激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

多普勒雷达导引头信号处理技术

概述防空导弹多普勒雷达导引头信号的基本形式、主要特点、检测原理及其滤波系统；介绍了多普勒雷达导引头信号处理的一些常用技术。     

通用仪器CAT可视软件开发平台

通用仪器CAT可视软件开发平台(以下简称"CAT"平台),是在深入研究各个校准实验室日常计量检测工作普遍规律的基础上,设计出的一套辅助实验室软件开发与应用的通用工具,可以完成检测软件开发与应用、证书编辑与生成、实验室信息管理等工作,全面提高校准实验室检定测试的技术与管理水平.     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

实时曲面纹理及其光照效果的生成

依据两步映射法和体纹理的思想，将曲面纹理的映射过程分为非实时映射和实时查询两个部分，提出一种能实时显示曲面纹理的方法及相应的抗混叠措施，最后，结合一种快速浓淡算法，为曲面纹理叠加光照效果，生成了很逼真的图象。     

基于对象的仿真建模系统

基于面向对象的思想，图形用户界面和仿真程序自动生成技术研制开发出一个基于对象的辅助仿真建模系统ＳｉｍＭｏｄｅｌ，介绍了ＳｉｍＭｏｄｅｌ的系统结构和模型描述框架，讨论了仿真程序生成器的运行机制，提出了有向网络图递归深广优先搜索算法。     

离散系统仿真输出数据的统计分析

概括了分析仿真产生的数据的方法，讨论了离散系统仿真输出分析的目的以及应用统计方法的要求，对单变量情形，给出了有关估计来自终态仿真和和稳态仿真参数的技术。对多变量情形，以终态仿真为例，给出了用于分析离散系统的仿真输出的某些多变量统计技术，并提出均值向量的估计方法。     

脉冲信号稳幅方法研究

主要介绍了连续波信号稳幅方法及脉冲信号稳幅方法,并根据对反馈控制电路的分析和电路仿真方法,进行了脉冲稳幅电路设计,最后给出了实验数据。