Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

通用航空FBO经营发展的基本模式

FBO经营发展具有多种商业形态,而当前国外通航发达国家FBO经营发展具有较为成熟的模式,国内FBO发展还处在起步阶段,必须学习借鉴国外的成熟模式,通过不同的方式尽快使经营走向成熟。同时,国内FBO又需要根据内外部发展环境,创新自身经营模式,更好地推进通用航空FBO的发展。     

Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k x shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally,a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters(forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays) on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies(the best lift-drag ratio at F+= 2.0) and jet angles(40 or 75) when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by26.5% in comparison with the single point control case.     

数控机床铣螺纹用盘形铣刀的近似造型及误差计算

在数控铣床上加工螺纹，需要设计盘形铣刀，本文求导了铣刀宽度计算公式，分析了产生误差的原因，并提出了改进措施。     

新世纪航空机载设备制造技术展望

介绍了国内外航空机载设备制造技术的现状 ,展望了 2 1世纪航空机载设备制造技术的发展趋势 ,提出了发展我国航空机载设备制造技术的设想。     

基于多核融合的目标大面积遮挡处理方法

提出了一种基于多核融合的目标遮挡处理方法,用于提高大面积遮挡情况下视觉目标跟踪算法的鲁棒性和准确性.与现有基于单个对称核加权直方图的mean shift跟踪算法不同,该方法以目标区域内的多个非中心位置为核函数中心,构建多个非对称核加权直方图.由于这些直方图对目标的不同区域赋予了不同的权重,使得在遮挡发生时总存在一些直方图受影响较小.依据各个直方图分别进行mean shift迭代获得一组目标位置估计后,利用D-S证据理论融合判定最终的目标位置.实验结果表明,该方法在目标被大面积遮挡时仍能够获得准确的跟踪.     

航天器总装过程特种车辆运输问题的研究

文章针对航天器总装过程所涉及的特种车辆转运问题进行研究。通过对特种车辆种类和航天器各平台总装涉及特种车辆数量分析,提出集装箱运输方案并对集装箱进行设计、实施,取得了良好效果,同时指出集装箱化运输也是航天器工装运输的趋势。     

基于DFT快速算法对扩频码捕获过程的优化

针对基于FFT的频域捕获方法采样点数必须为2的整数次幂的局限性,应用Colley-Tukey和Good-Thoma算法对DFT求解过程进行分解,并引入Winograd DFT算法将短点数DFT优化从而得到一种改进算法。利用改进算法对GPS的L5频段上扩频码捕获进行了仿真分析。与FFT算法相比,改进算法在保证精度和灵敏度的同时,降低了计算量,提高了信号捕获速度。     

模板类零件孔系的计算机辅助设计

本文介绍子模具设计中的模板类零件中的孔系的计算机辅助设计,对于位置参数相同而结构和尺寸不同的孔系零件,可以由一个孔位置定义文件设计所有的零件.零件用这种方法可以很方便地提高设计速度和设计质量.     

一种新型恒温—温补晶体振荡器

提出了一种ＯＣＸＯ的恒温控制方法。该方法是利用乙醇的沸点制成换态式恒温箱。这种温度控制方法既可以用作中准确度的ＯＣＸＯ，又可以作为精密双层控温ＯＣＸＯ的外层恒温装置，还可以与简单的温补线路结合，构成高准确度的ＯＴＣＸＯ。