Measurements of electrical breakdown in the vicinity of a sounding rocket differentially charged to 10 kV

During the initial period of high voltage biasing of the SPEAR-3 sounding rocket payload, it was observed that electrical breakdown occurred in the gas surrounding the rocket. The breakdown occurred almost all the way to apogee of 289 km on the upleg, but did not recur on the downleg until the payload reached an altitude of 100 km. It is suggested that this behavior can be attributed to payload outgassing on the upleg leading to abnormally high gas pressure near the payload skin. Consideration of a modified Paschen discharge process with varying pressure along the discharge path was found to be consistent with the results.     

Radiation measurements aboard NASA ER-2 high altitude aircraft with the Liulin-4J portable spectrometer.

The risks to aircrew health posed by prolonged exposure to low levels of ionizing radiation at aircraft altitudes have recently received renewed attention. Civil and military aircraft currently on the drawing board are expected to operate at higher altitudes (>12 km) and fly longer ranges than do existing aircraft, thereby exposing their crews to higher levels of ionizing radiation, for longer periods of time. We are currently carrying out dosimetric measurements of the ionizing radiation environment at approximately 20 km altitude using portable Si detectors aboard NASA's two ER-2 high altitude research aircraft. The instruments, Liulin-4J, have been extensively calibrated at several particle accelerators. With these instruments, we can measure not only absorbed dose, but also variation of the absorbed dose as a function of time. We report radiation dose measurements as function of time, altitude, and latitude for several ER-2 missions.     

High resolution time profile of decimetric type-III bursts

Type-III bursts are signatures of the electron beams accelerated during the solar flares, their observation and investigation provide information of the acceleration processes, the characteristics of the exciting agent and the acceleration site. The Brazilian Solar Spectroscope (BSS), in operation at INPE, Brazil, have recorded type-III radio bursts in decimetric range (2050–2250 MHz) with high time resolution of 20 ms. Decimetric reverse drift bursts are possibly generated in a dense loop by electron beams travelling towards the photosphere. Hence their time profiles should carry signatures of the density inhomogenities in the loop. Here the temporal and spectral characteristics of decimetric type-III bursts are presented.     

Atmospheric dynamics in the "Laboratory Biosphere" with wheat and sweet potato crops.

Laboratory Biosphere is a 40-m3 closed life system equipped with 12,000 W of high pressure sodium lamps over planting beds with 5.37 m2 of soil. Atmospheric composition changes due to photosynthetic fixation of carbon dioxide and corresponding production of oxygen or the reverse, respiration, are observed in short timeframes, e.g., hourly. To focus on inherent characteristics of the crop as distinct from its area or the volume of the chamber, we report fixation and respiration rates in mmol h-1 m-2 of planted area. An 85-day crop of USU Apogee wheat under a 16-h lighted/8-h dark regime peaked in fixation rate at about 100 mmol h-1 m-2 approximately 24 days after planting. Light intensity was about 840 micromoles m-2 s-1. Dark respiration peaked at about 31 mmol h-1 m-2 at the same time. Thereafter, both fixation and respiration declined toward zero as harvest time approached. A residual soil respiration rate of about 1.9 mmol h-1 m-2 was observed in the dark closed chamber for 100 days after the harvest. A 126-day crop of Tuskegee TU-82-155 sweet potato behaved quite differently. Under a 680 micromoles m-2 s-1, 18-h lighted/6-h dark regime, fixation during lighted hours rose to a plateau ranging from about 27 to 48 mmol h-1 m-2 after 42 days and dark respiration settled into a range of 12-23 mmol h-1 m-2. These rates continued unabated until the harvest at 126 days, suggesting that tuber biomass production might have continued at about the same rate for some time beyond the harvest time that was exercised in this experiment. In both experiments CO2 levels were allowed to range widely from a few hundred to about 3000 ppm, which permitted observation of fixation rates both at varying CO2 concentrations and at each number of days after planting. This enables plotting the fixation rate as a function of both variables. Understanding the atmospheric dynamics of individual crops will be essential for design and atmospheric management of more complex CELSS which integrate the simultaneous growth of several crops as in a sustainable remote life support system.     

Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

Electric Polarization of Low-Orbit Spacecraft

The main problems concerning the electric polarization of low-orbit spacecraft are considered, including the results of studying the structure of the Earth's upper ionosphere, the methods of calculating the electrophysical characteristics of construction materials for spacecraft, and the elaboration of recommendations to mitigate the negative effects due to processes of charging and discharging.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

3D Coronal structures and their evolutions measured by Stereoscopy,consequences for Space Weather and the STEREO mission

We are discussing methods of stereoscopic 3D reconstruction of coronal loops structures. In our most sophisticated method we fit loops observed with SOHO/EIT to a set of shape parameters including the internal twist of the loops field lines. We define this twist as the number of turns of the field line around a torus axis between the footpoints of the loops. Twist numbers of the order 0–2 are observed. We observe the emergence of an Active Region with twisted loops which detwist as they expand. The same correlation between detwisting and expansion is observed with filaments in relation to CME formations. On longer time scale, loops seem to accumulate twist, perhaps due to differential rotation. Rapid losses of twist temporarily correlate with flares. From our analysis, we expect that the internal twist of coronal structures will play an important role for the space weather forecast. This revised version was published online in August 2006 with corrections to the Cover Date.