Lunar ground penetrating radar: Minimizing potential data artifacts caused by signal interaction with a rover body

Ground-penetrating radar (GPR) is the leading geophysical candidate technology for future lunar missions aimed at mapping shallow stratigraphy (<5 m). The instrument’s exploration depth and resolution capabilities in lunar materials, as well as its small size and lightweight components, make it a very attractive option from both a scientific and engineering perspective. However, the interaction between a GPR signal and the rover body is poorly understood and must be investigated prior to a space mission. In doing so, engineering and survey design strategies should be developed to enhance GPR performance in the context of the scientific question being asked. This paper explores the effects of a rover (simulated with a vertical metal plate) on GPR results for a range of heights above the surface and antenna configurations at two sites: (i) a standard GPR testing site with targets of known position, size, and material properties, and; (ii) a frozen lake for surface reflectivity experiments. Our results demonstrate that the GPR antenna configuration is a key variable dictating instrument design, with the XX polarization considered optimal for minimizing data artifact generation. These findings could thus be used to help guide design requirements for an eventual flight instrument.     

The dynamics and control of the CubeSail mission: A solar sailing demonstration

The CubeSail mission is a low-cost demonstration of the UltraSail solar sailing concept (, ,  and ), using two near-identical CubeSat satellites to deploy a 260 m-long, 20 m² reflecting film. The two satellites are launched as a unit, detumbled, and separated, with the film unwinding symmetrically from motorized reels. The conformity to the CubeSat specification allows for reduction in launch costs as a secondary payload and utilization of the University of Illinois-developed spacecraft bus. The CubeSail demonstration is the first in a series of increasingly-complex missions aimed at validating several spacecraft subsystems, including attitude determination and control, the separation release unit, reel-based film deployment, as well as the dynamical behavior of the sail and on-orbit solar propulsion. The presented work describes dynamical behavior and control methods used during three main phases of the mission. The three phases include initial detumbling and stabilization using magnetic torque actuators, gravity-gradient-based deployment of the film, and steady-state film deformations in low Earth orbit in the presence of external forces of solar radiation pressure, aerodynamic drag, and gravity-gradient.     

Traverses for the ISECG-GER design reference mission for humans on the lunar surface

This study explores the Design Reference Mission (DRM) architecture developed by Hufenbach et al. (2015) as a prelude to the release of the 2018 Global Exploration Roadmap (GER) developed by the International Space Exploration Coordination Group (ISECG). The focus of this study is the exploration of the south polar region of the Moon, a region that has not been visited by any human missions, yet exhibits a multitude of scientifically important locations – the investigation of which will address long standing questions in lunar research. This DRM architecture involves five landing sites (Malapert massif, South Pole/Shackleton crater, Schrödinger basin, Antoniadi crater, and the South Pole-Aitken basin center), to be visited in sequential years by crew, beginning in 2028. Two Lunar Electric Rovers (LER) are proposed to be tele-robotically operated between sites to rendez-vous with crew at the time of the next landing. With engineering parameters in mind we explore the feasibility of tele-robotic operation of these LERs between lunar landing sites, and identify potential high interest sampling locations en-route. Additionally, in-depth sample collection and return traverses are identified for each individual landing site across key geologic terrains that also detail crew Extra-Vehicular Activity (EVA). Exploration at and between landing sites is designed to address a suite of National Research Council (2007) scientific concepts.     

A shadow function model based on perspective projection and atmospheric effect for satellites in eclipse

Accurate Solar Radiation Pressure (SRP) modelling is critical for correctly describing the dynamics of satellites. A shadow function is a unitless quantity varying between 0 and 1 to scale the solar radiation flux at a satellite’s location during eclipses. Errors in modelling shadow function lead to inaccuracy in SRP that degrades the orbit quality. Shadow function modelling requires solutions to a geometrical problem (Earth’s oblateness) and a physical problem (atmospheric effects). This study presents a new shadow function model (PPM_atm) which uses a perspective projection based approach to solve the geometrical problem rigorously and a linear function to describe the reduction of solar radiation flux due to atmospheric effects. GRACE (Gravity Recovery And Climate Experiment) satellites carry accelerometers that record variations of non-conservative forces, which reveal the variations of shadow function during eclipses. In this study, the PPM_atm is validated using accelerometer observations of the GRACE-A satellite. Test results show that the PPM_atm is closer to the variations in accelerometer observations than the widely used SECM (Spherical Earth Conical Model). Taking the accelerometer observations derived shadow function as the “truth”, the relative error in PPM_atm is ?0.79% while the SECM 11.07%. The influence of the PPM_atm is also shown in orbit prediction for Galileo satellites. Compared with the SECM, the PPM_atm can reduce the radial orbit error RMS by 5.6?cm over a 7-day prediction. The impacts of the errors in shadow function modelling on the orbit remain to be systematic and should be mitigated in long-term orbit prediction.     

A simulation study for anticipated accuracy of lunar gravity field model by SELENE tracking data

Results of numerical simulations are presented to examine the global gravity field recovery capability of the Japanese lunar exploration project SELENE (SELenological and ENgineering Explorer) which will be launched in 2007. New characteristics of the SELENE lunar gravimetry include 4-way satellite-to-satellite Doppler tracking of main orbiter and differential VLBI tracking of two small free-flier satellites. It is shown that the proposed satellite constellation will provide the first truly global satellite tracking data coverage. The expected results from these data are; (1) drastic reduction in far-side gravity error, (2) estimation of many gravity coefficients by the observation, not by a priori information, and (3) one order of magnitude improvement over existing gravity models for low-degree field.     

Initiation of spherical detonation in hydrocarbon/air mixtures

Spherical detonations have been initiated by solid explosive (Tetryl) charges in well-mixed stoicheiometric air mixtures with each of the hydrocarbons, ethane, propane, n-butane, isobutane and ethylene at atmospheric pressure. Prior to initiation, the gases were contained in plastic bags; total gas volume and available path length were up to 1.6 m³ and 2 m, respectively. The detonations were shown to be self-sustained by continuous measurement of detonation velocity using X-band microwave interferometry. Measured detonation velocities were in all cases close to calculated C-J values.In a few experiments close to the limits of detonability, velocity and blast pressure/time records indicated that the propagating wave system is sometimes irregular. The irregularity that occurs just after initiation is characterised by a reaction front velocity very much lower than the constant detonation velocity, but subsequently attaining the latter by an acceleration process. These observations indicate the existence of a dissociated phase in which shock and reaction fronts may no longer be coupled.Because similar experimental conditions were used throughout, it was possible to establish the relative susceptibilities of the various fuel gases to detonation. Comparison is made with the Zeldovich criterion and a detonation kernel theory of Lee.     

An alternative to Hermes a solution for the European space industry

A variety of valuable roles can be foreseen during the next two decades for a reusable, piloted launch vehicle with a small payload. The authors argue that unfortunately, as currently proposed, the Hermes-Ariane 5 vehicle will not be able to fill the roles required. The authors propose a reusable aerospace transporter-a variant of Hermes - which will provide a solution and allow Europe to take the lead in developing the first fully reusable launch vehicle.