to study particle accleration and transport and wave-particle interactions, and to monitor particle input to and output from the Earth's magnetosphere.Three arrays, each consisting of a pair of double-ended semi-conductor telescopes each with two or three closely sandwiched passivated ion implanted silicon detectors, measure electrons and ions above 20 keV. One side of each telescope is covered with a thin foil which absorbs ions below 400 keV, while on the other side the incoming <400 keV electrons are swept away by a magnet so electrons and ions are cleanly separated. Higher energy electrons (up to 1 MeV) and ions (up to 11 MeV) are identified by the two double-ended telescopes which have a third detector. The telescopes provide energy resolution of E/E0.3 and angular resolution of 22.5°×36°, and full 4 steradian coverage in one spin (3 s).Top-hat symmetrical spherical section electrostatic analyzers with microchannel plate detectors are used to measure ions and electrons from 3 eV to 30 keV. All these analyzers have either 180° or 360° fields of view in a plane, E/E0.2, and angular resolution varying from 5.6° (near the ecliptic) to 22.5°. Full 4 steradian coverage can be obtained in one-half or one spin. A large and a small geometric factor analyzer measure ions over the wide flux range from quiet-time suprathermal levels to intense solar wind fluxes. Similarly two analyzers are used to cover the wide range of electron fluxes. Moments of the electron and ion distributions are computed on board.In addition, a Fast Particle Correlator combines electron data from the high sensitivity electron analyzer with plasma wave data from the WAVE experiment (Bougeretet al., in this volume) to study wave-particle interactions on fast time scales. The large geometric factor electron analyzer has electrostatic deflectors to steer the field of view and follow the magnetic field to enhance the correlation measurements.     

铸造SiCp／ZL101复合材料的组织与性能

本文利用半固态搅拌铸造法制备了ＳｉＣｐ／ＺＬ１０１复合材料，对其组织和某些性能进行了研究，结果表明：ＳｉＣｐ在基体中分布均匀，无严重团聚现象，与基体结合良好，与基体合金相比，耐磨性，硬度有显著提高。     

空中受油管的绕流特性研究

空中加油是提高飞机航程、活动半径的重要方法。通过对四种固定受油管的数值模拟,从流动特性的改进方面说明了合适的截面及倾角会降低受油管绕流的压力脉动,进而使噪声降低。     

直升机滑油换热器的结构优化设计

在直升机肋管式滑油换热器的初步热力性能设计计算基础上,应用数值优化原理,对滑油换热器结构的优化设计进行了研究,建立了结构优化程序.该程序以滑油换热器的重量为目标函数,采用正弦法去约束并结合单纯形加速法寻优.实例计算表明,将滑油换热器的热力性能计算程序同结构优化程序结合起来,可以建立自动匹配的换热器设计及优化程序系统.应用该软件,输入设计要求,就可获得既满足性能要求,且重量最轻的肋管式滑油换热器.该软件可推广应用于各种类型肋管式换热器.     

瞬态气动模拟加热控制中的快速高精度"E-T"转换

为了准确模拟飞行器在高速飞行时的瞬态气动加热状态,必须使用快速、高精度的计算机瞬态热能控制系统,对气动模拟试验的加热过程,实行快速、高精度的非线性动态控制.为此,传感器的快速、高精度"E-T"转换是一个必须解决的非常重要的问题.提出一种高速飞行器瞬态气动加热控制系统中传感器的快速、高精度"E-T"转换方法.该方法具有计算简单、转换速度快、校正精度高的优点,使用该方法实现了高速飞行器气动加热过程中温度场高速变化状态下的瞬态非线性动态控制.     

快速预热型铷原子振荡器的研制

介绍了一种快速预热型铷原子振荡器的设计方法和试验数据 ,3 5min的锁定时间、0 4 5L的小巧体积和良好的频率重现性能 ,非常适合于战术应用。     

双脉冲瞬态散斑全场测量方法研究CSCD

散斑测量技术在瞬态振动过程测量中具有不可或缺的重要地位。提出双脉冲瞬态散斑全场测量技术，解决了双脉冲激光器与双曝光相机的时序同步的关键技术，设计了基于双脉冲激光器的瞬态散斑光路系统，搭建了双脉冲瞬态散斑全场测量系统，从而实现了（2~800）μs 时间间隔内连续可调的瞬时振动形貌的测量。     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

基于自适应径向基网络的舰船RCS统计特征识别方法

文章采用舰船RCS频域起伏序列的均值、标准差为识别特征向量,利用提出的基于样本密度的自适应径向基网络,进行舰船分类识别研究。自适应径向基网络采用改进的自适应PSO方法估计样本密度最优邻域半径,实现径向基网络中心的自适应选择。改进的自适应PSO方法采用能反映样本聚类特点的BWP指标为适应度评价函数,采用快慢结合的高斯自适应惯性权重调节策略,提高了最优样本密度邻域半径的搜索速度和精度。实验结果表明,自适应径向基网络能自适应获得径向基网络最优识别率对应的RBF中心及其位置分布,减少了对建模人员经验的依赖,提高了反舰导弹对舰船类型的识别分类能力。     

基于可靠性寿命分布的元件库存确定方法

合理地确定元件库存周期对提高库存经济性和保证元件可靠性具有重要意义。根据航空结构元件可靠性符合浴盆曲线分布、Weibull分布、线性递增分布和指数分布的情况,提出了结构元件可靠度分析的方法,根据飞机运行数据拟合结构元件可靠度分布,根据其可靠性分布可确定元件失效时间,再由失效时间确定元件库存周期。针对飞机滑轨中的结构元件进行了算例分析,其可靠性服从威布尔分布,符合元件运行实际情况,由此确定的库存周期与实际需求相符,算例分析表明,提出的方法合理,为确定元件库存周期提供了一个合理可行的方法。