泡沫铝合金镀镍工艺研究

本文研究了在高硅铸铝制备的泡沫铝合金样品上镀镍工艺,提出了一种确定泡沫铝合金表面积的方法。讨论了主盐、还原剂、络合剂、缓冲剂等配方主要成份和ｐＨ 值、温度等工艺条件对化学镀镍的沉积速度和镀层质量的影响,优化了前处理方法,从而得到了适合于泡沫铝合金的镀镍工艺。     

航天器变构型模块化可维修技术

现有可维修航天器为实现可维修能力代价大,且技术发展途径不清晰,难以推广应用。本文在对国外可维修航天器技术特点分析的基础上,从可维修体系架构、可更换功能模块体系和即插即用接口体系3方面,提出了一种可维修航天器的通用设计方法。结合所提方法,设计了一种主结构可变构型的模块化可维修航天器,阐述了所涉及的关键技术。所设计的可维修航天器以开放式机械体系、分布式异构网络体系与可补加动力体系为核心架构,以两级功能模块和三级接口为可维修载体,以较小代价实现了可维修维护能力,降低了对维修操作方的能力要求,且系统功能性能可随技术的发展动态演进。所提方法与典型设计案例可为中国可维修航天器及相应技术的发展提供参考。     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

模具工业发展中的几个问题

叙述了对模具工业地位与作用的认识 ,分析了我国加入世贸组织对模具工业的影响 ,并提出了发展模具工业的政策措施建议。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

变体平尾翼型气动外形设计方法

为了使飞机在控制飞行姿态时仍然能保持最优升阻比,提出了一种通过改变翼型形状来代替传统控制舵面来控制飞机俯仰的方法。采用伯恩斯坦多项式对机翼的翼型进行数学建模,并采用遗传算法通过空气动力学仿真对翼型进行优化得到一组在一定飞行环境下、产生附加阻力最小且随升力系数变化的翼型形状。通过对比证明在提供相同升力的情况下,变体翼比传统的控制舵面产生更小的附加阻力。根据翼型形状和升力系数的变化采用数据拟合的方法得到翼型形状控制参数随升力变化的规律。通过算例对变化规律的验证表明其可以用来作为飞行姿态控制的翼型形状变化依据。     

横越两圆柱体的传热特性

用数值方法求解绕过两圆柱的对流传热问题。贝克列数在０－５０的范围内，了四种不同间距时的传热情况。从中发现两圆柱的传热特性相互有影响，这种影响随意距变化很敏感，两圆柱中任一个的平均谢尔特数总是小于单个圆柱的。并给出了简化计算的条件与公式。     

正电子素络合形成研究(Ⅱ)

本文讨论了不同测量条件对正电子素络合反应速度常数测定值的影响。实验结果表明,在稀溶液的条件下,使用我们特殊设计的盛装溶液的匣式容器能大大提高放射源的使用率并能完全避免放射性废水。