模具工业发展中的几个问题

叙述了对模具工业地位与作用的认识 ,分析了我国加入世贸组织对模具工业的影响 ,并提出了发展模具工业的政策措施建议。     

低波段天基雷达射频干扰机理及抑制方法

天基合成孔径雷达(SAR)是一种重要的主动遥感设备,在测绘、目标警戒、资源探测等方面具有独特的全天时、全天候优势。但由于低波段电磁频谱异常拥挤复杂,也容易受到其他无线电设备的非蓄意射频干扰(RFI)。本文针对工作于P、L波段的天基SAR系统,分析其常见的地面射频干扰源及其干扰机理,并构建典型的窄带与宽带干扰模型,比较分析了频域陷波、最小均方(LMS)算法、自适应线谱增强(ALE)、特征子空间分解与时频滤波等多种干扰抑制算法,并在卫星实测数据的基础上进行仿真验证抑制宽带干扰的有效性。仿真结果表明:时频滤波算法抑制宽带干扰效果最好,造成的信号损失最小,能够为后续天基合成孔径雷达的抗干扰算法设计提供决策依据。     

基于信息流的耦合数字卫星构建方法

针对卫星的地面测试、系统演练及在轨运行等需求,提出了基于信息流的耦合数字卫星构建方法,通过低成本、低风险、高效率的模拟硬件行为,解决了硬件未全部就绪的情况下,开展软件全生命周期的并行开发及测试;通过提供动力学、能源、热模型等耦合数学模型库,解决仿真系统和真实卫星行为差异问题,提供了在轨卫星故障链预演和分析平台.基于信息流的耦合数字卫星以虚拟处理器仿真为核心,通过硬件行为模拟,结合多物理场数字模型,扩展了数字卫星仿真的覆盖面,加强了仿真的真实性,降低了成本与风险.     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

变体平尾翼型气动外形设计方法

为了使飞机在控制飞行姿态时仍然能保持最优升阻比,提出了一种通过改变翼型形状来代替传统控制舵面来控制飞机俯仰的方法。采用伯恩斯坦多项式对机翼的翼型进行数学建模,并采用遗传算法通过空气动力学仿真对翼型进行优化得到一组在一定飞行环境下、产生附加阻力最小且随升力系数变化的翼型形状。通过对比证明在提供相同升力的情况下,变体翼比传统的控制舵面产生更小的附加阻力。根据翼型形状和升力系数的变化采用数据拟合的方法得到翼型形状控制参数随升力变化的规律。通过算例对变化规律的验证表明其可以用来作为飞行姿态控制的翼型形状变化依据。     

正电子素络合形成研究(Ⅱ)

本文讨论了不同测量条件对正电子素络合反应速度常数测定值的影响。实验结果表明,在稀溶液的条件下,使用我们特殊设计的盛装溶液的匣式容器能大大提高放射源的使用率并能完全避免放射性废水。     

Solar activity prediction studies and services in NAOC

Solar activity prediction services started in 1960’s in National Astronomical Observatories, Chinese Academy of Sciences (NAOC). As one of the members of the International Space Environment Service (ISES), Regional Warning Center of China (RWC-China) was set up in 1990’s. Solar Activity Prediction Center (SAPC), as one of the four sub-centers of RWC-China, is located in NAOC. Solar activity prediction studies and services in NAOC cover short-term, medium-term, and long-term forecast of solar activities. Nowadays, certain prediction models, such as solar X-ray flare model, solar proton event model, solar 10 cm radio flux model, have been established for the practical prediction services. Recently, more and more physical analyses are introduced in the studies of solar activity prediction, such as the magnetic properties of solar active regions and magnetic structure of solar atmosphere. Besides traditional statistics algorithms, Machine Learning and Artificial Intelligence techniques, such as Support Vector Machine (SVM) method, are employed in the establishment of forecast models. A Web-based integrated platform for solar activity data sharing and forecast distribution is under construction.     

Radar target novel characteristic detection method

In this paper, a method of radar target detection based on 2-dimensional (2D) fractal dimension is proposed. The proposed approach exploits both range information and azimuth information to estimate fractal dimension. Moreover, the approach can increase the number of the data points. The above two merits result in the fractal dimension estimated by this method is more accurate and robust than the previous method. The detection performance is also better than the previous one, which only makes use of 1-dimensional (1-D) information to estimate fractal dimension. Theoretical analysis and experimental result show that the proposed method performs well in strong clutter background. The proposed method is also validated by real-life radar data, and the better result has been achieved.     

提高花键加工精度的工艺研究

发动机中力及扭矩的传递全部通过渐开线花键副来实现,由于发动机工作转速高,因而要求渐开线花键副传动非常平稳。通过本工艺方法的探索,采用新的工艺加工方法,提高了涡轮泵叶轮、轴的花键加工精度,保证了涡轮泵装配性能的要求。