一种微波等离子体原子氧模拟装置

介绍了一种新颖的原子氧模拟试验装置。该装置采用了微波电子回旋共振（ｅｌｅｃｔｒｏｎｃｙｃｌｏｔｒｏｎｒｅｓｏｎａｎｃｅ简称“ＥＣＲ”）的先进技术。最佳调试状态下，可获得１０（１５）／（ｃｍ２·ｓ）的束流。在该试验装置上，对航天器上常用的Ｋａｐｔｏｎ和石墨环氧材料进行了原子氧效应试验，首次在国内成功的获得了原子氧束流模拟试验的样品结果。对样品的表面形貌分析证明：试验结果完全与国外同类设备的试验结论一致，这标志着中国在原子氧地面模拟技术领域的研究已取得重要进展。     

舰载飞机自动着舰系统的研究

介绍了舰载飞机的自动着舰系统（包括了飞机的飞行控制系统，推力控制系统及航空母舰的导引系统），并指出只有精确地控制飞机的不滑轨迹，才能使飞机在航空母舰上安全降落，本文着得讨论俯仰指令型的纵向自动着舰系统的原理、结构及设计，并指出导引指令中对舰体运动的补偿。     

异型孔空心叶片壁厚检测的试验研究

发动机叶片的结构型式和制造误差，直接影响发动机的性能和使用寿命。运用超声波法和电涡流法，对两种不同材料和形式的试件进行了试验。电涡流法受到探头直径和试件几何尺寸的影响，测量误差大，超声波法由于存在测量盲区，测量厚度的下限受到限制。但测量值与实际值相关，若对探头加以改进，用于异型孔空心叶片壁厚检测是可行的。     

高空高速无人飞行器热控制系统设计

针对飞行时间短、速度和高度变化快、表面温度波动大的无人飞行器UAV(Unmanned Aerial Vehicles)热控制系统设计难题,提出了一种可解决实际工程问题的热分析计算方法.即把热天工况、冷天工况和标准天工况作为设计/试验工况;采用参考温度法、高超音速工程预测法或计算流体动力学CFD(Computational Fluid Dynamics)数值模拟法,确定了飞行器表面温度分布,并把其作为后续热分析数学模型的外边界条件;分析结构热容量对瞬态热载荷的影响,建立与之相应的边值问题方程,并采用有限差分法求解;根据高空高速飞行特点及瞬态热载荷值,确定仪器设备舱调温系统方案.     

双三角翼外翼前缘钝化对涡流特性的影响

通过风洞试验，利用７孔探头对７５°／４５°和７５°／６０°两种典型双三角翼进行了空间流场测量，研究了双三角翼前缘形状对大迎角涡流特性的影响．试验结果表明，双三角翼外翼前缘钝化使双涡态的双三角翼内、外翼涡互相靠拢、增加干扰，当出现合并涡态时，使合并涡涡核向内下方偏移；外翼前缘钝化使外翼涡或合并涡的Ｃｐ０、Ｖｘ较尖前缘时为高，最终使外翼涡或合并涡推迟破裂．     

微波泄漏对光抽运铯束频标准确度影响的分析

微波泄漏是影响光抽运铯原子钟准确度的主要因素之一. 傅里叶变换分析法是分析其影响的主要手段,但该方法只能用来分析有效原子速度分布很窄的情况.通过分析和计算,推导出频移随漏场的位置、相位和幅度变化的关系式.计算和分析的结果表明,漏场引起频移大小和漂移区的长度、输入微波功率值和漏场的相位、强度和位置等有关.所得的结果和用傅里叶变换方法分析所得的结果是一致的,分析的方法不受原子有效速度限制.     

基于参数化模型和遗传算法的复合材料加筋壁板结构选型优化研究

针对复合材料加筋壁板的结构优化选型问题,采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用PATRAN/NASTRAN的参数化建模功能和遗传算法相结合的复合材料加筋壁板的优化方法,对5种复合材料结构形式进行了从2000N/mm到6000N/mm压缩载荷下的结构优化分析。结果表明,当载荷小于4500N/mm时,最有效的加筋壁板结构型式为J型;当压缩载荷大于4500N/mm时,最有效的加筋壁板结构型式为I型。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

Exploiting global information in complex network repair processes

Robustness of complex networks has been studied for decades,with a particular focus on network attack.Research on network repair,on the other hand,has been conducted only very lately,given the even higher complexity and absence of an effective evaluation metric.A recently proposed network repair strategy is self-healing,which aims to repair networks for larger compo nents at a low cost only with local information.In this paper,we discuss the effectiveness and effi ciency of self-healing,which limits network repair to be a multi-objective optimization problem and makes it difficult to measure its optimality.This leads us to a new network repair evaluation metric.Since the time complexity of the computation is very high,we devise a greedy ranking strategy.Evaluations on both real-world and random networks show the effectiveness of our new metric and repair strategy.Our study contributes to optimal network repair algorithms and provides a gold standard for future studies on network repair.