SCR技术制备A2017半固态材料及其触变性能的研究

单辊搅拌技术 (SCRShearing/CoolingRollProcess)技术制备的A2 0 17半固态材料比常规铸造坯组织优良 ;SCR技术制备的A2 0 17半固态材料在 5 30～ 5 70℃范围内 ,可以进行触变成形 ;半固态成形平均屈服强度比热加工时的屈服强度低 10MPa ;A2 0 17半固态材料触变过程分为四个阶段 ,稳定触变阶段A2 0 17半固态材料的触变性能稳定 ,半固态加工时容许的最大加工变形范围为 6 4 %～ 72 %。     

农林飞机结构抗坠毁设计技术

农林飞机通常在3-5m的超低空进行作业飞行,在离地面3m以上的空中往往会有树木、电线杆、电线、堤坝、土堆、山丘、建筑物等障碍物,稍有不慎,就有与之撞击的可能。这样的工作条件除要求飞机具有良好的超低空飞行性能以外,还要求飞机具有一定的耐坠撞能力。本文针对农林飞机执行任务过程中可能发生的碰撞、坠毁等特点,研究了农林飞机抗坠毁设计技术、计算分析仿真技术。     

飞机主操纵系统疲劳试验载荷监控方法研究——应变数据分析法

针对某机全机主操纵系统疲劳试验中动态操纵情况下的应变测量以及试验载荷监控问题进行了分析和讨论,并对基于应变测量数据分析的操纵系统疲劳试验载荷监控方法的确定及其应用效果进行了阐述。在操纵系统疲劳试验过程中的实际监控结果表明,该方法对副翼/平尾/方向舵操纵系统多种试验状态下的试验载荷监控实用有效。     

Mo M-PO/SBR Algorithm Based on Collaborative Platform and Mixed Model

For electromagnetic scattering of 3-D complex electrically large conducting targets,a new hybrid algorithm,Mo M-PO/SBR algorithm,is presented to realize the interaction of information between method of moment(Mo M)and physical optics(PO)/shooting and bouncing ray(SBR). In the algorithm,the COC file that based on the Huygens equivalent principle is introduced,and the conversion interface between the equivalent surface and the target is established. And then,the multi-task flow model presented in this paper is adopted to conduct CPU/graphics processing unit(GPU)tests of the algorithm under three modes,i.e.,MPI/Open MP,MPI/compute unified device architecture(CUDA) and multi-task programming model(MTPM). Numerical results are presented and compared with reference solutions in order to illustrate the accuracy and the efficiency of the proposed algorithm.     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

工业园区配套住房的成本分担机制——以东北某市谋划的“廉租家户式公寓”为例

农业转移人口市民化成本是新型城镇化推进的主要障碍,其中住房成本占有较大的份额。工业园区是农业转移人口的就业集聚区,现有的保障性住房供给体系并未将农民工全面纳入,尚未充分考虑农业转移人口的临时性居住问题。东北某市运用成本分担机制谋划的"廉租家户式公寓"项目,实现了农业转移人口短期居住的"优区位、高品质、全配套、低租金",形成了政府、企业、个人三方积极参与、合作共赢的格局。该模式的核心要义在于政府的克己惠民,或将成为工业园区周边配套住房供给的可推广模式。     

李清照《醉花阴》赏析

李清照是北宋婉约派词人的代表作家,她的词刻画细腻,微妙的心理活动,表达丰富多样的感情体验,塑造鲜明、生动的艺术形象。《醉花阴》通过白日独坐,对花浅酌的场景,人花比瘦,刻画词人思念之情。     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

温度对飞机燃油射流泵工作特性影响

建立了射流泵数学模型,采用数值计算方法对其工作特性进行了模拟,搭建了实验台,采用RP-3燃油,通过实验数据验证了模型的正确性.在此基础上,分别选择了RP-3和JET-A两种燃油,计算了从-40℃~40℃温度下,不同操作压力对射流泵流量比的影响.结果表明:燃油温度高于0℃时,温度对射流泵工作特性影响并不明显,随着温度的降低,射流泵性能与标准温度下（20℃）偏差越来越大,且压比越高此偏差越明显.当温度高于0℃时,采用RP-3和JET-A燃油性能相差不大,RP-3燃油性能略优于JET-A燃油,但是在低温下,RP-3燃油性能远高于JET-A燃油.因此当燃油温度较低且压比较高时,必须充分考虑温度对射流泵特性的影响.