Track segment association, fine-step IMM and initialization with Doppler for improved track performance

In this work we present a new track segment association technique to improve track continuity in large-scale target tracking problems where track breakages are common. A representative airborne early warning (AEW) system scenario, which is a challenging environment due to highly maneuvering targets, close target formations, large measurement errors, long sampling intervals, and low detection probabilities, provides the motivation for the new technique. Previously, a tracker using the interacting multiple model (IMM) estimator combined with an assignment algorithm was shown to be more reliable than a conventional Kalman filter based approach in tracking similar targets but it still yielded track breakages due to the difficult environment. In order to combine the broken track segments and improve track continuity, a new track segment association algorithm using a discrete optimization approach is presented. Simulation results show that track segment association yields significant improvements in mean track life as well as in position, speed, and course rms errors. Also presented is a modified one-point initialization technique with range rate measurements, which are typically ignored by other initialization techniques, and a fine-step IMM estimator, which improves performance in the presence of long revisit intervals. Another aspect that is investigated is the benefit of "deep" (multiframe or N-dimensional, with N > 2) association, which is shown to yield significant benefit in reducing the number of false tracks.     

Multibaseline ATI-SAR for robust ocean surface velocity estimation

An open problem of along-track interferometry (ATI) for synthetic aperture radar (SAR) sensing of ocean surface currents is the need of ancillary wind information for inversion of Doppler centroid measurements, that have to be compensated for the propagation velocity of advancing and/or receding Bragg scatterers. We propose three classes of estimators which exploit multibaseline (MB) ATI acquisition and Doppler resolution for robust data inversion under different degrees of a priori information about the wind direction and the value of the characteristic Bragg frequency. Performance analysis and comparison with conventional ATI show that the proposed MB estimators can produce accurate velocity estimates in the absence of detailed ancillary data.     

Shuttle performance improvements through multiple database integration

The ability to model and analyze system performance is a key enabler when you are extending the operational life of complex systems. This is especially true when the system is operating in a hostile environment, such as space. This paper discusses a change made to the Space Shuttle main engines (SSMES) that affected the solid rocket booster (SRB) performance, and illustrates how databases maintained by the different subsystem contractors can be integrated, correlated, and evaluated to improve a subsystem component performance model. The enhanced model can be used not only for better prediction of component performance on the existing system, but can be used on upgrades to the system, or the next generation space shuttle solid rocket. motor.     

Real-time translational control of a MEMS comb resonator

Closed-loop control has been successfully applied to a microelectromechanical systems (MEMS) lateral comb resonator device in real-time to perform impulse disturbance damping and sinusoidal position control, enabled by the use of a through-wafer optical microprobe to obtain position feedback. This result leverages the application of lifetime, in-situ control of MEMS in order to provide quality assurance of microsystems in safety critical applications. A position feedback signal produced by a through-wafer optical microprobe has been used for comb resonator system model identification by two independent methods to accurately determine the effective mass, damping, and spring constant values of the device. After accurate determination of system parameters, closed-loop impulse disturbance damping and proportional-integral-differential (PID) translational control were applied. Closed-loop control results presented indicate controllability of such microstructures and response times on the order of the natural frequency of the device.     

Design of the TRIO system-on-chip for aerospace

Several design and testing aspects of the TRIO smart sensor data acquisition chip, developed by JHU/APL for NASA spacecraft applications are presented. TRIO includes a 10 bit self-corrected analog-to-digital converter (ADC), 16/32 analog inputs, a front end multiplexer with selectable aquisition time, a current source, memory, serial and parallel bus, and control logic. So far TRIO is used in many missions including Contour, Messenger, Stereo, Pluto, and the generic JPL X2000 spacecraft bus.     

Linear parametrically varying systems with brief instabilities: an application to vision/inertial navigation

This paper addresses the problem of nonlinear filter design to estimate the relative position and velocity of an unmanned air vehicle (UAV) with respect to a point on a ship using infrared (IR) vision, inertial, and air data sensors. Sufficient conditions are derived for the existence of a particular type of complementary filters with guaranteed stability and performance in the presence of so-called out-of-frame events that arise when the vision system loses its target temporarily. The results obtained build upon new developments in the theory of linear parametrically varying systems (LPVs) with brief instabilities - also reported in the paper - and provide the proper framework to deal with out-of-frame events. Field tests with a prototype UAV illustrate the performance of the filter and the scope of applications of the new theory developed.     

