Weapons System Open Architecture - a bridge between "embedded" and "off-board"

A demonstration program is described: Weapons System Open Architecture (WSOA) - funded jointly by the Air Force Research Laboratory (AFRL), DARPA, and the Open Systems Joint Task Force (OSJTF). WSOA provides an open systems "bridge" between legacy embedded mission systems and off-board C3I sources and systems. This "bridge" is used to support Internet-like connectivity between command and attack nodes. The foundation of this bridge is the creation of a Common Object Request Broker Architecture (CORBA) layer over Link 16. In addition, application of quality of service techniques and resource management technologies will ensure the timely exchange and processing of mission critical information by both attack and command nodes in even the most time-sensitive situations.     

End-to-End Modeling of the Solar Terrestrial System

Traditionally modeling for space science has concentrated on developing simulations for individual components of the solar terrestrial system. In reality these regions are coupled together. This coupling can be as simple as the driving of the magnetosphere – ionosphere – thermosphere system by the solar wind or as a complicated as the feedback of the ionospheric conductivity and currents on the magnetosphere. As part of the CISM project we are beginning a concentrated effort to compressively model the entire system. This approach includes chains of models. In the first chain physics based numerical models are utilized while in the second chain empirical models are coupled together. The first half of this paper discusses the numerical modeling approach by highlighting the coupling of pairs of regions within the system. In the second section we present results from empirical models which are combined to make long term forecasts of conditions in the geospace environment. It is expected that a validated and reliable forecast model for space weather can be obtained by combining the strongest elements of each chain.     

Radiation measurements aboard NASA ER-2 high altitude aircraft with the Liulin-4J portable spectrometer.

The risks to aircrew health posed by prolonged exposure to low levels of ionizing radiation at aircraft altitudes have recently received renewed attention. Civil and military aircraft currently on the drawing board are expected to operate at higher altitudes (>12 km) and fly longer ranges than do existing aircraft, thereby exposing their crews to higher levels of ionizing radiation, for longer periods of time. We are currently carrying out dosimetric measurements of the ionizing radiation environment at approximately 20 km altitude using portable Si detectors aboard NASA's two ER-2 high altitude research aircraft. The instruments, Liulin-4J, have been extensively calibrated at several particle accelerators. With these instruments, we can measure not only absorbed dose, but also variation of the absorbed dose as a function of time. We report radiation dose measurements as function of time, altitude, and latitude for several ER-2 missions.     

Defense radar development in Australia: 1939 to the present

Defense radar research and development in Australia is today largely, but not exclusively, confined within Australia's Defense Science and Technology Organization, DSTO, and its R&D collaborators in universities. Radar has a long history in Australia, dating back to World War II links with British defense radar development, and radar R&D continues to be an important focus within DSTO. It is impossible, in the context of a brief conference paper, to give other than the broadest-brush picture of Australian radar development over a half-century or more. So the approach taken is necessarily highly selective and focuses specifically on several illustrative development projects, in an attempt to convey the flavor of national radar research priorities, the way they drive R&D and likely future directions. Despite the escalating requirement for a national skills base in defense radar and allied technologies, there are currently legitimate concerns about the robustness of this base. Recruitment of high-caliber researchers into the field of radar and management of radar research careers are issues currently presenting major challenges. A number of initiatives are in place linking DSTO with university research; a recent effort to enhance the stature and visibility of radar research in Australia is the establishment of the Centre of Expertise in Microwave Radar as a joint venture between DSTO and Adelaide University.     

Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

Recycling of inorganic nutrients for hydroponic crop production following incineration of inedible biomass.

The goal of resource recovery in a regenerative life support system is maintenance of product quality to sure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration is all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match the control treatment, and ash only quality formulated with reagent grade chemicals. When nutrient solutions were formulated using only ash following incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in a suppression of crop growth. When the ash is supplemented with reagent grade chemicals to establish the same balance as in the control--growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in similar growth to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.     

Conditions of the Maximum Principle in the Problem of Optimal Control over an Aggregate of Dynamic Systems and Their Application to Solution of the Problems of Optimal Control of Spacecraft Motion

The necessary first-order conditions of strong local optimality (conditions of maximum principle) are considered for the problems of optimal control over a set of dynamic systems. To derive them a method is suggested based on the Lagrange principle of removing constraints in the problems on a conditional extremum in a functional space. An algorithm of conversion from the problem of optimal control of an aggregate of dynamic systems to a multipoint boundary value problem is suggested for a set of systems of ordinary differential equations with the complete set of conditions necessary for its solution. An example of application of the methods and algorithm proposed is considered: the solution of the problem of constructing the trajectories of a spacecraft flight at a constant altitude above a preset area (or above a preset point) of a planet's surface in a vacuum (for a planet with atmosphere beyond the atmosphere). The spacecraft is launched from a certain circular orbit of a planet's satellite. This orbit is to be determined (optimized). Then the satellite is injected to the desired trajectory segment (or desired point) of a flyby above the planet's surface at a specified altitude. After the flyby the satellite is returned to the initial circular orbit. A method is proposed of correct accounting for constraints imposed on overload (mixed restrictions of inequality type) and on the distance from the planet center: extended (nonpointlike) intermediate (phase) restrictions of the equality type.     

Track structure and DNA damage.

Heavy particles like protons or heavier ions are different in their biological efficiency when compared to sparsely ionizing radiation. These differences have been attributed to the different pattern of energy deposition in the track of the particles. In radiobiological models two different approaches are used for the characterization of the radiation quality: the continuous dose distribution of the various track structure models and the separation in small compartments inside the track which are used in microdosimetry. In a recent Monte Carlo calculation using the binary encounter approximation as input for the electron emission process, the radial distribution of the dose is calculated for heavy ions. The result of this calculation is compared to other models and used for a qualitative interpretation of the induction of DNA damage by particles.