Autoignition of fuel-oxidizer mixtures in microgravity

The paper examines the limitations of quasi-steady autoignition theory in providing information needed for the characterization of autoignition temperature fields. Time-dependent autoignition theory is then utilized to examine the autoignition behavior of a reactive system where both wall catalysis and gas phase kinetic rates are significant. It is found that a diverse range of space-time temperature-composition-pressure histories is possible, depending on the system's thermo-kinetic characteristics.     

Design for testability for future digital avionics systems

The authors describe an integrated testing approach called the Maintenance and Diagnostic System (MADS), which was developed for digital avionics systems using VHSIC and semicustom devices. Mission/operational requirements dictate high availability with capability to detect 98% of all faults and isolate 90% of these faults to a line replacement module (LRM) or 95% of the faults to two LRMs. MADS achieves these goals by defining a module maintenance node (MMN) chip set for each LRM in the system and the design for testability concepts for hardware. The MMN aids parallel, high-speed testing of LRMs, isolating the fault(s) to a module/chip level while incurring less than 10% overhead. It uses the concepts of scan set design, pseudorandom test vector generation, output response compression, and separate scan set loops to test the SSI-MSI logic on the LRM. It also stores interim test results and run-time fault information to isolate the hard-to-reproduce failures and performs verification of interchip and intermodule wiring     

Mapping the earth's magnetic and gravity fields from space: Current status and future prospects

Orbital potential field measurements are sensitive to regional variations in earth density and magnetization that occur over scales of a few hundred kilometers or greater. Global field models currently available are able to distinguish gravity variations of ±5 milligal over distances of ～1,000 km and magnetic variations of ±6 gamma over distances of ～300 km at the earth's surface. Regional variations in field strength have been detected in orbital measurements that are not apparent in higher resolution, low altitude surveys. NASA is presently studying a spacecraft mission known as GRAVSAT/MAGSAT, which would be the first satellite mission to perform a simultaneous survey of the earth's gravity and magnetic fields at low orbital altitudes. GRAVSAT/MAGSAT has been proposed for launch during the latter nineteen-eighties, and it would measure gravity field strength to an accuracy of 1 milligal and magnetic field strength to an accuracy of 2 gamma (scalar)/5 gamma (vector components) over a distance of roughly 100 km. Even greater improvements in the accuracy and spatial resolution of orbital surveys are anticipated during the nineteen-nineties with the development of potential field gradiometers and a tethered satellite system that can be deployed from the Space Shuttle to altitudes of 120 km above the earth's surface.     

The Synthetic-Array Radar Image of a Flat Plate

The radar cross section of a flat plate has a sin x/x lobe structure. If a synthetic-array radar flies past the plate the resulting image is dependent upon what part of this lobe structure is sampled. When the plate is parallel to the flight path, the image is a line as wide as the plate. If the plate is not parallel, only the discontinuities at the ends of the plate are visible in the image.     

A Matched-Filter Pulse-Compression System Using a Nonlinear FM Waveform

The realization of a rectangular pulse-compression waveform having low time sidelobes and zero mismatch loss due to spectral weighting is discussed. The theoretical aspects of the design of such a waveform are presented with particular reference to frequency modulated, rectangular pulses. The design and performance of a matched-filter pulse-compression system having essentially zero mismatch loss are presented. The system discussed has a time-bandwidth product of 22 and time sidelobes suppressed at least 27 dB; the measured mismatch loss is 0.1 dB. The difficulty of achieving the required nonlinear time delay dispersion is overcome by synthesizing the dispersive network as a cascade of all-pass networks.     

Landsat satellite imagery of the Qattara Depression area,Egypt

The Qattara Depression lies in the northern part of the Western Desert of Egypt at a distance of some tens of kilometers to the south of the Mediterranean Sea Coast. The depression in question is the largest one in the great Sahara extending across North Africa. It covers an area of some 19,000 km² at ? 60 m level and the absolute level of its lowest point is about ? 134 m. The depression extends for about 300 km in a roughly ENE-WSW direction, while its width is variable reaching to a maximum of about 145 km. Feasibility studies are currently carried out for the Qattara solar-hydro-electric project which aims at generating hydro-electric power by the drop of the Mediterranean Sea water into the depression after passing through a canal/tunnel system. Peak load electric power may be also generated by raising the water to the small hollow of Deir Kirayim, situated at a higher level near the depression, and allowing it to drop to a low level.For the purpose of assessing the regional criteria involved in the implementation of the project and the environmental impact of such implementation, the Qattara Depression and the surrounding area has been studied on a regional scale by the utilization of LANDSAT satellite imagery. The maps produced by the interpretation of the images in question include those of the geological and environmental units, structural lineations, drainage and vegetation cover. Lineation density and drainage density maps are derived by the computation of the structural lineation and drainage maps respectively. A map of groundwater conditions is worked out on the basis of the image interpretation, and the observations previously carried out on the groundwater aquifers in the Qattara Depression and the surrounding area. LANDSAT satellite image interpretation and computation are supported by intensive observations carried out in the field as well as chemical, petrological and mineralogical analyses of the samples collected.The LANDSAT satellite images proved to be of great importance in mapping the Qattara Depression floor which is hardly accessible to classical mapping, and especially in view of the large area which could be covered by imagery mapping in a reasonably short time compatible with the duration of the feasibility study. The special characters of the spaceborne multispectral imagery have been paramount in deciphering the major regional features of the investigated area.The overall synoptic picture of the regional setting of the geological and environmental units, faults, fractures and folds, drainage lines and plant cover in the large area studied has been clarified for the first time. It has been demonstrated that the Qattara Depression is actually constituted of several small depressions. The environmental impact of the project implementation has been visualized especially regarding the possible influence of the saline water on the fresh groundwater sources. The thick salt accumulation in the depression has been found to be of such extension as to increase the salinity of the Mediterranean Sea water stored in the depression following the implementation of the project. The lineation density map has been particularly of great help in the localization of sites subjected to intense crustal deformation, greater slope instability and run off surface water flooding.     

Altitude Damping of Space-Stable Inertial Navigation Systems

In order to stabilize the altitude calculation in an inertial navigation system, an altimeter is commonly used. In a conventional local-level mechanization, this is generally accomplished by correcting the vertical channel integrators with the difference between the inertial system and altimeter indication of vertical position. However, in a space-stable system the procedure is not as clear since a vertical channel is not physically present. Three altitude damping mechanizations for a space-stable inertial navigation system are proposed. The equivalent local-level mechanizations are then found by comparing error propagation equations in a common coordinate frame.     

On Signal Fluctuations in Tracking Systems

All tracking systems suffer, to some extent, from signal level fluctuations. The signal fluctuations are modeled by a Gaussian process and the noise performance of both linear and nonlinear first-order tracking systems is considered. In the nonlinear case, the Ito versus Stratonovich calculus difficulty arises, but it is resolved to make sense physically. Several analytical results are obtained which are useful in analyses of tracking systems.     

Performance Degradation Due to Specular Multipath Intersymbol Interference

Plots of performance degradation are used to compare the effects of fading and intersymbol interference in a two- component specular multipath digital communications channel. Similar plots are then used to compare two practical receivers designed to combat the interference. Degradation plots are shown to allow easy identification of each receiver's range of usefulness, as well as identification of variance bounds demanded of channel parameter estimates which the receivers require.