Measuring Techniques Applied in an MHD-Augmented Shock Tunnel

The determination of the detailed performance of an MHD-augmented high-enthalphy shock tunnel requires the simultaneous measurment of a large number of aerodynamic, electrical, and electromagnetic parameters in a test time interval of the order of several hundred microseconds. In the feasibility study currently being conducted in our laboratory of such a device, an extensive measuring system was set up and evaluated, and is being used to acquire facility performance data. This paper describes this measuring system, discusses the modifications and adaptations applied to make the various components of the system operable and compatible, and gives illustrative examples of the performance of the system.     

A Brief History of CME Science

We present here a brief summary of the rich heritage of observational and theoretical research leading to the development of our current understanding of the initiation, structure, and evolution of Coronal Mass Ejections.     

The Genesis Solar Wind Concentrator

The primary goal of the Genesis Mission is to collect solar wind ions and, from their analysis, establish key isotopic ratios that will help constrain models of solar nebula formation and evolution. The ratios of primary interest include ¹⁷O/¹⁶O and ¹⁸O/¹⁶O to ±0.1%, ¹⁵N/¹⁴N to ±1%, and the Li, Be, and B elemental and isotopic abundances. The required accuracies in N and O ratios cannot be achieved without concentrating the solar wind and implanting it into low-background target materials that are returned to Earth for analysis. The Genesis Concentrator is designed to concentrate the heavy ion flux from the solar wind by an average factor of at least 20 and implant it into a target of ultra-pure, well-characterized materials. High-transparency grids held at high voltages are used near the aperture to reject >90% of the protons, avoiding damage to the target. Another set of grids and applied voltages are used to accelerate and focus the remaining ions to implant into the target. The design uses an energy-independent parabolic ion mirror to focus ions onto a 6.2 cm diameter target of materials selected to contain levels of O and other elements of interest established and documented to be below 10% of the levels expected from the concentrated solar wind. To optimize the concentration of the ions, voltages are constantly adjusted based on real-time solar wind speed and temperature measurements from the Genesis ion monitor. Construction of the Concentrator required new developments in ion optics; materials; and instrument testing and handling. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.     

Development of the Primary Sorption Pump for the SEIS Seismometer of the InSight Mission to Mars

We report on the development of a passive sorption pump, capable of maintaining high-vacuum conditions in the InSight seismometer throughout the duration of any extended mission. The adsorber material is a novel zeolite-loaded aerogel (ZLA) composite, which consists of fine zeolite particles homogeneously dispersed throughout a porous silica network. The outgassing species within the SEIS evacuated container were analyzed and the outgassing rate was estimated by different methods. The results were used to optimize the ZLA composition to adsorb the outgassing constituents, dominated by water, while minimizing the SEIS bakeout constraints. The InSight ZLA composite additionally facilitated substantial CO₂ adsorption capabilities for risk mitigation against external leaks in Mars atmosphere. To comply with the stringent particle requirements, the ZLA getters were packaged in sealed containers, open to the SEIS interior through \(1~\upmu\mbox{m}\)-size pore filters. Results from experimental validation and verification tests of the packaged getters are presented. The pressure forecast based on these data, corroborated by rudimentary in situ pressure measurements, infer SEIS operational pressures not exceeding \(10^{-5}~\mbox{mbar}\) throughout the mission.     

Past and future of radio occultation studies of planetary atmospheres

Measurements of radio waves that have propagated through planetary atmospheres have provided exploratory results on atmospheric constituents, structure, dynamics, and ionization for Venus, Mars, Titan, Jupiter, Saturn, and Uranus. Highlights of past results are reviewed in order to define and illustrate the potential of occultation and related radio studies in future planetary missions.     

Impact of loading effects on determination of the International Terrestrial Reference Frame

The International Terrestrial Reference Frame (ITRF), as a realization of the International Terrestrial Reference System (ITRS), is represented by a set of station positions and linear velocities. They are intended to be used as regularized coordinates to which some corrections should be added to access instantaneous coordinates. The latest ITRS realization is the ITRF2005, which has integrated time series of station positions to form long-term solutions for the four space geodetic techniques. Currently, a purely linear model is used to parameterize station displacements in the estimation process, plus occasional discontinuities in case of earthquakes or equipment changes. However the input data have been derived without applying surface loading models and so surface loading effects are supposed to be embedded in the coordinates as measured quantities. We evaluate the effect of applying a posteriori loading corrections, which include the effect of atmospheric, non-tidal ocean, and continental water loading, to time series of positions estimated from Satellite Laser Ranging (SLR), Very Long Baseline Interferometry (VLBI), and Global Positioning System (GPS) data. We notice that they reduce about 50% or more of the annual signals in the translation and scale parameter time series of the SLR and VLBI techniques, except in SLR Z translation. In general, the estimated secular frame definition is negligibly affected and estimated positions and velocities are not significantly modified for stations that have accumulated a large number of observations. A multi-technique combination of such derived frames allows concluding that, for some cases, loading model corrections might degrade co-located station coordinates almost as much as they benefit them. However, most significant improvement of the estimated secular coordinates is observed for stations with less than 100 estimated positions as demonstrated with a multi-technique combination.     

Effect of Processing and Composition on the Structure and Properties of P/M EP741NP Type Alloys

A study was carried out on the effects of processing and composition on the structure and properties of P/M EP741NP type alloys. The objectives of this study were to understand the role of Hf in a P/M superalloy containing high niobium used in aircraft engines and to determine the effects of extrusion and forging the powders as contrasted to HIPing (hot isostatic pressing) only. Two alloys of the P/M EP741NP composition were atomized: one alloy contained 0.26%Hf and the other was Hf free. After the as-atomized powders from both alloys were characterized, the powders were extruded into billets, forged and heat treated. After each process, the microstructures were characterized by SEM and the phases were extracted and identified by X-ray diffraction. The presence of Hf in the residues was probed by EDS (energy dispersive spectroscopy). The alloys were given the published Russian heat treatment as well as a more conventional heat treatment more typical of western powder alloys. Tensile, creep and stress rupture mechanical property tests were run. Results of the structural behavior of the alloys after each processing step will be presented and discussed. The role of the Hf on the mechanical proper- ties will be discussed.