Radio plasma imager simulations and measurements

The Radio Plasma Imager (RPI) will be the first-of-its kind instrument designed to use radio wave sounding techniques to perform repetitive remote sensing measurements of electron number density (N _e) structures and the dynamics of the magnetosphere and plasmasphere. RPI will fly on the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission to be launched early in the year 2000. The design of the RPI is based on recent advances in radio transmitter and receiver design and modern digital processing techniques perfected for ground-based ionospheric sounding over the last two decades. Free-space electromagnetic waves transmitted by the RPI located in the low-density magnetospheric cavity will be reflected at distant plasma cutoffs. The location and characteristics of the plasma at those remote reflection points can then be derived from measurements of the echo amplitude, phase, delay time, frequency, polarization, Doppler shift, and echo direction. The 500 m tip-to-tip X and Y (spin plane) antennas and 20 m Z axis antenna on RPI will be used to measures echoes coming from distances of several R _E. RPI will operate at frequencies between 3 kHz to 3 MHz and will provide quantitative N _e values from 10^–1 to 10⁵ cm^–3. Ray tracing calculations, combined with specific radio imager instrument characteristics, enables simulations of RPI measurements. These simulations have been performed throughout an IMAGE orbit and under different model magnetospheric conditions. They dramatically show that radio sounding can be used quite successfully to measure a wealth of magnetospheric phenomena such as magnetopause boundary motions and plasmapause dynamics. The radio imaging technique will provide a truly exciting opportunity to study global magnetospheric dynamics in a way that was never before possible.     

Solar sail trajectories with piecewise-constant steering laws

Solar sails have much attracted the interest of the scientific community as an advanced low-thrust propulsion means capable of promoting the reduction of mission costs and the feasibility of missions that are not practically accessible via conventional propulsion because of their large ΔV requirements. To reduce the overall flight time, a given mission is usually analyzed in the framework of a minimum time control problem, with the employment of a continuous steering law. The aim of this paper is to investigate the performance achievable with a piecewise-constant steering law whose aim is to substantially reduce the complex task of reorienting the sail over the whole mission. Unlike previous studies based on direct approaches, here we use an indirect method to optimally select the sail angle within a set of prescribed values. The corresponding steering law translates the results available for continuous controls to the discrete case, and is able of producing trajectories that are competitive in performance with the optimum variable direction program.     

Heat transfer at various methods of thermal protection in the systems of power-driven gas turbine plants (GTP)

The scheme variants of implementing the thermal protection against heat flows being generated by the body of a high-temperature stationary gas turbine engine (GTE) are presented. The scheme of the experimental bench with a working section is given. Methodical approaches to the heat transfer calculation at different variants of forced and natural convection organization and under various operating conditions are described. The generalized results of the experiments carried out using a heat curtain being generated by porous injection are presented.     

Structure of a two-phase flow of boiling water at low-head adiabatic efflux through the laval nozzle

The critical flow conditions and structural forms of a two-phase flow that is formed during water efflux from the region of moderate and low pressures into a rarefied medium are analyzed. The difference in the structural forms of a flow realized at the low-head efflux from the structure of a flow occurring in the fluid flow with moderate and high initial pressures is established. The critical pressure differential characterizing the establishment of the maximum flowrate is determined and the decisive influence of turbulence on the vapor phase generation and flow conditions of a two-phase medium is shown.     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

RPC-MAG The Fluxgate Magnetometer in the ROSETTA Plasma Consortium

The fluxgate magnetometer experiment onboard the ROSETTA spacecraft aims to measure the magnetic field in the interaction region of the solar wind plasma with comet 67P/Churyumov-Gerasimenko. It consists of a system of two ultra light (about 28 g each ) triaxial fluxgate magnetometer sensors, mounted on the 1.5 m long spacecraft boom. The measurement range of each sensor is ±16384 nT with quantization steps of 31 pT. The magnetometer sensors are operated with a time resolution of up to 0.05 s, corresponding to a bandwidth of 0–10 Hz. This performance of the RPC-MAG sensors allows detailed analyses of magnetic field variations in the cometary environment. RPC-MAG furthermore is designed to study possible remnant magnetic fields of the nucleus, measurements which will be done in close cooperation with the ROSETTA lander magnetometer experiment ROMAP.     

Wave resistance of rough plane channel walls in the supersonic flow

We propose a method that makes it possible to obtain in the framework of linear approximation the exact formulas for the wave resistance of the channel walls with an arbitrary plane pattern in the first and subsequent interference zones. It is shown by a particular example of the sinusoidal pattern that the pressure wave interference may lead to the positive or negative resistance resonance.     

Spectroscopic Measurement of Coronal Compositions

Although the elemental composition in all parts of the solar photosphere appears to be the same this is clearly not the case with the solar upper atmosphere (SUA). Spectroscopic studies show that in the corona elemental composition along solar equatorial regions is usually different from polar regions; composition in quiet Sun regions is often different from coronal hole and active region compositions and the transition region composition is frequently different from the coronal composition along the same line of sight. In the following two issues are discussed. The first involves abundance ratios between the high-FIP O and Ne and the low-FIP Mg and Fe that are important for meaningful comparisons between photospheric and SUA compositions and the second involves a review of composition and time variability of SUA plasmas at heights of 1.0≤h≤1.5R _⊙.     

The finite element approximation of vector fields in curvilinear coordinates

We demonstrate that it is possible to express each component of the displacement vector for the interior point of the finite element (FE) through all components of nodal unknowns in curvilinear coordinates. The effectiveness of the valid technique of vector approximation for displacement fields has been verified on an example.     

Simple adaptive control for aircraft control surface failures

This work extends the so-called simple adaptive control approach to direct model reference adaptive control of multi-input multi-output systems to include loss of control effectiveness failures. It is proven that all signals are bounded for loss of control effectiveness failures during a bounded input disturbance. A state space approach is introduced for computing the feedforward compensator that is required by the stability result. The adaptive algorithm is applied to a three input model of the linearized lateral dynamics of the F/A-18 aircraft. Simulation results are obtained with single, double, and triple control effectiveness failures of 88% during the occurrence of a lateral gust. These results show that the adaptive controller exhibits improved model following as compared with a fixed gain eigenstructure assignment controller.