Day-to-day variability of equatorial anomaly in GPS-TEC during low solar activity period

The ionospheric total electron content (TEC) in the northern hemispheric equatorial ionization anomaly (EIA) crest region is investigated by using dual-frequency signals of the Global Positioning System (GPS) acquired from Rajkot (Geog. Lat. 22.29°N, Geog. Long. 70.74°E; Geom. Lat. 14.21°N, Geom. Long. 144.90°E), India. The day-to-day variability of EIA characteristics is examined during low solar activity period (F10.7∼83 sfu). It is found that the daily maximum TEC at EIA crest exhibits a day-to-day and strong semi-annual variability. The seasonal anomaly and equinoctial asymmetry in TEC at EIA is found non-existent and weaker, respectively. We found a moderate and positive correlation of daily magnitude of crest, Ic with daily F10.7 and EUV fluxes with a correlation coefficient of 0.43 and 0.33, respectively indicating an existence of a short-term relation between TEC at EIA and the solar radiation even during low solar activity period. The correlation of daily Ic with Dst index is also moderate (r = −0.35), whereas no correlation is found with the daily Kp index (r = 0.14) respectively. We found that the magnitude of EIA crest is moderately correlated with solar flux in all seasons except winter where it is weakly related (0.27). The magnitude of EIA crest is also found highly related with EEJ strength in spring (r = 0.69) and summer (r = 0.65) than autumn (0.5) and winter (r = 0.47), though EEJ is stronger in autumn than spring.     

“嫦娥二号”卫星L2点角动量管理

对“嫦娥二号”(CE-2)卫星进入环绕日地拉格朗日L2点的李萨如轨道后卫星喷气卸载所产生的影响进行了研究.提出了一种利用光压力矩辅助卫星太阳电池翼角度调整进行角动量管理的方法.在轨试验表明,太阳光压强度足够对飞行在L2点环绕轨道上的CE-2卫星进行角动量管理,可以大幅度减少动量轮在轨喷气卸载的次数,有利于CE-2卫星的轨道维持.     

新型电子束焊机阴极加热电源自动调节系统

开发了一种新型电子束焊机阴极加热电源自动调节系统,包括新型主电路拓扑和对应控制策略,该系统能够使阴极处在最佳加热电流状态,从而提高电子束流稳定性.并且在检测到电子枪未加高压时,阴极加热电流自动关闭,在加有高压但束流给定为零时,阴极加热电流自动减少,能大幅增加阴极的使用寿命.经试验证明该系统相比传统阴极加热电源操作简洁、快速和准确,对焊缝成形质量好.     

液力自动变速器传动系统建模与换挡特性仿真

根据液力自动变速器换挡过程中操纵件的动态特性,建立换挡过程的动力学模型.建立以转速、节气门开度和驱动模式为参数的发动机模型.依据整车参数,设计换挡规律,提出换挡过程中操纵件的油压控制方法.基于MathCAD数学软件,建立包含驾驶员、机械系统和控制系统等完整的动力传动系统虚拟样机.仿真结果表明,建立的仿真原型与平台可预测传动系统在多种工况下相应动态特性,为换挡规律与换挡品质的仿真提供一个合理的解决方案.     

发动机羽流作用下的实时月尘运动仿真

月尘运动是月球探测器软着陆过程中不可或缺的重要环节,针对发动机羽流作用下月尘运动真实感不强和月尘颗粒运动模型过于简单的问题,提出了一种逼真的实时月尘运动仿真方法.通过计算流体动力学(CFD, Computational Fluid Dynamics)和二次谢别德插值(Quadratic Shepard)方法,分析和计算单个月尘颗粒的运动学模型,得到一定初始条件下粒子运动的二维轨迹曲线;通过分析粒子的数量、初始位置、初始速度、生命周期等参数对粒子运动学的影响和变化规律,抽象出月尘系统的粒子集;建立基于月尘粒子集的月尘运动模型.实验结果显示:该运动模型逼真的模拟了发动机羽流作用下月尘腾起、飞溅、弥漫、消散等运动过程,视觉真实感和实时性能良好,对研究真空环境中的月尘运动及月球软着陆等相关领域具有一定的参考意义.目前该方法已应用于北航虚拟现实国家重点实验室月球软着陆仿真系统.     

Report on the Kiso cometary dust trail survey

Cometary dust trails were first observed by IRAS; they are widely known to be the origins of meteoric showers. A new window has been opened for the study of dust trails, using ground-based observations. We succeeded in obtaining direct images of the 22P/Kopff dust trail with the Kiso 1.05-m Schmidt telescope. Following this initial success, we have continued to perform a dust trail survey at Kiso. As a result of this survey, we have detected dust trails along the orbit of six periodic comets, between February 2002 and March 2004. The optical depth of these dust trails are 10⁻⁹ to 10⁻⁸, which is consistent with IRAS measurements. In this paper, we describe the observations and data reduction procedures, and report the brief result obtained between February 2002 and March 2004.     

基于图像对的体视显示算法研究与实现

依据摄像机拍摄的左右两幅图像,按照提出的算法进行图像的矫正、重采样和图像对间的密集匹配,最后通过图像插补输出符合双眼特性的体视图像,试验证明插补后体视图像效果较好.     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.