Numerical study of intrachamber processes dynamics at nozzleless solid propellant rocket engine actuation

The results of the comprehensive numerical analysis for dynamics of intrachamber processes that appear at nozzleless solid propellant rocket engine (SPRE) actuation are presented. A complete cycle of rocket engine operation is analyzed. We solve a conjugate problem involving the igniter actuation; heating, ignition and following combustion of a solid propellant charge; a combustion product flow in the combustion chamber; depressurization of the combustion chamber, and the subsequent motion of the rocket engine blank; variation of the combustion surface geometry at the expense of the gradual and nonuniform burnout of solid propellant web.     

Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

Application of the graph-analytical method of tree risk assessment to study survivability of small trust liquid rocket engines

The present paper discusses a need to develop a methodology of predicting the reliability of small thrust liquid rocket engines with a flow section made of composite materials under actual operating conditions for their successful practical use in the propulsion systems.     

Water and Volatiles in the Outer Solar System

Space Science Reviews - Space exploration and ground-based observations have provided outstanding evidence of the diversity and the complexity of the outer solar system. This work presents our...     

航空发动机润滑系统通用分析软件开发

发展了一种全新的航空发动机润滑系统通用分析软件.采用流动换热的网络算法, 将发动机润滑系统分解成由相应的典型元件和节点组成的网络, 用有限的元件和流动介质类型就可描述通用的发动机润滑系统.元件分为简单元件和组合元件, 并和润滑系统结构一一对应, 方便了元件的初始化.软件前台采用图形建模方式生成计算网络, 后台采用了网络自动识别技术, 方便了复杂网络的建立.可视化界面及支撑数据库, 提高了软件的易用性.      

学科间载荷参数空间插值传递方法

针对多学科优化分析中面面耦合学科网格间载荷传递的问题, 提出了在参数空间中的三次函数插值传递方法.该方法将三维空间的源学科载荷点投影到二维参数空间平面上, 用三次插值函数对目标点载荷进行计算.此方法解决了叶片表面弯曲对载荷传递精度的影响.某涡轮叶片温度传递的结果表明本文的方法具有很高的精度.      

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.