Comments with reply, on `A new look at nonseparable syntheticaperture radar processing' by A. Di Cenzo

The commenters point out that the idea using a two-dimensional digital correlation technique to perform synthetic-aperture-radar (SAR) processing, presented as new in the above-titled paper (see ibid., vol.24, p.218-23, May 1988), was described by them as early as 1978 and has since been described by other authors. They discuss some of these earlier studies. The author replies that he was unaware of the earlier work, and that he did not intend to convey the impression that the nonseparable transform domain processor that he presented was the first     

"Signal" search for intelligence in the galactic nucleus with the array of the Lowlands

In August, 1981, the Westerbork Synthesis Radio Telescope was used for 4 h to search for narrowband pulsing radio beacons in the direction of the Galactic Center. By using both the spatial discrimination and temporal stability available to an interferometric measurement, weak intermittent signals can be detected even in the face of the strong, naturally caused radiation from this region. A radio beacon within our bandwidth, centered on the 21 cm neutral hydrogen line, would be recognizable if it had a repetition period between 40 sec and 1/2 h. The rms sensitivity to point sources was approximately 50 mJy/cycle, and the detection limit was 500 mJy/cycle. The limit degrades for pulse widths < 0.02s. No repetitive signals were found. For a swept, narrow-band radio beacon constrained to the Galactic Disk (beamwidth = 0.02 rad), our detection limit corresponds to a transmitter power of 10(11) MW at the Galactic Center.     

基于多目标的二冲程发动机换气过程优化

二冲程航空活塞发动机的换气过程直接影响燃烧效果和发动机性能,以某二冲程航空活塞发动机为例,建立仿真模型,基于动力性能、经济性能、扫气性能进行多目标优化,对扫气道、排气道结构参数的不同组合优化分析。另外,还对不同海拔工况点下（转速为5 600 r/min,100%节气门开度）的气道结构参数进行优化。结论表明:使用NSGA-Ⅱ算法对发动机气道结构的优化可以有效提高扫气效率和功率,优化后（转速为5 600 r/min）分别为0.841 kW和2.712 kW,燃油消耗率降低22.08 ;另外,在不同海拔工况点中,随着海拔高度的增加扫气道长度呈现出减短的趋势,而排气道长度逐渐增加,且在海拔高度大于1 800 m时趋势变化更加明显。      

航空发动机工作分解结构（WBS）构建方法

针对航空发动机研发项目技术高、周期长、投入大的特点,提出了1种面向全生命周期产品研制的航空发动机工作分解结构构建方法。该方法依据系统工程的理念,充分考虑了航空发动机研究所的管理模式特点,给出了航空发动机工作分解结构的构建原则、架构、工作类型和单元说明等相关内容。通过在实际发动机研制项目中的应用,证明该方法合理、有效,提高了工作分解的完整性、合理性,增强了计划管理的可执行性,能够为项目管理提供相应的信息支撑。     

The Lunar Gravity Ranging System for the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Lunar Gravity Ranging System (LGRS) flying on NASA’s Gravity Recovery and Interior Laboratory (GRAIL) mission measures fluctuations in the separation between the two GRAIL orbiters with sensitivity below 0.6 microns/Hz^1/2. GRAIL adapts the mission design and instrumentation from the Gravity Recovery and Climate Experiment (GRACE) to a make a precise gravitational map of Earth’s Moon. Phase measurements of Ka-band carrier signals transmitted between spacecraft with line-of-sight separations between 50 km to 225 km provide the primary observable. Measurements of time offsets between the orbiters, frequency calibrations, and precise orbit determination provided by the Global Positioning System on GRACE are replaced by an S-band time-transfer cross link and Deep Space Network Doppler tracking of an X-band radioscience beacon and the spacecraft telecommunications link. Lack of an atmosphere at the Moon allows use of a single-frequency link and elimination of the accelerometer compared to the GRACE instrumentation. This paper describes the implementation, testing and performance of the instrument complement flown on the two GRAIL orbiters.