Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

开放式飞行任务规划方法

本文给出了一种基于分布式黑板结构的开放式飞行任务规划方法，简要叙述了飞行器飞行任务规划的概念和其独特要求，并对飞行任务规划的数据预处理、知识表达、规划方法作了深入的探讨。最后介绍了分布式黑板的结构和运行方式。     

纤维缠绕复合材料壳体中金属嵌件的受力分析及优化设计

本文对一纤维缠绕复合材料壳体中金属嵌件进行了受力分析及形状设计。通过受力分析与设计使得复合材料与金属嵌件接触面应力分布合理化，保证了接触面的变形协调，得到了优化的金属嵌件形式。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

态势评估领域知识的表示方法研究

从分析态势评估专家系统的结构出发,研究战场态势评估知识库的构建,进而对态势评估的领域知识进行归纳,并通过示例探讨对态势评估领域知识的表示方法,同时把可信度方法引入态势评估不确定性知识的表示,给出了复合条件可信度的计算方法。     

空间相机中与大口径透镜有关的结构设计分析

某空间相机镜头在光学设计时，因透过率、吸收率等原因，为了满足光学系统要求，经过各方面平衡后，其中有一片透镜比正常径厚比设计的偏薄些。在镜头总体结构设计时，单独对该镜片及与之相配的结构件进行了有限元分析和实验检测，发现不同的结构形式对镜片面形影响不同。为了解决这一问题，在实验中进行了探讨，以保证整个相机系统满足空间相机的实用要求。     

十五升燃料铝贮箱的焊接

介绍了某型号发动机用十五升铝贮箱的焊接方法。针对铝贮箱壳体焊接中容易出现的问题,提出了相应的工艺措施和解决方法,对铝合金的焊接具有一定的参考价值。     

氨电弧喷射推力器实验和数值研究

为了证实氨电弧喷射推力器良好的工作性能，对其进行了系统的实验和数值研究。在实验研究中建立了高真空实验系统、先进的小推力测量系统和恒定电流控制系统，在数值研究中采用二阶精度无波动、无自由参数的耗散差分格式(NND格式)数值求解耦合电磁源项的扩展N-S方程组。通过实验获得了不同结构尺寸的推力器不同工作条件下的工作性能，通过数值模拟给出了推力器的流场结构，预计了其推力、比冲和推进效率。研究结果表明，氨电弧喷射推力器工作性能良好，能够担负一定的空间应用任务。