航空电子综合测试系统的发展现状及趋势

现代先进战斗机大量采用各种先进的航空电子系统，传统的检测手段一般采用人工方法直接测试将故障定位到电路板级，操作复杂，所需时间长，不能满足现代化战争的快速要求，而且操作人员的劳动量大，不利于连续作战。所以，应用现代化的检测手段检测和确定故障备受关注。本文总结了现役战斗机测试系统的现状，存在的问题，并阐述了测试设备的发展趋势。     

钛合金激光焊接残余应力试验与数值模拟

采用小孔释放法对钛合金薄板激光焊接残余应力进行了试验研究,并基于ANSYS分析软件,针对钛合金薄板的焊接残余应力进行了数值模拟,分析了不同焊接工艺参数对激光焊接残余应力分布的影响.     

民机翼身组合体参数化研究

飞机方案设计阶段,迫切需要一个能够快速评估、计算不同参数组合的翼身组合体基本气动力特性的分析平台。为满足这一实际工程设计需要,本文提出运输类飞机参数化概念和具体研究方法,开发了快速分析计算翼身组合体气动力特性分析平台,结合具体算例验证了方法的可行性和工程实用价值。     

大上翘机身后体设计方法

 在具有大上翘角的运输机机身后体设计中,目前国际上多以上翘角、长细比、收缩比和扁平度4种主要几何参数作为机身后体的设计原则。以国际上3种典型运输机为研究原型,构造了3种大上翘后体机身模型,采用计算流体力学(CFD)方法,研究了3种机身的阻力与绕流特性,综合分析了上翘角、长细比、收缩比和扁平度4种几何参数对机身阻力和绕流特性的影响及其描述大上翘后体形状对阻力特性影响的适用性。研究结果表明：仅占总阻力15％～20％的压差阻力决定机身的阻力特性,机身减阻应从减小压差阻力入手;后体截面形状是影响压差阻力的关键因素,而扁平度不能准确完整地描述后体截面形状对压差阻力的影响,采用近圆度及其沿机身轴线的变化描述后体截面形状的影响更为合理。提出了应以上翘角、长细比、收缩比、近圆度和近圆度沿机身轴线的变化率5种参数为主作为大上翘机身后体设计原则。     

飞机结构初步设计优化中的损伤容限优化方法研究

本文提出并研究了一种在飞机初步设计阶段考虑损伤容限要求优化设计的方法.首先,通过许用应力形式来体现并表征损伤容限设计要求,作为一类新的设计约束,用于初步设计阶段的结构优化设计.然后,通过Global/local分析,在整体优化设计中考虑局部疲劳需求;根据疲劳寿命要求,用裂纹扩展分析程序AFGROW确定了一个新的强度准则...     

基于数字钟设计的单片机课程项目开发

为了让学生更好地掌握单片机的定时/计数器的实际应用,在单片机的项目教学中开发了8位电子钟,利用单片机的内部定时器的中断方式产生1秒的定时,通过单片机的P0口输出显示.本项目能很好地综合键盘、7段LED的动态显示和定时器的相关知识,具有较高的适用价值.     

高职高专《模拟电子技术》课程教学探索

《模拟电子技术》是电子类高职高专学生普遍感到难学的课程之一,文章归纳了该课程教学的几个关键问题,并通过对这几个关键问题的阐述和分析,调动学生学习的积极性、主动性,提高教学效果。     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.     

The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.