Austrian dose measurements onboard space station MIR and the International Space Station--overview and comparison.

The Atominstitute of the Austrian Universities has conducted various space research missions in the last 12 years in cooperation with the Institute for Biomedical Problems in Moscow. They dealt with the exact determination of the radiation hazards for cosmonauts and the development of precise measurement devices. Special emphasis will be laid on the last experiment on space station MIR the goal of which was the determination of the depth distribution of absorbed dose and dose equivalent in a water filled Phantom. The first results from dose measurements onboard the International Space Station (ISS) will also be discussed. The spherical Phantom with a diameter of 35 cm was developed at the Institute for Biomedical Problems and had 4 channels where dosimeters can be exposed in different depths. The exposure period covered the timeframe from May 1997 to February 1999. Thermoluminescent dosimeters (TLDs) were exposed inside the Phantom, either parallel or perpendicular to the hull of the spacecraft. For the evaluation of the linear energy transfer (LET), the high temperature ratio (HTR) method was applied. Based on this method a mean quality factor and, subsequently, the dose equivalent is calculated according to the Q(LET infinity) relationship proposed in ICRP 26. An increased contribution of neutrons could be detected inside the Phantom. However the total dose equivalent did not increase over the depth of the Phantom. As the first Austrian measurements on the ISS dosimeter packages were exposed for 248 days, starting in February 2001 at six different locations onboard the ISS. The Austrian dosimeter sets for this first exposure on the ISS contained five different kinds of passive thermoluminescent dosimeters. First results showed a position dependent absorbed dose rate at the ISS.     

Enzyme conversion of lignocellulosic plant materials for resource recovery in a Controlled Ecological Life Support System.

A large amount of inedible plant material composed primarily of the carbohydrate materials cellulose, hemicellulose, and lignin is generated as a result of plant growth in a Controlled Ecological Life-Support System (CELSS). Cellulose is a linear homopolymer of glucose, which when properly processed will yield glucose, a valuable sugar because it can be added directly to human diets. Hemicellulose is a heteropolymer of hexoses and pentoses that can be treated to give a sugar mixture that is potentially a valuable fermentable carbon source. Such fermentations yield desirable supplements to the edible products from hydroponically-grown plants such as rapeseed, soybean, cowpea, or rice. Lignin is a three-dimensionally branched aromatic polymer, composed of phenyl propane units, which is susceptible to bioconversion through the growth of the white rot fungus, Pluerotus ostreatus. Processing conditions, that include both a hot water pretreatment and fungal growth and that lead to the facile conversion of plant polysaccharides to glucose, are presented.     

AFIT neural network research

A brief summary of research done at the Air Force Institute of Technology (AFIT) in the area of neural networks is provided. It has been shown that backpropagation, used for feedforward artificial neural networks, is just a degenerate version of an extended Kalman filter, and that networks can do about as well as the optimum statistical classification technique. A method of finding the importance of features for use by a neural network classifier has been determined. Techniques for using neural networks for image segmentation have been developed. In optical pattern recognition, techniques that allow the processing of real FLIR (forward-looking infrared) images with existing binary spatial light modulators have been devised. An optical direction of arrival detector applicable to laser illumination direction determination has been designed and tested; the design is similar to a fly's eye. Coated mirrors for the optical confocal Fabry-Perot interferometer have been designed, specified, fabricated, and installed. Significant progress has been made in the use of neural networks for processing multiple-feature sets for speech recognition     

Survey of current situation in radiation belt modeling.

The study of Earth's radiation belts is one of the oldest subjects in space physics. Despite the tremendous progress made in the last four decades, we still lack a complete understanding of the radiation belts in terms of their configurations, dynamics, and detailed physical accounts of their sources and sinks. The static nature of early empirical trapped radiation models, for examples, the NASA AP-8 and AE-8 models, renders those models inappropriate for predicting short-term radiation belt behaviors associated with geomagnetic storms and substorms. Due to incomplete data coverage, these models are also inaccurate at low altitudes (e.g., <1000 km) where many robotic and human space flights occur. The availability of radiation data from modern space missions and advancement in physical modeling and data management techniques have now allowed the development of new empirical and physical radiation belt models. In this paper, we will review the status of modern radiation belt modeling.     

TerraSAR-X active radar ground calibrator system

In April 2006, the TerraSAR-X satellite was launched. This paper describes the development of a novel and highly integrated, digitally-controlled active SAR system calibrator (DARC). It consists of both an active transponder path for absolute radiometric calibration and a calibrated receiver chain for antenna pattern evaluation of the satellite antenna. A total of 16 active transponder and receiver systems and 17 receiver-only systems will be fabricated for a calibration campaign in 2006.     