Angle estimation for two unresolved targets with monopulse radar

Most present-day radar systems use monopulse techniques to extract angular measurements of sunbeam accuracy. The familiar "monopulse ratio" is a very effective means to derive the angle of a single target within a radar beam. For the simultaneous estimation of the angles of two closely-spaced targets, a modification on the monopulse ratio was derived in (Blair and Pearce, 2001), while (Sinha et al., 2002) presented a maximum likelihood (ML) technique via numerical search. In this paper it is shown that the ML solution can in fact be found explicitly, and the numerical search of ((Sinha et al., 2002) is unnecessary. However, the ML solution requires the signal to noise ratio (SNR) for each target to be known, and hence we generalize it so it requires only the relative SNR. Several versions of expectation maximization (EM) joint angle estimators are also derived, these differing in the degree to which prior information on SNR and on beam pattern are assumed. The performances of the different direction-of-arrival (DOA) estimators for unresolved targets are studied via Monte Carlo, and it is found that most have similar performance: this is remarkable since the use of prior information (SNR, relative SNR, beam pattern) varies widely between them. There is, however, considerable performance variability as a function of the two targets' off-boresight angles. A simple combined technique that fuses the results from different approaches is thus proposed, and it performs well uniformly.     

Role of BIT in support system maintenance and availability

The role of built in test (BIT) in electronic systems has grown in prominence with the advances in system complexity and concern over maintenance lifecycle costs of large systems. In an environment where standards drive system designs (and provide an avenue for focused advancement in technology), standards for BIT are very much in an evolutionary state. The reasons for advancing the effectiveness of BIT include reduced support overhead, greater, confidence in operation, and increased system availability. The cost of supporting military electronic systems (avionics, communications, and weapons systems) has driven much of the development in BIT technology. But what about the systems that support these end items that contain test and measurement instrumentation - such as automatic test equipment (ATE), simulators and avionics development suites? There has also been a beneficial effect on the maintenance and availability of these systems due to the infusion of BIT into their component assemblies. But the effect has been much more sporadic and fragmented. This paper looks at the state of BIT in test and measurement instruments, explain its affect on system readiness, and present ideas on how to improve BIT technologies and standards. This will not provide definitive answers to BIT development questions, since the factors that affect it are specific to the instrument itself. The topics covered in this paper are: definitions of built-in test, instrument BIT history, importance of BIT fault coverage and isolation in support systems, overview of BIT development process issues that limit the effectiveness of BIT Standards related to instrument BIT, making BIT more effective in support system maintenance and availability and conclusions.     

Polar format algorithm for bistatic SAR

Matched filtering (MF) of phase history data is a mathematically ideal but computationally expensive approach to bistatic synthetic aperture radar (SAR) image formation. Fast backprojection algorithms (BPAs) for image formation have recently been shown to give improved O(N/sup 2/ log/sub 2/N) performance. An O(N/sup 2/ log/sub 2/N) bistatic polar format algorithm (PFA) based on a bistatic far-field assumption is derived. This algorithm is a generalization of the popular PFA for monostatic SAR image formation and is highly amenable to implementation with existing monostatic image formation processors. Limits on the size of an imaged scene, analogous to those in monostatic systems, are derived for the bistatic PFA.     

Stochastic game approach to air operations

A command and control (C/sup 2/) problem for military air operations is addressed. Specifically, we consider C/sup 2/ problems for air vehicles against ground-based targets and defensive systems. The problem is viewed as a stochastic game. We restrict our attention to the C/sup 2/ level where the problem may consist of a few unmanned combat air vehicles (UCAVs) or aircraft (or possibly teams of vehicles), less than say, a half-dozen enemy surface-to-air missile air defense units (SAMs), a few enemy assets (viewed as targets from our standpoint), and some enemy decoys (assumed to mimic SAM radar signatures). At this low level, some targets are mapped out and possible SAM sites that are unavoidably part of the situation are known. One may then employ a discrete stochastic game problem formulation to determine which of these SAMs should optimally be engaged (if any), and by what series of air vehicle operations. We provide analysis, numerical implementation, and simulation for full state-feedback and measurement feedback control within this C/sup 2/ context. Sensitivity to parameter uncertainty is discussed. Some insight into the structure of optimal and near-optimal strategies for C/sup 2/ is obtained. The analysis is extended to the case of observations which may be affected by adversarial inputs. A heuristic based on risk-sensitive control is applied, and it is found that this produces improved results over more standard approaches.