Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

Energetic ion emission for active spacecraft control

Future space missions aiming at the accurate measurement of cold plasmas and DC to very low frequency electric fields will require that the potential of their conductive surfaces be actively controlled to be near the ambient plasma potential. In the near-Earth space these spacecraft are usually solar-cell powered; consequently, parts of their surface are most of the time exposed to solar photons. Outside the plasmasphere, a positive surface potential due the dominance of surface-emitted photoelectrons over ambient plasma electrons is to be expected. Photo- and ambient electrons largely determine the potential and positive values between a few Volts up to 100 V have been observed. Active ion emission is the obvious solution of this problem. A liquid metal ion emitter and a saddle field ion emitter are nearing the stage of flight unit fabrication. We will attempt to clamp the spacecraft potential to values close to the plasma potential. We present first results from vacuum chamber tests and describe the emission behaviour and characteristics of emitters producing, respectively, In⁺ and N₂⁺ beams with an energy of ≥ 5 keV.     

Thymine photoproduct formation and inactivation of intact spores of Bacillus subtilis irradiated with short wavelength UV (200-300nm) at atmospheric pressure and in vacuo.

Vacuum exposure renders the survival of spores of Bacillus subtilis approximately five times more sensitive to ultraviolet light irradiation than exposure under atmospheric conditions. The photoproduct formation in spores irradiated under ultrahigh vacuum (UHV) conditions is compared to the photoproduct formation in spores irradiated at atmospheric pressure. Compared to irradiation at atmospheric pressure, where only the "spore photoproduct" 5-thyminyl-5,6-dihydrothymine (TDHT) can be detected, two additional photoproducts, known as the c,s and t,s isomers of thymine dimer (T<>T) are produced in vacuo. The spectral efficiencies for photoproduct formation in spores under atmospheric and vacuum conditions are compared. Since there is no increased formation of TDHT after irradiation in vacuum, TDHT cannot be made responsible for the observed vacuum effect. "Vacuum specific" photoproducts may cause a synergistic response of spores to the simultaneous action of ultraviolet light (UV) and UHV. Three different mechanisms are discussed for the enhanced sensitivity of B. subtilis spores to UV radiation in vacuum. The experiments described contribute valuable research information on the chance for survival of microorganisms in outer space.     

Occurrence of equatorial plasma bubbles over Kolhapur

This paper reports the nightglow observations of OI 630.0 nm emissions, made by using all sky imager operating at low latitude station Kolhapur (16.8°N, 74.2°E and dip lat. 10.6°N) during high sunspot number years of 24th solar cycle. The images are analyzed to study the nocturnal, seasonal and solar activity dependence occurrence of plasma bubbles. We observed EPBs in images regularly during a limited period 19:30 to 02:30 LT and reach maximum probability of occurrence at 22:30 LT. The observation pattern of EPBs shows nearly no occurrence during the month of May and it maximizes during the period October–April. The equinox and solstice seasonal variations in the occurrence of plasma bubbles show nearly equal and large differences, respectively, between years of 2010–11 and 2011–12.     

WIND/3DP and Nancay radioheliographobservations of solar energetic electron events

Initial results of a combined study of electron events using the 3DP experiment on the WIND spacecraftand the Nançay Radioheliograph (NRH) are presented. A total of 57 electron events whose solar release time could be inferred from WIND/3DP observations occurred during NRH observing times. In 40 of them a distinct signature was detected in maps at decimetric and metric wavelengths (dm-m-λ) taken by the NRH. These events are equally distributed among two categories: (1) Electron release together with dm-m-λ bursts of a few minutes duration: these events are also accompanied by decametric-hectometric type III bursts seen by WAVES/WIND. They correspond to the well-known impulsive electron events. (2) Electron release during long duration (several tens of minutes) dm-m-λ emission: the electrons are most often released more than ten minutes after the start of the radio event. In the majority of cases the dm-m-λ radio source changes position, size, and/or intensity near the time of electron release.     

High resolution time profile of decimetric type-III bursts

Type-III bursts are signatures of the electron beams accelerated during the solar flares, their observation and investigation provide information of the acceleration processes, the characteristics of the exciting agent and the acceleration site. The Brazilian Solar Spectroscope (BSS), in operation at INPE, Brazil, have recorded type-III radio bursts in decimetric range (2050–2250 MHz) with high time resolution of 20 ms. Decimetric reverse drift bursts are possibly generated in a dense loop by electron beams travelling towards the photosphere. Hence their time profiles should carry signatures of the density inhomogenities in the loop. Here the temporal and spectral characteristics of decimetric type-III bursts are presented.