Microperturbations on the <Emphasis Type="Italic">International Space Station</Emphasis> during physical exercises of the crew

The results of a preliminary analysis of microperturbations on the International Space Station during physical exercises of the crew are presented. The goal of this paper is to identify the parameters of perturbations when physical exercises are performed. The results of measurements by sensors of microaccelerations of both Russian and American segments during physical exercises in the service module of the Russian segment are analyzed.     

Spectroscopic Constraints on Models of Ion-cyclotron Resonance Heating in the Polar Solar Corona

Using empirical velocity distributions derived from UVCS and SUMER ultraviolet spectroscopy, we construct theoretical models of anisotropic ion temperatures in the polar solar corona. The primary energy deposition mechanism we investigate is the dissipation of high frequency (10-10000 Hz) ion-cyclotron resonant Alfvén waves which can heat and accelerate ions differently depending on their charge and mass. We find that it is possible to explain the observed high perpendicular temperatures and strong anisotropies with relatively small amplitudes for the resonant waves. There is suggestive evidence for steepening of the Alfvén wave spectrum between the coronal base and the largest heights observed spectroscopically. Because the ion-cyclotron wave dissipation is rapid, even for minor ions like O⁵⁺, the observed extended heating seems to demand a constantly replenished population of waves over several solar radii. This indicates that the waves are generated gradually throughout the wind rather than propagated up from the base of the corona. This revised version was published online in June 2006 with corrections to the Cover Date.     

The effect of geocenter motion on Jason-2 orbits and the mean sea level

We compute a series of Jason-2 GPS and SLR/DORIS-based orbits using ITRF2005 and the std0905 standards ( Lemoine et al., 2010). Our GPS and SLR/DORIS orbit data sets span a period of 2 years from cycle 3 (July 2008) to cycle 74 (July 2010). We extract the Jason-2 orbit frame translational parameters per cycle by the means of a Helmert transformation between a set of reference orbits and a set of test orbits. We compare the annual terms of these time-series to the annual terms of two different geocenter motion models where biases and trends have been removed. Subsequently, we include the annual terms of the modeled geocenter motion as a degree-1 loading displacement correction to the GPS and SLR/DORIS tracking network of the POD process. Although the annual geocenter motion correction would reflect a stationary signal in time, under ideal conditions, the whole geocenter motion is a non-stationary process that includes secular trends. Our results suggest that our GSFC Jason-2 GPS-based orbits are closely tied to the center of mass (CM) of the Earth consistent with our current force modeling, whereas GSFC’s SLR/DORIS-based orbits are tied to the origin of ITRF2005, which is the center of figure (CF) for sub-secular scales. We quantify the GPS and SLR/DORIS orbit centering and how this impacts the orbit radial error over the globe, which is assimilated into mean sea level (MSL) error, from the omission of the annual term of the geocenter correction. We find that for the SLR/DORIS std0905 orbits, currently used by the oceanographic community, only the negligence of the annual term of the geocenter motion correction results in a – 4.67 ± 3.40 mm error in the Z-component of the orbit frame which creates 1.06 ± 2.66 mm of systematic error in the MSL estimates, mainly due to the uneven distribution of the oceans between the North and South hemisphere.     

Vibrations of a shell with the discretely attached dynamic subsystem

A problem on low vibrations of a thin spherical shell is considered. A solid of finite dimensions is discretely attached to the shell by means of an elastic rod system. The calculation examples are presented.     

A capillary-driven root module for plant growth in microgravity.

A new capillary-driven root module design for growing plants in microgravity was developed which requires minimal external control. Unlike existing systems, the water supply to the capillary-driven system is passive and relies on root uptake and media properties to develop driving gradients which operate a suction-induced flow control valve. A collapsible reservoir supplies water to the porous membrane which functions to maintain hydraulic continuity. Sheet and tubular membranes consisting of nylon, polyester and sintered porous stainless steel were tested. While finer pore sized membranes allow greater range of operation, they also reduce liquid flux thereby constraining system efficiency. Membrane selection should consider both the maximum anticipated liquid uptake rate and maximum operating matric head (suction) of the system. Matching growth media water retention characteristics to the porous membrane characteristics is essential for supplying adequate liquid flux and gas exchange. A minimum of 10% air-filled porosity (AFP) was necessary for adequate aeration. The capillary-driven module maintained hydraulic continuity and proper gas exchange rates for more than 80 days in a plant growth experiment.     

Influence of climatic operational conditions of a helicopter on physico-mechanical properties of composite materials

The results of numerical and experimental study of physico-mechanical properties of composite materials are proposed and variations in rigidity characteristics of the hub working part of the hingeless type within the entire range of helicopter operational temperatures are evaluated.     

ARTEMIS Mission Design

The ARTEMIS mission takes two of the five THEMIS spacecraft beyond their prime mission objectives and reuses them to study the Moon and the lunar space environment. Although the spacecraft and fuel resources were tailored to space observations from Earth orbit, sufficient fuel margins, spacecraft capability, and operational flexibility were present that with a circuitous, ballistic, constrained-thrust trajectory, new scientific information could be gleaned from the instruments near the Moon and in lunar orbit. We discuss the challenges of ARTEMIS trajectory design and describe its current implementation to address both heliophysics and planetary science objectives. In particular, we explain the challenges imposed by the constraints of the orbiting hardware and describe the trajectory solutions found in prolonged ballistic flight paths that include multiple lunar approaches, lunar flybys, low-energy trajectory segments, lunar Lissajous orbits, and low-lunar-periapse orbits. We conclude with a discussion of the risks that we took to enable the development and implementation of ARTEMIS.     

The bimodal magnetosphere and ring current, radiation belt, and tail transducers

It has generally been assumed that a geomagnetic storm is entirely driven by external forces—e.g., solar wind E_y = V_x × B_z, V_x, V²_x (where the components of the electric field, E, the magnetic field, B, and velocity, V, are given in GSE coordinates)—which would imply that particle injections in the ring current (RC) or outer radiation belts should be highly correlated. However the data from ISTP are showing that the magnetosphere can have at least two very different responses to the same solar wind (SW) conditions: a classic, enhanced RC with Dst response, or a 1000-fold increase in the outer radiation belt MeV electrons (ORBE). August 29, October 14 and 23, 1996 are examples of Dst storms, whereas April 15, 1996 and January 10, 1997 are examples of MeV storms. It is this second response that is so deadly to some geosynchronous spacecraft, whereas geomagnetic storms are categorized by the first response. Neither of these appear to be correlated to the SW conditions driving substorms. Why should the SW energy appear in the radiation belts or the ring current independently? We hypothesize that the RC couples to the electric power available (E_y), the ORBE couple to the mechanical power available (V_x), and the Tail couples to the magnetic energy (B_z) available in the SW. The transducer for RC may be subauroral parallel potentials, the transducer for ORBE may be the cusp, while the Tail substorm transducer is yet a third independent mechanism for extracting SW energy. Evidence for this theory comes from the novel POLAR satellite that traverses the cusp, the plasmasheet and the radiation belts.