VLF Loop Antennas for Pulse Reception

This paper describes an approach to the realization of a VLF loop-type antenna system. The theoretical analysis is applied to a four-loop system for Loran-C reception.     

Application of a Highly Parallel Processor to Radar Data Processing

The application of a highly parallel computer known as PEPE (Parallel Element Processing Ensemble) to radar data processing is described. The PEPE computer consists of a large number of identical processing elements which operate in parallel and are controlled by a common control unit. Each of the processing elements is assigned to a particular radar target such that many targets can be tracked in parallel. PEPE is designed to augment a conventional computer rather than to stand alone. The total data processing load associated with a radar tracking system is distributed between PEPE and the sequential machine in a manner than maximizes the overall system efficiency and desensitizes the system performance to fluctuations in traffic levels. The use of PEPE provides very high data processing throughput potential to a radar data processing system.     

Automatic Light Control Electro-Optical CCDTV Systems

For electro-optical TV systems, a simplified method of analysis has been developed for an automatic light control (ALC) loop preliminary ary design and performance trade-offs. With iris and shutter control mechanization incorporated, not only does the input light range increase, but the video response overshoot and settling time are reduced as well. This study shows that the appealing notion of heavily damped response is not often true, particularly in the realtime ime airto-ground surveillance of targets with varying backgrounds. In addition, with exponential and geometric feedback functions introduced, the resultant ALC dynamics are independent of the input light level. To verify the assumptions made and to demonstrate the feasibility of a working model, a complete system simulation is performed.     

On detection using filter banks and higher order statistics

We suggest a method, based on the use of filter bank and higher order statistics (cumulants), for detection of transient signals. The method first uses a bandpass filter bank, which separates the spectrum of the observed signal into narrow frequency bands. Each subfilter of the filter bank is then followed by a cumulant estimator, and thereby suppressing colored noise. By selecting those subfilters that have large output energies, the filter bank can approximate the behavior of a matched filter. Moreover, no a priori information about the waveform of the signal is needed. The performance of the detector is evaluated by using a simulated signal as well as a measured signal. The presented detector is compared with the optimal matched filter detector.     

Review of numerical simulations for high-speed, turbulent cavity flows

High speed flows inside cavities are encountered in many aerospace applications including weapon bays of combat aircraft as well as landing gear. The flow field inside these cavities is associated with strong acoustic effects, unsteadiness and turbulence. With increasing emphasis on stealth operation of unmanned combat air vehicles and noise concerns near airports, cavity flows attracted the interest of many researchers in aerodynamics and aeroacoustics. Several attempts were made using wind tunnel experimentation and computational fluid dynamics analyses to understand the complex flow physics associated with cavity flows and alleviate their adverse effects via flow control. The problem proved to be complex, and current research revealed a very complex flow with several flow phenomena taking place. With the aid of experiments, CFD methods were validated and then used for simulations of several cavity configurations. The detached-eddy and large-eddy simulation methods proved invaluable for these studies and their application highlights the need for advanced turbulence simulation techniques in aerospace. The success of these methods and a summary of the current status of the experimental and computational progress over the past twenty years is summarised in this paper.     

Analysis of the effect of various disturbing factors on high-precision forecasts of spacecraft orbits

The necessity of taking many force components disturbing spacecraft (SC) orbits into account is demonstrated for the example of forecasts of GLONASS ephemerides. The disturbances of SCs in high-earth orbits (HEO) and low-earth orbits (LEO) are systematized, and the degree of their effect on SC motion is estimated. Disturbance models are developed that provide essential increases of the accuracy of one-day forecasts of GLONASS and GPS ephemerides. Modeling results are presented that allow, depending on the required accuracy of SC orbit forecasts, the determination of the necessary list of disturbances included in the model.     

A Clutter Reduction Technique for Random Signal Radars

The performance of certain radars is degraded in environments with significant clutter returns, and since the clutter is signal-generated, increasing the transmitted power does not improve the situation. However, changing the pulse width and pulse period of the transmitted signal can increase the input signal-to-interference ratio. In this correspondence, the transmitted signal is made up of pulses of random waveforms and the receiver is a correlator where the reference signal extends over many pulses. An expression for input signal-to-interference ratio as a function of pulse width and period is obtained for the case of a distributed target. This expression could be maximized by any of several methods, but to further elucidate the clutter reduction technique, contour plots of the input signal-to-interference ratio are presented.     

Interstellar Mapping and Acceleration Probe (IMAP): A New NASA Mission

The Interstellar Mapping and Acceleration Probe (IMAP) is a revolutionary mission that simultaneously investigates two of the most important overarching issues in Heliophysics today: the acceleration of energetic particles and interaction of the solar wind with the local interstellar medium. While seemingly disparate, these are intimately coupled because particles accelerated in the inner heliosphere play critical roles in the outer heliospheric interaction. Selected by NASA in 2018, IMAP is planned to launch in 2024. The IMAP spacecraft is a simple sun-pointed spinner in orbit about the Sun-Earth L1 point. IMAP’s ten instruments provide a complete and synergistic set of observations to simultaneously dissect the particle injection and acceleration processes at 1 AU while remotely probing the global heliospheric interaction and its response to particle populations generated by these processes. In situ at 1 AU, IMAP provides detailed observations of solar wind electrons and ions; suprathermal, pickup, and energetic ions; and the interplanetary magnetic field. For the outer heliosphere interaction, IMAP provides advanced global observations of the remote plasma and energetic ions over a broad energy range via energetic neutral atom imaging, and precise observations of interstellar neutral atoms penetrating the heliosphere. Complementary observations of interstellar dust and the ultraviolet glow of interstellar neutrals further deepen the physical understanding from IMAP. IMAP also continuously broadcasts vital real-time space weather observations. Finally, IMAP engages the broader Heliophysics community through a variety of innovative opportunities. This paper summarizes the IMAP mission at the start of Phase A development.     

Temperature effects in the ATIC BGO calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had a successful test flight and a science flight in 2000–01 and 2002–03 and an unsuccessful launch in 2005–06 from McMurdo, Antarctica, returning 16 and 19 days of flight data. ATIC is designed to measure the spectra of cosmic rays (protons to iron). The instrument is composed of a Silicon matrix detector followed by a carbon target interleaved with scintillator tracking layers and a segmented BGO calorimeter composed of 320 individual crystals totaling 18 radiation lengths to determine the particle energy. BGO (Bismuth Germanate) is an inorganic scintillation crystal and its light output depends not only on the energy deposited by particles but also on the temperature of the crystal. The temperature of balloon instruments during flight is not constant due to sun angle variations as well as differences in albedo from the ground. The change in output for a given energy deposit in the crystals in response to temperature variations was determined.