旋转对管内流体流动的影响

本文描述了旋转管流的基本运动方程。在笛卡尔坐标系和柱坐标系中,针对两种基本的几何流动,推导出旋转情况下管内的流动方程,定义了影响旋转管流的流动和换热的两个无量纲准则数J和Ra,分析了二次流产生的原因,从而说明旋转对流动的影响以及旋转管流的运动特征。     

卫星控制系统全物理仿真

仿真是应用相似定理和类比关系来研究事物 ,也就是用模型代替实际系统进行实验和研究。在卫星控制系统仿真中 ,根据所介入的模型的不同 ,分为数学仿真和物理仿真两类。卫星控制系统全物理仿真是研制卫星过程中特有的一种仿真方法 ,它利用气浮台作为运动模拟器 ,又称为气浮台仿真。本文主要叙述卫星控制系统全物理仿真的原理和用途 ,简要介绍单轴气浮台和三轴气浮台两个全物理仿真系统的组成、主要设备的技术指标以及卫星控制系统全物理仿真的几个实例     

复合材料机尾罩减重设计

根据复合材料层压板及夹层结构设计原则提出了某飞机机尾罩复合材料设计方案,结合复合材料强度计算方法进行有限元分析及强度校核。分析结果表明:在满足静强度的前提下,与金属机尾罩相比,复合材料机尾罩重量减少28.4%。     

航空发动机过渡态全局寻优控制方法研究

为了对发动机的动态过程进行控制, 提出了一种基于SQP的全局寻优控制方法.每一步寻优过程分为长程优化和短程优化两个阶段.根据长程优化结果, 重构了关联目标函数, 在此基础上, 进行了短程优化修正, 并利用修正结果进行控制.将这种方法应用于某型航空发动机的过渡态控制中, 得到了理想的控制结果.仿真结果表明该方法能较好地解决一般局部优化方法在有纯延迟、模型失配等情况下的优化控制效果下降的问题.      

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

基于WebGIS的卫星观测计划编制系统

用户在制定卫星观测计划时,需要知道卫星的星下点位置以及遥感器对地扫描区域的信息。通常这些信息是以数值描述的形式发给用户的,不够直观。本文介绍了一种基于WebGIS的卫星观测计划编制系统,介绍了WebGIS在计划编制系统中的应用,并从系统设计、功能、利用WebGIS进行计划策略判断方案等方面进行了深入讨论。     

空间辐射环境单粒子效应研究

文章介绍了空间辐射环境对航天器电子元器件产生的单粒子效应的国内外研究情况,从环境模拟方法、模拟试验设备、单粒子效应及防护以及飞行试验等方面进行了分析比较。文章对国内研究发展提出了一些建设性的建议。     

基于不同数控系统的固定轴加工手动编程方法

根据多年的数控加工编程经验,给出了多轴加工中常用的固定轴加工方法的重要性和广阔的应用前景,并对固定轴加工进行了准确定义,阐述了固定轴加工的原理,结合实例介绍了三种常用数控系统中涉及的固定轴加工高级编程指令的编程方法。     

基于马鞍形磁场的永磁直线电机位置解算方法

针对直线电机转子位置检测低成本和较高精度的要求,提出了一种基于马鞍形磁场来获得位置信息的方法及实现过程。分析了永磁体表面的磁场分布特征,指出了利用马鞍形磁场分布曲线来解算位置信息的优点,提出了根据马鞍形磁场推算位置信息的算法流程:先测得错开相位的2条马鞍形曲线数据,划分为4个象限后建立数据库;位置检测时,运用区间搜索算法寻得实际角度所在区间;再根据精度要求,采用合适的插值算法计算得到待解算的角度。仿真结果表明:基于马鞍形磁场的位置解算,能较好地得到直线电机转子的位置信息。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.