Instrumentation and data systems for high-time resolution study of space plasma shocks

This paper deals with the principal methods of achieving high-time resolution measurements for the study of fine structure of shocks and other discontinuities in space plasmas. In the measurements of ion energy spectra, we have obtained the time resolution about 1s.In the Soviet-Czechoslovak INTERSHOCK project we will obtain temporal resolution better than 0.1s in the measurement of the main plasma parameters. This will be obtained with the multichannel energy spectrometer and the on-board data acquisition and processing system triggered by the shock signature. This system controls the data sampling rate from some scientific instruments and switches on a high-sampling rate near the shock. The method implies detecting a shock by means of on-board processing of magnetic field and plasma parameters. The algorithm for this detection uses both parameters separately as well as in combinations.     

Magnetic field experiment for Voyagers 1 and 2

The magnetic field experiment to be carried on the Voyager 1 and 2 missions consists of dual low field (LFM) and high field magnetometer (HFM) systems. The dual systems provide greater reliability and, in the case of the LFM's, permit the separation of spacecraft magnetic fields from the ambient fields. Additional reliability is achieved through electronics redundancy. The wide dynamic ranges of ± 0.5 G for the LFM's and ± 20 G for the HFM's, low quantization uncertainty of ± 0.002 ( = 10^–5 G) in the most sensitive (± 8 ) LFM range, low sensor RMS noise level of 0.006 , and use of data compaction schemes to optimize the experiment information rate all combine to permit the study of a broad spectrum of phenomena during the mission. Objectives include the study of planetary fields at Jupiter, Saturn, and possibly Uranus; satellites of these planets; solar wind and satellite interactions with the planetary fields; and the large-scale structure and microscale characteristics of the interplanetary magnetic, field. The interstellar field may also be measured.     

Pseudotransfer Function to Characterize a Hard Limiter

Results are reported on the attempt to define a pseudotransfer funtion of a circuit composed of a 2-pulse canceler and hard limiter.     

Spectral observation of the composite supernova remnant G 29.7-0.3

The X-ray properties of the supernova remnant G 29.7-0.3 are discussed based on spectral data from the EXOSAT satellite. In the 2 to 10 keV range a featureless power-law spectrum is obtained, the best-fit parameters being: energy spectral index =-0.77, hydrogen column density on the line of sight N_H=2.3.10²² cm^–2. The incident X-ray flux from the source is (3.6±0.1) 10¹¹ erg cm^–2 s^–1 in the 2 to 10 keV range corresponding to an intrinsic luminosity of about 2. 10³⁶ erg s^–1 for a distance of 19 kpc. The source was not seen with the imaging instrument thus constraining the hydrogen column density to be N_H=(3.3 ±0.3) 10²² cm^–2 and the energy spectral index =1.0±0.15. This new observation is consistent with emission by a synchroton nebula presumably fed by an active pulsar. An upper limit of 1.5% for the pulsed fraction in the range of periods 32ms to 10⁴ s has been obtained.     

Analysis of Limit Cycles in a Two-Transistor Saturable-Core Parallel Inverter

A familiar two-transistor saturable-core parallel inverter is modeled as a nonlinear negative resistance in parallel with energy-storage elements. The techniques of singular-point analysis are combined with piecewise linear techniques to permit determination of solution trajectories on the phase plane. Clear insight is provided, not only into steady-state oscillation, but also into transient behavior of the circuit. Experimental results confirming the analytical model are included.     

Low-Level Signal Detection Using a New Transform Class

A system is developed to detect tracks crossing two-dimensional noise fields. This is accomplished by filtering and integration of signal power in the frequency domain of a new class of generalized transforms which include the FFT and FBT as limiting forms. If the track is essentially parallel to a transform axis and if filters are derived from hard-limited linear approximations to tracks, the FBT offers considerable hardware economy over the FFT in the mechanization algorithm.     

Radar Calibration Test Satellite

A satellite has been designed for application to radar calibration. Electromagnetic and mechanical characteristics of the satellite and their influence on the selection of shape and other parameters are discussed. Theoretical and experimental scattering data are included.     

Doppler Return from a Random Rough Surface

A theoretical analysis of the Doppler return from a random rough surface ace shows that the Doppler spectrum is composed of three distinct components. The methods of analysis for determining the average power return for the static case and an application of the ergodic hypothesis for a stationary surface show that the assumption of a single Doppler component is based on a smooth surface. In addition to this coherent component, the incoherent components of the random rough surface produce two additional frequency components. The amplitudes of these latter components depend on the variance of the surfaceand the antenna beamwidth averaging. Radar measurements were made, utilizing a scatterometer, in order to measure the surface characteristics. s. Simultaneous measurements from a Doppler radar system were analysed to identify the additional frequency components.     

Multiple Target Effects on Monopulse Signal Processing

Analysis of a typical amplitude-comparison monopulse angle-tracking radar shows that gain variation and bias in the radar error signal can occur under certain conditions involving multiple targets. The general behavior depends on the Doppler separation of the targets relative to system bandwidths; for a specific situation, the gain variation and bias are functions of the relative strengths of the targs. The analysis is shown to be consistent with experimental observations.     

Pulsar magnetospheres

The structure of both the interior and exterior pulsar magnetosphere depends upon the strength of its plasma source near the surface of the star. We review magnetospheric models in the light of a vacuum pair-production source model proposed by Sturrock, and Ruderman and Sutherland. This model predicts the existence of a cutoff, determined by the neutron star's spin rate and magnetic field strength, beyond which coherent radio emission is no longer possible. The observed distribution of pulsar spin periods and period derivatives, and the distribution of pulsars with missing radio pulses, is quantitatively consistent with the pair production threshold, when its variation of neutron star radius and moment of inertia with mass is taken into account. All neutron stars observed as pulsars can have relativistic magnetohydrodynamic wind exterior magnetospheres. The properties of the wind can be directly related to those of the pair production source. Radio pulsars cannot have relativistic plasma wave exterior magnetospheres. On the other hand, most erstwhile pulsars in the galaxy are probably halo objects that emit weak fluxes of energetic photons that can have relativistic wave exterior magnetospheres. Extinct pulsars have not been yet observed.Proceedings of the NASA/JPL Workshop on the Physics of Planetary and Astrophysical Magnetospheres.Institute of Geophysics and Planetary Physics, UCLA.Center for Plasma Physics and Fusion Engineering, UCLA.On leave from: Centre de Physique Theorique, Ecole Polytechnique, Palaiseau, France.