Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

Space telescope studies of Jupiter and Saturn simulated by Voyager observations

Space Telescope (ST) observations of Jupiter and Saturn will offer a unique opportunity for monitoring their changing meteorological characteristics. They will provide higher spatial and temporal resolution for composition and vertical structure studies than have been available to date. We have simulated the planetary camera observations of Jupiter and Saturn by Voyager images of the appropriate spatial scale. With this data set we have investigated the meteorological properties of these atmospheres which can be studied at these scales. In addition we have considered the advances obtainable with the high resolution spectrometer on ST compared with observations from ground-based and other Earth-orbiting satellites. These studies will provide insight into the scientific gain and possible problems in the use of ST for planetary studies.     

Wave resistance of rough plane channel walls in the supersonic flow

We propose a method that makes it possible to obtain in the framework of linear approximation the exact formulas for the wave resistance of the channel walls with an arbitrary plane pattern in the first and subsequent interference zones. It is shown by a particular example of the sinusoidal pattern that the pressure wave interference may lead to the positive or negative resistance resonance.     

The Scanning Sky Monitor (SSM) on ASTROSAT

The Scanning Sky Monitor is one of the experiments onboard the ASTROSAT, an Indian multiwavelength astronomy satellite mission. This experiment will detect and monitor X-ray transients in the energy band 2–10 keV. It is similar in design to the ASM on RXTE. It consists of position-sensitive proportional counters with one-dimensional mask. We describe the configuration of the experiment. We also discuss some of the results obtained using a detector which has already been fabricated and tested in our laboratory.     

Information Support for Space Experiments Based on a Numerical-Analytical Theory of Satellite Motion

A software tool for application in calculations of the position and velocity vectors of spacecraft is presented. These vectors are necessary at the stage of processing the data of space experiments and analyzing the results of ground-based observations. A new theory of satellite motion, in a numerical-analytical form, is the basis of this software application. The model of disturbing forces corresponds to recommendations of the International Laser Ranging Service. The reliability of the software tool is confirmed by the results of processing of high-precision laser satellite observations.     

Thermal cyclotron radiation from a hot coronal loop with helical magnetic field

The spectral and polarization properties of thermal cyclotron radio emission from a hot coronal loop with a current along the axis are computed. The magnetic field is supposed to have a component along the loop axis as well as a poloidal part due to the current, both components being of comparable magnitude. In this specific configuration a helical magnetic field is present with a remarkable minimum of its absolute value along the loop axis and a maximum at its periphery. The presence of one or two maxima of magnetic field value along the line of sight results in increasing optical thickness of the gyroresonance layers at appropriate frequencies in the microwave band and, therefore, in enhanced radio emission at those harmonics which are optically thin (for example,s=4). These cannot be observed in models with the commonly employed magnetic field configuration (longitudinal along the loop axis).We show that the frequency spectrum of thermal cyclotron radiation from a hot coronal loop with a helical magnetic field differs from that of the standards-component source (with smooth frequency characteristics and polarization corresponding toe-mode) in that plenty of fine structures (line-like features and cut-offs) are present and theo-mode is prevalent in some frequency intervals. The enhanced radio emission at high harmonics and the complicated form of frequency spectrum in the model considered imply that some microwave sources, which are poorly explained in traditional models of solar active regions, may be associated with helical magnetic fields in hot coronal loops. Computations allow one to indicate spectral and polarizational peculiarities of local sources testifying to the presence of a helical magnetic field.     

Performance and reliability of the NASA Biomass Production Chamber.

The Biomass Production Chamber (BPC) at the Kennedy Space Center is part of the Controlled Ecological Life Support System (CELSS) Breadboard Project. Plants are grown in a closed environment in an effort to quantify their contributions to the requirements for life support. Performance of this system is described. Also, in building this system, data from component and subsystem failures are being recorded. These data are used to identify problem areas in the design and implementation. The techniques used to measure the reliability will be useful in the design and construction of future CELSS. Possible methods for determining the reliability of a green plant, the primary component of a CELSS, are discussed.     

Features of mass supply and flows related with reconnection in the solar corona

Symmetrical broadening in the emission spectral lines is the ultimate observational effect of magnetic reconnection in the solar corona. Reconnection can create plasmas of very different temperatures and, hence, very different electrical conductivities in the corona. The electrodynamical effect of such a mass supply is considered. Electromagnetic expulsion force, different from Parker's well-known magnetic buoyancy force, can effectively balance gravity in prominences and generate fast vortex flows in the vicinity of fine threads inside prominences. The possibility of observing this effect from SOHO is discussed.     

A program to measure new energetic particle nuclear interaction cross sections.

The Transport Collaboration, consisting of researchers from institutions in France, Germany, Italy and the USA, has established a program to make new measurements of nuclear interaction cross sections for heavy projectiles (Z > or = 2) in targets of liquid H2, He and heavier materials. Such cross sections directly affect calculations of galactic and solar cosmic ray transport through matter and are needed for accurate radiation hazard assessment. To date, the collaboration has obtained data using the LBL Bevalac HISS facility with 20 projectiles from 4He to 58Ni in the energy range 393-910 MeV/nucleon. Preliminary results from the analysis of these data are presented here and compared to other measurements and to cross section prediction formulae.     

Guiding technology development and transition into productsresponsive to end-user needs

It is argued that a systems engineering process that develops an understanding of end-user needs and economically develops a product system which includes the right technology advances to satisfy these needs is the best way to ensure success in the market of end-user needs. This customer pulled approach to new and improved products also pulls the necessary technology developments with it and integrates their timing and resource requirements into those of the end product planning. With appropriate concurrent, cross-functional teams working both the planning and the execution, this approach benefits from the wisdom and leadership of the end-user focused team to deliver the desired program results on schedule. This frees top leadership to focus on longer range visions for the product line and technologies