James Webb Space Telescope: Project Overview

The James Webb Space Telescope (JWST) project at the NASA, Goddard Space Flight Center (GSFC) is responsible for the development, launch, flight, and science operations for the telescope. The project is in phase B with its launch scheduled for no earlier than June 2013. The project is a partnership among NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA). The JWST mission team is fully in place, including major ESA and CSA subcontractors. This provides an overview of the planned JWST science, current architecture focusing on the instrumentation, and mission status, including technology developments, and risks.     

Recent Breakthroughs in RF Photonics for Radar Systems

Radar systems require transmission of very high purity signals. Photonics is now mature enough to achieve analog transmission with very low noise, strong immunity, and wide-bandwidth even in harsh environments. We present our recent developments of optimized optical links dedicated to radar and multifunction systems     

Spiral evolution applied to legacy avionics systems

The US Department of Defense (DoD), through the Office of the Secretary of Defense (OSD), has determined that evolutionary acquisition is their strategy of choice for future software-intensive systems, and that the spiral development model (SDM) is the preferred method/process for software-intensive development life cycles. Electronic Systems Command (ESC) at Hanscom AFB, Massachusetts, has written a draft handbook on the use of Spiral Development for all future Command and Control (C2) systems, including reference to the DoD 5000 series and Air Force Program Directive 63-1, Acquisition System, which deploys this OSD mandate for future C2 systems. Barry Boehm's continued work on SDM which he conceived in the 1980s, is heavily biased toward development of new systems that are software-intensive, as noted in a workshop he gave at the Software Engineering Institute (SEI) in 2000.     

Airborne radar: its beginnings in World War II

Although not realized at the time, the defeat of the German Air Force in the summer of 1940 was one of the crucial battles of World War II. The narrow margin of victory can be ascribed to Britain's air-warning radar, Chain Home (CH), consisting of the 15-meter CH and the 1.5-meter CHL. The skillful use of this equipment by the Royal Air Force made daylight bombing unsustainable; the Luftwaffe then turned to night attacks, generally called "The Blitz." These were not effective in destroying military and industrial targets and depended on the hope of reducing the population's will to fight. Chain Home was of little use except to observe the attackers arrival, as it had almost no ability to follow the attackers as they proceeded inland. This eventuality was reckoned with before the outbreak of hostilities and had called for radars mounted in night fighters capable of guiding the pilot close enough to the target for him to open fire visually. The electronic techniques used at 1.5-meters were adapted to planes capable of carrying the radar and its operator. But there were three important design constraints: 1) the antennas had to be restricted to sizes that were practical for installation on aircraft, which for meter waves gave them low gain and large side lobes; 2) the set's maximum range was limited by the fighter's altitude as a result of the huge ground returns from the side lobes. British antiaircraft artillery, the stepchild of their arms, was too ineffective to drive the bombers to extreme altitudes; and 3) a minimum range had to be held until the flier could see his target, which strained the pulse techniques of the time.     

HMS SCOTT ring laser gyro navigator integration

HMS SCOTT is a United Kingdom ocean survey vessel that hosts a state-of-the-art deep ocean mapping system which was designed, developed, and is currently maintained and periodically updated by the Space and Naval Warfare Systems Center, San Diego, (SSC San Diego). A recent update of this system consisted of the replacement of an obsolete and very costly to maintain inertial navigation system. Another reason for updating the ship's inertial system was to provide higher accuracy attitude data, than was previously available with the old inertial system, to the high resolution multi-beam sonar system in order to produce improved bathymetric charts. After conducting a market survey of suitable inertial navigator systems, the Kearfott SEANAV ring laser gyro navigator (RLGN) system, using a monolithic T-24 gyro, was selected to replace the old inertial system. The selection of the SEANAV RLGN was based on its relatively low cost, high reliability, and, particularly, the roll and pitch data accuracies of typically less than 1-arc-minute. This attitude data accuracy was key to enable a significant improvement in the bathymetry data accuracy. Two SEANAV systems were integrated with GPS receivers, a system master time code generator, and electro magnetic (EM) log and Doppler sonar speed sensors to provide the navigation portion of the mapping data. Operational testing of this updated system aboard HMS SCOTT, in November, 2003, showed a marked improvement in the quality of the map product due, in part, to the improved attitude data provided by the SEANAV RLGN system.